#30 in Gardening & lawn care products

Reddit mentions of iPower GLFILT6M 6 Inch Air Carbon Filter Indoor Plants Grow Tent Odor Control Scrubber with Australia Activated C for Inline Fan, Reversible Flange, Prefilter Included, 6"

Sentiment score: 11
Reddit mentions: 18

We found 18 Reddit mentions of iPower GLFILT6M 6 Inch Air Carbon Filter Indoor Plants Grow Tent Odor Control Scrubber with Australia Activated C for Inline Fan, Reversible Flange, Prefilter Included, 6". Here are the top ones.

iPower GLFILT6M 6 Inch Air Carbon Filter Indoor Plants Grow Tent Odor Control Scrubber with Australia Activated C for Inline Fan, Reversible Flange, Prefilter Included, 6
Buying options
View on Amazon.com
or
    Features:
  • Effective odor control: protects from chemical irritants and eliminates odors from bathrooms, basements and kitchens. Absorbs odors from pets and smoking, pungent smell and particulates from indoor grow tent.
  • Versatile applications: item can be used as intake or exhaust filter in a variety of setups including use with inline fan and duct fans, intake and exhaust fans, air exchange fans, ventilation ducts, and other accessories.
  • Specs: air flow: 400CFM; size: 6inch; flange ducting: 16inch length. 1050+ IAV Australian RC412 activated carbon: one of the world's most absorbent carbon available.
  • Reversible flange and base: the flange and bottom can be removed to reverse the charcoal canister, allowing the filter body to be flipped upside-down for reversible smell filtration and an extended service life.
  • Pre-filter included: we recommend replace the pre-filter every 6 months to protect your filter.
Specs:
ColorSilver
Height10.5 Inches
Length17 Inches
Number of items1
Size6" Filter
Weight11 Pounds
Width10.5 Inches

idea-bulb Interested in what Redditors like? Check out our Shuffle feature

Shuffle: random products popular on Reddit

Found 18 comments on iPower GLFILT6M 6 Inch Air Carbon Filter Indoor Plants Grow Tent Odor Control Scrubber with Australia Activated C for Inline Fan, Reversible Flange, Prefilter Included, 6":

u/AndysPanties · 44 pointsr/bestof

These carbon filters are used mostly in commercial spaces. In the United States they are commonly found in marijuana grow houses to move air outside. A carbon filter removes a high percentage of odors to reduce the risk of detection.

I like them in my home because I'm not a fan of buying other scented products that "mask" smells. When I walk into my home and my carbon filter is on it smells clean. I'm not sure if that clean smell is due to something from the carbon? Either way it's a clean, crisp smell that many people comment on and cannot be replicated by chemicals.

Cons: inline fans are loud and the system is a little bulky. Noise can be reduced by adding ducting to the end or buying insulated fans as referenced below.

Pros: I breath amazing air. You can cook/smoke inside your home and it's still going to smell amazing!

Filter: https://www.amazon.com/gp/aw/d/B008NYF8S4/ref=ya_aw_od_pi?ie=UTF8&psc=1

Quiet fan: https://www.amazon.com/gp/aw/d/B00EIRU2YU/ref=ya_aw_od_pi?ie=UTF8&psc=1

u/brad854 · 4 pointsr/microgrowery

I used a 6" filter that worked nice for me, I'm sure they have a 4" version

https://www.amazon.com/gp/product/B008NYF8S4/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

u/ismann · 2 pointsr/SpaceBuckets

I wouldn't waste time with that item. You'll ideally want a carbon scrubber to scrub the air directly out of the bucket if you're worried about smell. I'm not saying that won't work, but the smell will already be in the air of the room which is what you're trying to avoid. You'll want a fan sucking the air out of the bucket and directly into a scrubber.

You can either make one which many here have done, including me, or you can get a scrubber such as this: http://www.amazon.com/gp/product/B008NYF8S4
and use a fan strong enough to push air through it.

