#8 in Automotive engine parts
Use arrows to jump to the previous/next product
Reddit mentions of Supercrazy M13 X 1.5MM Oil Pan Drain Plug Thread Repair Tool Kit SF0087B
Sentiment score: 1
Reddit mentions: 2
We found 2 Reddit mentions of Supercrazy M13 X 1.5MM Oil Pan Drain Plug Thread Repair Tool Kit SF0087B. Here are the top ones.
Buying options
View on Amazon.comor
- 【Applicable】M13 x 1.5mm oil drain plug thread repair tool kit used to tap the damaged thread and slightly enlarge the diameter of oil drain hole, then fit a new drain plug and washer. Ideal for repairing sump, gearbox and differential drain plug threads.
- 【Feature】Tap: M13 x 1.5mm 1pc, Screw: M13 6pc, Aluminum gasket: M13 6pc.
- 【Suitable】Suitable for 12mm engine oil screw after skidded and rethread by 13mm chaser then twist into 13mm screw and gasket.
- 【Packing】 Comes within a blow moulded case.
Features:
Specs:
Color | 7pcs |
Size | M13 x 1.5MM |
I did this on my Bandit 1250. I didn't pull the oil pan (4-5 hours of work to do so: have to remove radiator, full exhaust, lot of other pieces). I rented a Time Sert kit in M14x1.25 (Bandit's drain plug size) for $25 + refundable deposit + cost of sleeves (I bought 2). Time Sert may be really expensive, but it is a REALLY REALLY REALLY good tool. I fixed my drain plug in about 15 minutes. Drilled out the hole, rethreaded it per instructions, ran a gallon of rotella through it, put red locktite on the insert, and it has been solid through 2 oil changes so far. I was beyond impressed with Time Sert.
Not sure if they offer an M12x1.5 (KLR) size, but worth a look. on Amazon it's $95, but I would called them and ask if they have an M12x1.5 kit available. aircooled.net link
Alternatively, there are Helicoil and Perma-Coil thread repair kits.
3rd option is to drill it out to a size larger and tap it out, get a new drain plug. Either to M13 x 1.5 or M14 x 1.5. Found this kit on Amazon, you'll have to source your own drill bit, naturally.
Call Eagle Mike, see if he has any repair kits or recommendations.
Check with a local auto shop if they have a time sert in m12 x 1.5 kit and if they'd let you use it. You'll need to get your own sleeve inserts. Autozone may have a rental for you.
Do the redneck thing, put a shitload of high temp silicone on the drain plug, sell the bike to some poor sap. No, don't do that.
Supercrazy M13 X 1.5MM Oil Pan Drain Plug Thread Repair Tool Kit SF0087B https://www.amazon.com/dp/B00V0R7KQ4/ref=cm_sw_r_cp_apip_9ZVJKNF9USKss
This worked well for me on an x5 with aluminum pan. Use some Teflon tape on the drain plug and you should be fine.