Reddit mentions: The best reamers
We found 63 Reddit comments discussing the best reamers. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 5 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Grizzly H5890 Repairman's Taper Reamer
- Handle measures 3-1/2" long
- Removable handle for compact storage
- Seven flutes for smooth bores
Features:
Specs:
Height | 0.6 Inches |
Length | 0.8 Inches |
Number of items | 1 |
Width | 5.1 Inches |
2. KYOCERA MR34-0921.438 Series MR34 Micro Reamer, Carbide, Uncoated, 4 Flute, 3 mm Shank Diameter, 11 mm Flute Length, 2.34 mm Cutting Diameter, 50 mm Length
- 3.00mm Shank
- 4 Flute
- Micro Reamer
- Left-Hand Spiral
- Right-Hand Cutting
Features:
Specs:
Number of items | 1 |
Release date | November 2017 |
Weight | 0.1 Pounds |
3. RIDGID 34945 2 Straight Pipe Reamer, 1/8-inch to 2-inch Pipe Reamer Tool
- Features a long, tapered design that will not dig in
- The model S reamer is suitable for use with power drives
- Rugged construction stands up to jobsite demands
- Pipe reamer has a 1/8-inch to 2-inch (3 mm to 50 mm) outside diameter capacity
Features:
Specs:
Color | Silver/Red |
Height | 0 Inches |
Length | 0 Inches |
Number of items | 1 |
Size | Small |
Weight | 6.94 Pounds |
Width | 0 Inches |
4. Drill America 1/2" High Speed Steel Straight Shank Machine Expansion Reamer, DWR Series
- Finish type: Bright
- Package Weight : 1 pounds
- Country of Origin : China
- Finish type: Bright
Features:
Specs:
Height | 2 Inches |
Length | 6 Inches |
Number of items | 1 |
Size | 1/2 in |
Width | 4 Inches |
🎓 Reddit experts on reamers
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where reamers are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Definitely, any machine shop will have drills or reamers that can get that to where you want it to be. It probably wont cost more than a couple bucks for them to set up the machines and do the work. If you care more about the end product than the process, that is the route I would go.
Alternatively, you could get a reamer yourself and expand the hole to where you want it. Find the right size of something like http://www.amazon.com/Grizzly-H5890-Repairmans-Taper-Reamer/dp/B0002U8BZO and then ream away! What you are looking for is going to be called a repairman's taper reamer.
A third option would be to glue something across the face of that hole, smaller than your end hole, and use the hole saw as usual. Basically plug the hole and redrill.
Get yourself a hand reamer. It is less than $10 on Amazon. A drill sometimes has too much torque.
http://www.amazon.com/gp/aw/d/B0002U8BZO/ref=s9_topr_hm_bHLOot_g469_i1
You're looking for someone to buy you this and then ship it to you?
If so, I can possibly help you out as long as you're covering cost of item/shipping to me in the USA and then shipping to you from US to Hungary.
Let me know if you don't find any less expensive/more direct method in a few days.
Get the Kyocera reamer recommended on other threads
KYOCERA MR34-0921.438 Series... https://www.amazon.com/dp/B01L9U5VSA?ref=yo_pop_ma_swf
Could be a reamer to deburr the inside of a pipe after cutting.
​
Found a modern version:
https://www.amazon.com/RIDGID-34945-Straight-Reamer-8-inch/dp/B0019MPG1Q
​
And an old one that looks similar to yours:
https://www.ebay.com/c/1934172091
You could just use a slightly larger drill bit, or an actual reamer bit if you want to be fancy.
Drill America 1/2" High Speed Steel Straight Shank Machine Expansion Reamer, DWR Series https://www.amazon.com/dp/B01BNKEHMM/ref=cm_sw_r_cp_apa_i_42UzCbV4N5DAA
I would say you'd be better off using a pillow bearing block though.
PGN - UCP201-8 Pillow Block Mounted Ball Bearing - 1/2" Bore - Solid Cast Iron Base - Self Aligning (2 Pack) https://www.amazon.com/dp/B07MWBY7N9/ref=cm_sw_r_cp_apa_i_53UzCbQ53R5EB