I clamped my scrubber to a 6-to-4 inch rubber reducer like this: http://www.bestmaterials.com/images2/fernco-reducer-large.jpg
and it just sits on top of my bucket. The fan pushes the air right through and not a whiff of any herb can be smelled.

u/francoruinedbukowski · 2 pointsr/trees

A small 6 inch carbon filter with intake. I actually used this brand and many of their larger sizes. Intake should be 6" and cost appx. $40, worth it , electric is minimal clears the air of your whole apt (if under 600) you will actually notice cleaner air (I'm in LA and these have always made a diff from my small college apt by the freeway to the house I live in the hills now, would never grow without a nice carbon filter set up even when I move to Mendocino (Plus They create a nice ambient sound, increase C02 (bud size) and you should cut down on mold issues) not sure what part of the world you are in but filters in humid or arid, small or large grow, are key and worth the small investment for several reasons) If you're skeptical do some research.

https://www.amazon.com/iPower-Charcoal-Prefilter-Included-Reversible/dp/B008NYF8S4/ref=sr_1_3?ie=UTF8&qid=1501722851&sr=8-3&keywords=6+carbon+filter

u/OrganicThrow · 2 pointsr/microgrowery

I have that Variac and vortex combo and love it; look for the amazon used section I pick it up for 110 instead. I have this fan and it works wonderful for a 2 x 4 tent PACKED TO THE FUCKING BRIM with plants. Tis cheaper. Edit: it's the one you linked... woops!

I'm just tossing it out there that you can pay with amazon prime card on rapid LED and get this vastly superior light I was told of tonight. I used the prime credit card to get LEDs there. ;)

What are you going to put the plants in?

u/Bhill356 · 2 pointsr/microgrowery

Not that great of a deal, but still: iPower GLFILT6M Air Carbon Filter and Odor Control with 1050+ IAV Australia Virgin Charcoal for Inline Fan, 6-Inch, Pre-filter Included, Reversible Flange https://www.amazon.com/dp/B008NYF8S4/ref=cm_sw_r_cp_api_fPozzbEXNQYCV

u/DocBrownMusic · 2 pointsr/BuyItForLife

Given that there's no such thing as a BIFL filtration system of any kind, the DIY recommendations here are rather reasonable. I quite like the furnace filter + box fan suggestion.

If you want something a little more robust, look into getting a carbon filter and a fan to go with it. I think the usual recommendation for carbon filters is for 24/7 use they need replaced every year or two. Here's one on amazon that you could use with a 6 inch fan which would add pretty good circulation for a large room: http://www.amazon.com/iPower-GLFILT6M-Control-Australia-Charcoal/dp/B008NYF8S4/ref=sr_1_2?ie=UTF8&qid=1396198801&sr=8-2&keywords=carbon+filter

This one comes with a fan: http://www.amazon.com/VenTech-IF6CF620-Inline-Virgin-Charcoal/dp/B0052ZPMAG/ref=sr_1_5?ie=UTF8&qid=1396198801&sr=8-5&keywords=carbon+filter

u/user865865 · 1 pointr/microgrowery

This is still a work in progress

Details:

Essential shoping list (to me)

-[6" fan and carbon filter]
(https://www.amazon.com/gp/product/B008NYF8S4/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1) works great, no smell, plenty of airflow, relatively loud at 100%, virtually silent when turned down to below 30% with some sound absorbing foam around the intake and fan. 4" would have worked for my small setup. I'm pushing through the filter which is outside my grow area with no problems. Don't forget some ducting and real duct tape. Clamps aren't really needed at these speeds and pressures if you have good tape, but they won't hurt.

-[Speed controller for fan.] (https://www.amazon.com/gp/product/B006NGI2RS/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1) This was definitely overkill, I just didn't trust cheaper voltage regulators, plus I can and have used it for other things. Pretty well made, works great.

-[pH meter.] (https://www.amazon.com/gp/product/B00CMFVXMA/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1) I didn't want to cheap out on this since pH is so important. Meter works great. Only note is you probably want to get some extra storage solution, it only comes with a little, and after a few months you'll run out.

-Light was a Viparspectra 300 (130 actual watts). Worked well, had good growth. I added more light later but for my small space that would have probably given me decent yields.

-[This timer for lights] (https://www.amazon.com/gp/product/B01MYOD58S/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1) was super easy to program and hasn't failed. It has a bright blue LED indicating if the timer is sending power to the lights which is nice, but I had to tape over it because it was so bright. Also, the timer gets a little warm which makes me a little uneasy since I only have ~250 watts going through it.

