Reddit mentions of RCBS 09452 Universal Case Loading Block

He needs, yes. The Lee Challenger kit is around $99 on Amazon, and that has everything he'll need to get started except for: Bullets, Primers, Powder and Brass and DIES for 7.62x54r (another $30-$40)

Now, he'll want a digital scale, a case trimmer, and a tumbler to get his brass clean and pretty. That all can be added on, and most likely, be purchased in addition to the press kit for about $200.

Here's a list of things he'll want:

Lee Challenger Reloading Kit
https://www.amazon.com/gp/aw/d/B003ISVWC6/ref=yo_ii_img?ie=UTF8&psc=1

Hornady Reloading Manual (So he doesn’t blow himself up)
https://www.amazon.com/gp/aw/d/B01MAUZ71V/ref=yo_ii_img?ie=UTF8&psc=1

Calipers (So he doesn’t blow his gun up)
https://www.amazon.com/gp/aw/d/B000GSLKIW/ref=yo_ii_img?ie=UTF8&psc=1

7.62x54r Reloading Dies
https://www.amazon.com/Lee-Precision-7-62X54R-Pacesetter-Dies/dp/B00162UGUK/ref=sr_1_1?ie=UTF8&qid=1511562718&sr=8-1&keywords=7.62x54r+dies

Frankford Arsenal Quick-n-EZ Case Tumbler (To make clean-shiny brass)
https://www.amazon.com/gp/aw/d/B001MYGLJC/ref=yo_ii_img?ie=UTF8&psc=1

Case Tumbling Media
https://www.amazon.com/gp/aw/d/B000OQRGF2/ref=yo_ii_img?ie=UTF8&psc=1

RCBS Universal Case Loading Block
https://www.amazon.com/gp/aw/d/B0013RA5DQ/ref=yo_ii_img?ie=UTF8&psc=1

Hornady One-Shot Case Lube https://www.amazon.com/gp/aw/d/B0001NA29U/ref=yo_ii_img?ie=UTF8&psc=1

Guardians of the Galaxy Soundtrack (Because listening to good music scientifically makes better bullets)
https://www.amazon.com/gp/aw/d/B00LICGSFU/ref=yo_ii_img?ie=UTF8

Frankford Arsenal powder trickler. Compact, nice heavy base for stability, even flow. I also have an RCBS trickler and hate it. It's not as stable and the dispensing arm thingy is a weird two piece design that never seem to flow well for me.
GemPro 250 digital scale. Do not waste your money on cheaper options. I don't have experience with the chargemaster type of scale. I like to do things manually.
Redding Imperial Sizing Die Wax. Best stuff there is. Works amazingly well. I also keep a lanolin/alcohol spray lube around for doing large batch work, but Imperial Sizing Wax does a better job.
Hornady Bullet Comparator set. You don't mention what cartridges you're reloading. THIS KIT DOES NOT INCLUDE 6.5mm. There's a 14 insert kit that includes more, or you can buy just the few inserts you need.
Frankford Arsenal bullet puller. I buy what's cheap. These don't last forever. All the hammering eventually cracks the plastic. I've tried several brands and they all break eventually. I usually keep two on hand.


So that covers what you already know you need. Here are some more recommendations.

Hornady 9th Edition. I use this more than all my other manuals combined. I shoot a lot of Hornady bullets, though. If you already have a favorite bullet brand, you should buy that brand's manual.

Lyman Shooters Check Weights. I use these every single time I reload. I like knowing that my scale isn't lying to me. Digital scales can be finicky sometimes! These are worth every penny.

Hornady Headspace Comparator set. This is a lot like the bullet comparator set, except that it measure to the shoulder of the case instead of the ogive of the bullet. If you're planning on monitoring the amount you're bumping your shoulders during resizing, this is what you need.

Lyman Case Prep Multi-Tool. The chamfer tool that came with your kit will do the job, but this Lyman multi tool is my preferred method. It also comes with primer pocket scrapers that will be useful, and primer pocket reamers you should throw away and never use.

RCBS Uniflow Powder Baffle. This will help your uniflow powder measure throw more consistent charges.

RCBS Advanced Powder Measure Stand. If you're going to do a permanent installation of your powder measure on your bench, you will want this stand. Its price is absurd, but it's a great stand.

RCBS Universal case loading block. Your kit came with one, but you need at least one more.

What is your plan for cleaning brass? Wet tumbling with steel pins is the way to go. I have the Frankford Arsenal unit. It's huge and noisy. If I had it to do over I would purchase the dual drum tumbler from Harbor Freight and buy steel pins from Amazon.

Redding dies don't come with shellholders. Did you remember to get one?

What is your plan for case trimming? You don't mention what you're reloading. The cheapest option, which is actually my preferred method, is the Lee case length gauge and shellholders with their cutter and lock studs.

There are some additional case prep tools, but they would depend on what you're doing. If you are dealing with brass that has military crimps, you'll need tools to deal with that. There are primer pocket brushes, primer pocket uniformers, flash hole deburring tools, and a million other little things.

That's all that's coming to mind right now. I'm sure I missed some stuff.

Pretty cool. I likes.
For anyone out there that isn't as handy with a drill, a great container for holding these size flavoring bottles is a universal ammo reloading block. I had the below one just laying around and the bottles fit like a charm. Can hold 50 bottles which is more than enough for me.

http://www.amazon.com/RCBS-Universal-Case-Loading-Block/dp/B0013RA5DQ/ref=sr_1_2/184-2736175-8177942?ie=UTF8&qid=1398370959&sr=8-2&keywords=reloading+block

Definitely not as cool or flexible as OP's. But for the small bottles it's perfect.