#14,902 in Electronics
Reddit mentions of Enokay 8 Pieces 14mm×12mm×5.5mm Cooling Copper Heatsink for Raspberry Pi VGA RAM Cooling Heatsinks Cooler
Sentiment score: 2
Reddit mentions: 7
We found 7 Reddit mentions of Enokay 8 Pieces 14mm×12mm×5.5mm Cooling Copper Heatsink for Raspberry Pi VGA RAM Cooling Heatsinks Cooler. Here are the top ones.
or
Pre-applied thermal conductive adhesive material; simple installationWorks on the SMCI USB/NIC controller chip. -Offer significant cooling advantage than with the heat sinksThis Copper made VGA Ram heatsinks can reduce the VGA memory or chips temperature, which prevent system failure.Package included: 8 pcs copper heatsinksProduct size:14*12*5.5mm
Specs:
| Color | Gold |
| Height | 5.4 Inches |
| Length | 7.5 Inches |
| Number of items | 1 |
| Width | 0.6 Inches |
vrams
vrms
Enokay 8 Pieces Cooling Copper Heatsink for Raspberry Pi VGA RAM Cooling Heatsinks Cooler https://www.amazon.com/dp/B014KKY3KI/ref=cm_sw_r_cp_apap_XN8B9Nfs1I38i
There are better ones but I was being cheap.
You can do a hybrid cooler setup which generally costs $125-150 to do properly. NZXT G10, Corsair H55, copper heatsinks for the VRM's, thermal adhesive to permanently attach them, and the adapter cable to let the card control the radiator fan.
https://www.amazon.com/NZXT-Kraken-RL-KRG10-B1-Bracket-Black/dp/B00ITTFO8M
https://www.amazon.com/Corsair-Hydro-Quiet-Liquid-Cooler/dp/B009VV56TY
https://www.amazon.com/Enokay-Cooling-Heatsink-Raspberry-Heatsinks/dp/B014KKY3KI
https://www.amazon.com/Arctic-Alumina-Thermal-Adhesive-5g/dp/B0009IQ1BU
https://www.amazon.com/Gelid-CA-PWM-02-Adapter-Sleeved-Cooler/dp/B005ZKZEQA
A custom loop just for the GPU can be done with about $350. This will be a lower noise/temperature solution and offers the possibility of expansion but obviously also costs more.
https://www.ekwb.com/shop/ek-fc-1080-gtx-ti-nickel - $130.
https://www.ekwb.com/shop/ek-coolstream-pe-240-dual - $62.
https://www.ekwb.com/shop/ek-xres-100-ddc-mx-3-1-pwm-incl-pump - $100
https://www.ekwb.com/shop/tube-primochill-primoflextm-advanced-lrttm-onyx-black - $8.
https://www.ekwb.com/shop/ek-hfb-fitting-10mm-nickel - $21 for 6.
https://pcpartpicker.com/product/b2vRsY/noctua-case-fan-nff12pwm - $38 for 2.
Enokay 8 Pieces Cooling Copper Heatsink for Raspberry Pi VGA RAM Cooling Heatsinks Cooler https://www.amazon.com/dp/B014KKY3KI/ref=cm_sw_r_cp_apa_qkngzbB7Q1HDH
Got those. And they fit perfectly on my Rx 480 chips.
Hopefully that, or similar, works for .ca
I just installed the Kraken G12 on my Zotac RTX 2070 Super Twin fan. Had to use the "A" brackets, but it worked right out of the box. No modification to the bracket or card needed. Installed in my rig: https://imgur.com/a/fU91Bc5
I didn't like the idea of the fan just blowing air directly on the exposed VRMs or GDDR6 chips, so I re-used the thermal pads from the Zotac stock heatsink, then applied copper heatsinks to the VRAM modules, and tinier aluminum heatsinks to the VRMs.
Copper heatsinks: https://www.amazon.com/gp/product/B014KKY3KI/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Aluminum heatsinks: https://www.amazon.com/gp/product/B06XRBXQWC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Only thing I might do in the future is get more thermal pads so I can re-attach the Zotac backplate and get some heat off the back of the memory chips away from the board.
Here are the links to the different heatsinks
https://www.amazon.com/gp/product/B07GN969QM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B014KKY3KI/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B007XACV8O/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B007XACV8O/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1 - I used these for the vrm
https://www.amazon.com/gp/product/B014KKY3KI/ref=oh_aui_detailpage_o01_s02?ie=UTF8&psc=1 - I ordered 2 sets of these for the memory chips