-General Hydroponics FloraGrow, FloraMicro, FloraBloom, CaliMagic. I also got Fox Farms Big Bloom part way through flower but don't have any way to know its actual benefits so it's not an essential.

-Coco for growing medium. Most people add perlite, I didn't.

-7 gal smart pot

-Plastic storage container with a kitchen cooling rack to sit the pot into and onto and allow drainage without making a mess. Cooling rack allows for 1/2" of water to accumulate before the pot is sitting in it.

-[adjustable hangers for lights.] (https://www.amazon.com/gp/product/B0098R0600/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1) Work great, easy to use



Set up and process

  • In a closet that's 1.8' x 1.8' x 6'

  • Temperatures between 72 F and 80 F. When I measure temp at the bottom of my canopy it's consistently about 5 degrees F below the temp at the top near my fan outlet. I have to use A/C in the room to keep it from moving up to 80 or a bit higher.

  • Humidity between 40% and 60%

  • Coco with about 30% peat moss which included time release nutrients. I didn't want the added nutes and tried running water through it for a few hours to clear it out, but I highly doubt that did anything. I wish I had waited a few days to ship pure peat moss so I could know exactly what nutrients were going into the plant. I picked peat moss because I wanted my pot to hold more water. I'm not sure if this was a good thing or not.

  • 7 gallon smart pot, only ~5.5 gal full though. I'm glad I went with the bigger pot since my plant is so tall and top heavy now. I have read that if you want to go bigger for the pot it's better to go deeper than wider because of the root structure, but I don't know.

  • I sprouted the seed using the paper towel method. Took a few days. Next time I'll probably use the water in a shot glass method.

  • I put the sprouted seed right into the 7 gal smart pot which probably wasn't a great idea. I also watered the entire pot for the first couple weeks which probably was bad. I should have started in a small container and transplant, or at least only water a small area around the seedling at first.

  • I put a bag seed in the same pot and sprouted it because I was dumb and bored. It sprouted and actually got to about 2.5 weeks old before I pulled the trigger and dug it up and transplanted it into it's own 5 gal smart pot. It wasn't happy for a few days because I know I damaged the roots in order to try to avoid the roots of the main plant. I let it grow in the new pot until about 4 weeks then I ran out of room in my closet and trashed the entire plant. Terrible idea all around.

  • Viparspectra 300 initially, then around day 50 of veg I added ~100 watts of CFL. At 40 days after the 12/12 flip I added a galaxy hydro 300 and took out the CFLs (we'll see if that was a good idea...)

  • Veg for 60 days after sprouting. Good idea if you have the vertical space and time. Veg took a long time because I waited too long and the first time I topped I took off like 3 or 4 sets of growth tips, it was like a whole mini plant. I don't know if waiting so long helped the plant develop more roots and a bigger stem which facilitated faster growing or if it was just wasted time. I'm going top it earlier next time though.

  • I topped it twice to get kind of a manifold. The height and size of the colas were not dependent on where it's branch started which makes me doubt the need of a symmetrical manifold, which this was not.

  • Defoliated a little around the 12/12 flip, a lot during about 20-30 days after flipping which left the plant with virtually no fan leaves with stems longer than 1". This was all great, next time I'll probably defoliate earlier.

  • I had to go out of town for 10 days just after the 12/12 flip. I raised up the lights, but not enough and one cola grew into a CFL and killed the top. I cut the top off and now the lower flowers are growing a bit bigger and taller than their partners on other colas, just no top. Also, I only got an automatic watering system set up the night before I left and it didn't water as much as I wanted, plus the pH drifted a lot while I was gone. I started with the pH low to try to mitigate it rising, which I expected. I was expecting the plant to really be struggling, but she looked great actually.











u/KushNBeer · 1 pointr/microgrowery

This fan

6" Inline Fan - 395 CFM Exhaust Duct Fan, Built-in Speed Controller, ETL Listed, Pre-Wired 6 FT Grounded Cord - Great Use in Grow Tent with Carbon Filters, Light Fixtures, Intake. Fits 6 Inch Ducts. https://www.amazon.com/dp/B01L0D0UEQ/ref=cm_sw_r_cp_apa_i_5YNSCb9Y7EARS

