Reddit mentions of Stanley 90-949 10-Inch MaxSteel Adjustable Wrench

You sya you don't have the tools to make the mash tun and brew pot. I assemlbe my mash tun, HLT, and brew pot with two 10inch adjustable wrenches, a standard dewalt drill, a carbonate cutting bit, a stepped cutting bit, and some cutting oil. If you have the drill everything else would cost around 50 bucks, then you also gain tools with your equipment. The hardest part is cutting holes in the pot for a thermometer.

Either way to make the Mashtun and MTL you would only need 2 10 inch adjustable wrenches.

Up to you, but here is some all grain kits you could look at:

http://www.austinhomebrew.com/10-Gallon-Igloo-Cooler-Mash-Tun-With-False-Bottom-AND-Hot-Liquor-Tank_p_6699.html

https://www.amazon.com/Gallon-Cooler-Stainless-Steel-Screen/dp/B013KJKAC0/ref=sr_1_9?ie=UTF8&qid=1486068034&sr=8-9&keywords=10+gallon+mash+tun

You can make a 10 gallon mash tun for under 100 dollars:

10 Gallon cooler (~$50)
https://www.amazon.com/Igloo-Gallon-Beverage-dispenser-Dispenser/dp/B000F6SHTK/ref=sr_1_1?ie=UTF8&qid=1486068151&sr=8-1&keywords=10+gallon+cooler

Ball Valve(~$15)
https://www.amazon.com/Eagle-Brewing-Wl301-Stainless-Weldless/dp/B00OC8DXPA/ref=sr_1_sc_2?ie=UTF8&qid=1486068175&sr=8-2-spell&keywords=wedless+ball+valve

Screen (~$8)
https://www.amazon.com/Stainless-Steel-Bazooka-Screen-Fitting/dp/B003ISY2DC/ref=pd_sim_468_4?_encoding=UTF8&pd_rd_i=B003ISY2DC&pd_rd_r=45GNPGH763R20241728C&pd_rd_w=MCZcu&pd_rd_wg=n4Wsv&psc=1&refRID=45GNPGH763R20241728C

1/2 female npt fitting(~$5)
https://www.amazon.com/Stainless-Steel-Fitting-Coupling-Female/dp/B003GSKXUU/ref=pd_sim_328_6?_encoding=UTF8&pd_rd_i=B003GSKXUU&pd_rd_r=SMJAVJR6CYZ7P9ZBQBQQ&pd_rd_w=h6v7j&pd_rd_wg=eclPX&psc=1&refRID=SMJAVJR6CYZ7P9ZBQBQQ

Total: 78 dollars. You can buy 2 10 inches adjustable wrenches for 20 dollars (https://www.amazon.com/Stanley-90-949-10-Inch-MaxSteel-Adjustable/dp/B000NIDIXA/ref=sr_1_1?ie=UTF8&qid=1486068379&sr=8-1&keywords=10+inch+adjustable+wrench)

so even having to buy tools its still under 100 dollars to make the Mash tun. The hot liquor tank will be the same price minus the screen, npt fitting, and tools. I personally made mine even cheaper buy using a 5 gallon htl instead of a 10 gallon and that will drop the price 25 more dollars. There is 0 drilling involved you simply unscrew the old plastic tap and put the weld ball valve in its place, it took me less than 10 min to make my new HTL on Monday.

Also, and this is really important to why I say build yourself, any mash tun you buy is going to be put together the same way it just matters whether you put it together or someone else does, either way the quality will be identical.

If you need a sparge arm for fly sparge you can make that out of pvc pipe: https://www.youtube.com/watch?v=Q-jgmgbwvg4

My two cents, even though you don't believe in you. I do, if you feel like saving money you can absolutely make all this stuff yourself and it doesn't require you be good at anything more than thinking like a logical person.