#4,785 in Automotive
Use arrows to jump to the previous/next product
Reddit mentions of Wirenest Micro2 ATR Fuse Tap 16awg with 15A Fuse
Sentiment score: 1
Reddit mentions: 1
We found 1 Reddit mentions of Wirenest Micro2 ATR Fuse Tap 16awg with 15A Fuse. Here are the top ones.
or
Micro2 ATR Fuse tap easily adds another fused circuit.5 inch 16awg wire with an insulated crimp butt connector.Easy to install into ATR fuse blocks. Insert into any used or unused (powered) location on fuse block.Includes 15A fuse.Bottom fuse holder protects existing circuit, top fuse holder protects new addtional circuit.
Specs:
Sounds like a job for an add-a-circuit fuse tap, relay and hardwired into the battery.
Find a fuse that is only powered with the ignition. From there use that as the signal on the relay. Then when the truck turns on, the relay will open and power the plug. Something like the running lights would work.
Supplies you'll want is either a Mini2 blade or micro2 blade fuse tap, depending on what the fuse is. A 12v cigarette lighter plug, and a wiring harness that is long enough to reach the bed from the engine bay. You can also extend it if needed easily. Just dont use the switch, as that will be powered by the fuse tap.
EDIT: I've done something similar except it powers my dashcam. https://imgur.com/a/t95ia
Since it wasnt pulling too much power, I didnt worry about putting a relay in the mix.