With this filter

iPower 6" Inch Air Carbon Filter Odor Control with Australia Virgin Charcoal for Inline Fan, 420 CFM https://www.amazon.com/dp/B008NYF8S4/ref=cm_sw_r_cp_apa_i_6ZNSCbGZX32RJ


Just know that when you open the tent. Shits gonna smell ..

u/Arcticflux · 1 pointr/Advice

-i use a BreatheRight by Allen for my allergies. It’s expensive ($600-ish) but if you get the charcoal filter it’s crazy good. Will remove scented candle smells and Bacon smells as well as the very marijuana smoke that I smoke inside my own apartment.

I haven’t received any complaints. It’s been 2 years.

The next thing would be to go one step higher and purpose an in-line fan filter and attach a huge 24” charcoal filter.

This option is actually WAYYYY more effective, but requires just a little bit of knowing how to put stuff together, and it’s slightly loud, but god damn, it totally cleans all smells and allergies.

This first link is for an in-line fan:


https://www.amazon.com/gp/aw/d/B07FPFVZTZ?pf_rd_p=731c2082-c3b6-4ec5-ba3b-337a0516607d&aaxitk=i0llSkJCSVXgMhex-F1n.Q&hsa_cr_id=3570293760101


Second link for the filter:

https://www.amazon.com/gp/aw/d/B008NYF8S4/ref=psdcmw_5446824011_t1_B07FPFVZTZ


Third link is for the Allen Breathe Right:

https://www.amazon.com/Alen-Customizable-Purifier-HEPA-Pure-Allergies/dp/B00APO426E/ref=mp_s_a_1_3?keywords=allen+breath&qid=1574290745&sr=8-3


The Allen is more aesthetically pleasing and is a complete unit that requires zero installation. Simply plug and play. This model is for 1100sqft. If you get this, get the charcoal filter. They have lots of filters.


The in-line fan and filter option will be like 10x more powerful and way more affordable than the Allen, but unpleasant to look at and is louder.

u/LazyGrower · 1 pointr/microgrowery

I was typing up my list of shit for my second grow. Lets see if I got my Reddit Formatting Correct. :)

The Details

Seeds

u/rdrunner_74 · 1 pointr/microgrowery

Why do you want to inline it?

And if you want to inline it, why not buy a regular filter and put it in a box and be done with it? For 2 tents you can get away with a fairly cheap filter for below 50$

Take this random one of Amazon...

https://www.amazon.com/iPower-Charcoal-Prefilter-Included-Reversible/dp/B008NYF8S4/ref=sr_1_4?s=lawn-garden&ie=UTF8&qid=1503753117&sr=1-4&keywords=carbon+filter

It even has screws so you can replace the coal if it gets old

You can just blow the air out of the filter

u/absentwonder · 1 pointr/microgrowery

Here is how I do it. Tent on right gets first air ( the coldest and driest as it's for flowering ) air moves to second tent ( the air is warmer and more humid now, ideal for vegging flowers),the air moves into the dry tent,which usually has it's own dehumidifier. Finally exhausting thru a carbon filter back into the room.

https://imgur.com/a/IkN2T9W

I hope this inspires ideas. It wont smell like cannabis in the exhaust air until like 2 weeks into floweing, from that point it progressively gets WAY stronger. I highly advise a carbon filter if you want stealth. I found this to work amazing ( iPower GLFILT6M 6 Inch Air Carbon Filter Odor Control Scrubber with Australia Virgin Charcoal for Inline Fan, Reversible Flange, Prefilter Included https://www.amazon.com/dp/B008NYF8S4/ref=cm_sw_r_cp_apa_i_J3bWDbSH6F9XR )

hope this all helps you 😎

u/Barbarellababe420 · 1 pointr/microgrowery

Yea some filters are just poor quality especially the small ones. I run this filter and it's worked great. http://www.amazon.com/iPower-GLFILT6M-Australia-Pre-filter-Reversible/dp/B008NYF8S4 it's also able to be flipped.

u/fregrowli · 1 pointr/microgrowery

What size fan (cfm)? What size ducting? I used this carbon filter in my 2x4x5 tent with a 6" 400 cfm inline fan. Worked great.