#11,815 in Industrial & Scientific
Reddit mentions of Tesa 51970 Tackified Acrylic Double Sided Filmic Tape, 55 yard Length, 1" Width, 8 mil Thick, Transparent (Pack of 1)
Sentiment score: -1
Reddit mentions: 1
We found 1 Reddit mentions of Tesa 51970 Tackified Acrylic Double Sided Filmic Tape, 55 yard Length, 1" Width, 8 mil Thick, Transparent (Pack of 1). Here are the top ones.
or
Excellent combination of high tack and adhesionSecure bonding even on critical materials such as PP and PE and rough surfacesGood temperature resistance and outdoor suitabilitySuitable for mounting and bonding applications in the appliance industryAvailable in transparent color
Specs:
| Color | Translucent |
| Number of items | 1 |
Nice choice to start. I wouldn't have offered information about the lighting without being willing to share.
I found this LED srtip on amazon. The LED strip came with the controller box, the remote and the correct size barrel adaper. It is a 12V set up. But it didn't come with an actual power adapter so I found this one. Unfortunately, the adhesive that is on the back of the LED strip loses it grip to the strip. I removed the adhesive by hand an I used this tape, which is on the expensive side but I worked with it at an old job and it will not fail. You will also need a soldering iron, solder, and some 22 AWG wire.
Before I replaced the adhesive, I had measured out the strip into the lengths that I need and cut along one of these lines. You will need to remove rubber coating that is over the pads. I used wires to bridge the sections of the strip that needed to be spaced out. I also had the wire measured out to bridge the levels on the shelf also. I located the strip right against the front face of the shelves to hide it from view as you can see from the last image.
If there is anything else that you have a question about let me know. I will admit that it was a time consuming and a bit of a pain in the ass. But it worked out well.