#2 in Powerspots wiring harnesses
Use arrows to jump to the previous/next product
Reddit mentions of Universal Plug-n-Play Wiring Harness for Motorcycle Air Horns
Sentiment score: 1
Reddit mentions: 2
We found 2 Reddit mentions of Universal Plug-n-Play Wiring Harness for Motorcycle Air Horns. Here are the top ones.
or
Works great with Wolo Bad Boy & Stebel Nautilus Air HornsEverything pre-assembledHeavy-duty 30 Amp relay20 Amp fuse14 feet of Heavy-duty wire
Specs:
| Size | 44.7CC |
For starters your terminology is wrong. A honda shadow does not use clutch fluid. A master cylinder has nothing to do with the clutch.
1.) Clutch Issue - your bike uses a wet clutch, meaning the clutch plates are soaked in the same oil as your engine. The "engine oil" is what you should need to change. I recommend using Shella Rotella T. You can buy it at WalMart and it's rated for wet clutch bikes, don't get the synthetic version. Your master cylinder is for your front brake. Use DOT 4 or 5 fluid, check manual. If your unable to bleed the system and get all the air out then you may very well need to rebuild it.
2.) Ignition, starter won't crank without engine running, this means your battery was shot. Had no juice or CCA (Cold Crank Amps). I would avoid jumping the solenoid. Just ebay a new/used one.
3.) Horn - Mount it anywhere secure. Not sure if you noticed but you'll need to get the harness for that horn (https://www.amazon.com/Universal-Plug-n-Play-Wiring-Harness-Motorcycle/dp/B0028ZKMM6/ref=pd_bxgy_263_img_2?ie=UTF8&refRID=AEDYQ957XTTS0TBNDYMD)
you need a relay. I used this wiring kit to install mine. super simple and totally worth the 20 bucks.