#1,852 in Health & Personal Care
Reddit mentions of Savogran 10501 Wood Bleach, 12 oz,Black
Sentiment score: 2
Reddit mentions: 3
We found 3 Reddit mentions of Savogran 10501 Wood Bleach, 12 oz,Black. Here are the top ones.
Buying options
View on Amazon.comor
Contains oxalic acid which when mixed with hot waterEffectively bleaches unfinished or stripped wood quickly & easilyConcentrate mixes with water
Specs:
Height | 4 Inches |
Length | 4 Inches |
Number of items | 1 |
Size | 12 oz |
Weight | 0.75 Pounds |
Width | 4 Inches |
Or if you don't have like, thousands of dollars to spend cool yet frivolous purchases, you can just get [a tub of oxalic acid](Savogran 10501 Wood Bleach, 12 oz https://www.amazon.com/dp/B000VBGH82/ref=cm_sw_r_cp_apa_PbXkzbD3JRQ6W) for less than $10 on Amazon.
Mix in water and soak the item overnight; rust is gone.
From a simplicity point of view, I definitely think oil is the way to go. You'll see a 3 part cleaner, brightener and oil kit. It's a great idea but I think diluted oxalic acid works way better. Try this with this scrubber. Scrub (while using gloves) with the oxalic acid and the stainless steel scrubber being careful not to dig into the grain. Rinse it with clean water a couple times and let it dry. This brings the original color out of the teak. Then, just brush on a couple coats of oil. It's way less fiddly than varnish. Just wipe up any mess. You'll need to oil every other month or so to keep that nice warm color but I can literally do my deck hand rails and the companionway hatch in less than 15 minutes. It's very easy.
Thanks for all your advice! I’ve written out all details on the project I can think of with my final proposed design. I want to be extra careful since this uses mains voltage. I think I’ve mitigated my risks but would love your review and thoughts on the final design with the whole picture in mind. I’m also going to create a new post in this sub so feel free to reply there instead.
Project Overview
I’m building an oxalic acid vaporizer to treat my beehives for mite infestations on a semi-annual basis. Oxalic acid comes in a powder form and sublimates at 315F, degrading into unwanted gas products at 372F. 1-2g of acid are applied at a time and must be done so away from the person as fumes are toxic. The vaporizer will be used 1-2 times per year by myself only.
Key Requirements
Design & BoM
The vaporizer will consist of a heating element with a small copper reservoir on the end of an aluminum broom stick. It will plug into an extension cord and have an inline illuminated switch to turn on/off as well as an in-line thermostat to keep the element in the correct temp range. All elements will be grounded and well secured and insulated to avoid shock. The rough placement and wiring diagram can be seen here and takes after this one. The BoM is below
Risks/Questions
That’s it. Anything problematic or overlooked? Any better ways you can think of?