Reddit mentions: The best teapot warmers
We found 16 Reddit comments discussing the best teapot warmers. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 10 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Happy Sales HSTW3, Cast Iron Teapot Warmer Med 4.5" D Black
- Light up a Tealight Candle and Keep Your Tea warm by this fabulous teapot warmer
- Dimensions: 4.75" W x 2.7.5" H
- Heavy Cast Iron Construction
- Happy Sales HSTW3, Cast Iron Teapot Warmer Med 4.5 "D Black
Features:
Specs:
Color | Black |
Height | 3 Inches |
Length | 5 Inches |
Number of items | 1 |
Size | One Size |
Weight | 0.03 Pounds |
Width | 5 Inches |
2. M.V. Trading T-7036 Cast Iron Teapot Warmer, 5¾-Inch
Tetsubin Cast Iron Teapot WarmerDimensions: 5.75" W x 3?" H.Heavy Cast Iron ConstructionUse with 1 Tea light (not Included)Perefet Setting For Teapot SetMade in China
Specs:
Color | 5¾-inch |
Height | 3.7 Inches |
Length | 6.42 Inches |
Weight | 2.65 Pounds |
Width | 6.42 Inches |
3. Happy Sales Glass Teapot Warmer Heat Proof Glass, Clear
Borosilicate Glass heatproof mouth blown teapot warmer by Happy Sales.Fits most teapots (and dishes) up to 1.2 liter (40 fl. oz)with a base of up to 4.4" in diameter.Dimension - 5"D x 3.25"HInclude a tea-lite candle.Simply insert and light up a tea candle to keep your pot just the right temperature
Specs:
Color | Clear |
Height | 3 Inches |
Length | 5 Inches |
Number of items | 1 |
Weight | 0.43 Pounds |
Width | 5 Inches |
4. Nanbu Tekki Cast Iron Flat Sake Warmer Arare 0.5l 13-001 by Iwachu
Specifications of the product 110mm height 160 × depth 190 × width: size Weight: 1.25kg Material Material: cast iron, wrought iron Country of origin: Japan Inner surface enamel finish Capacity: 0.5L Diameter: 63mm
Specs:
Color | Dark Tea |
Height | 4.330708657 Inches |
Length | 6.299212592 Inches |
Size | 0.5L |
Weight | 2.645547144 Pounds |
Width | 4.330708657 Inches |
5. Old Dutch International 6" Matte Black Teapot cast Iron tetsubin Warmer 5.7"
Keeps cast iron teapots heated for several hours.Removable top portion doubles as a trivet.Can be used for ceramic teapots as well.Matte Black finish.Individually hand cast
Specs:
Color | Matte Black |
Height | 3 Inches |
Length | 5.75 Inches |
Number of items | 1 |
Size | 5.7" |
Weight | 2.33 Pounds |
Width | 5.75 Inches |
6. Amsterdam Ceramic Teapot Warmer - Black
- Beautifully glazed ceramic in vivid color.
- Dishwasher & Microwave Safe.
- Candle and teapot not included.
Features:
Specs:
Color | Black |
Height | 9 Inches |
Length | 7.2 Inches |
Weight | 0.59 Pounds |
Width | 4.7 Inches |
7. GROSCHE Nairobi Premium Teapot Warmer with tea lite candle. For glass teapot and other heatproof dish warming use.
- Premium quality warmer for teapots and tea kettles. Includes a tealight candle.
- Large sized, sturdy warmer will work with mid to larger sized teapots like GROSCHE Munich, GROSCHE VIENNA, etc.
- Perfect for mid sized to smaller sized teapots as well. Dimensions 5.75
- High quality construction and beautiful bronze finish will give your next tea making experience a truly luxurious feel
Features:
Specs:
Color | Nairobi |
Height | 2.75 Inches |
Length | 5.75 Inches |
Number of items | 1 |
Weight | 0.65 Pounds |
Width | 5.75 Inches |
8. COSORI Coffee Mug Warmer, Premium 24Watt Stainless Steel, Best Gift Idea, Office/Home Use Electric Cup Beverage Plate, Water,Cocoa,Milk
Perfect Gift Choice: Keep the beverages warm all day, making it a great gift for mom on Mother's day to show you careAdjust any Temperature You Desire: Designed in California. Just turn it on and touch up/down button to set the temperature, making its hot plate warm up to any desired temperature fro...
Specs:
Color | Silver |
Height | 0.65 Inches |
Length | 5.4 Inches |
Number of items | 1 |
Release date | August 2017 |
Size | 5.4 x 4.3 x 0.65 inches |
Weight | 0.48 Pounds |
Width | 4.3 Inches |
9. SAHARA Teapot Warmer by GROSCHE; Heat proof High Quality Glass,In original Grosche branded box
Borosilicate Glass heatproof mouth blown teapot warmerfits most teapots (and dishes) upto 1.2 litre (40 fl. oz)with a base of upto 4.4" in diameterborosilicate heat proof glass warecomes with a tea-lite candle to keep tea warm. keeps tea warm for hours.Pls note this fits GLASGOW, MERLIN, and STOCKHO...
Specs:
Color | Glass |
Height | 2.76 Inches |
Length | 4.92 Inches |
Number of items | 1 |
Weight | 0.33 Pounds |
Width | 4.92 Inches |
10. Desktop heated coffee/tea mug warmer - candle & wax warmer (1, 1 Cup) (D132) (MW1100)
Non-skid feet on/off switch and power indicator5" dia. x 1" H with 40" ETL- listed cord;
Specs:
Color | White |
Height | 1 Inches |
Length | 5 Inches |
Size | one size fits all |
Weight | 28 Pounds |
Width | 5 Inches |
🎓 Reddit experts on teapot warmers
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where teapot warmers are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
For brand new crystals I do a day/night cycle during a bright moon outdoors, the salt bath, and a sage "bomb". Hey, it might be overkill, I don't know where they've been! The only exception to this rule is when I buy from a certain seller on etsy who pre-cleans the stones before she sends them, in the natural spring water on her property. They just get saged. Everything gets saged at all times. I'm not sure if I am paranoid or I just want excuses to burn sage and am attempting to justify my addiction.
I don't really go in for dyed crystals, so sunlight is not much of a problem (if you have dyed crystals, be careful because it could fade them), but when I do, I put them in white butcher trays because white is nice and reflective, and you can see the colors nicely behind them. When I am not using them for cleansing crystals, they're used for watercolor painting, so I don't specifically have a bunch of trays just for crystals. I just put them on my back deck which gets full sun and leave them out there from noon-noon.
For the sage: I have a tea warmer (this one actually ) that I put sage on charcoal incense every time I need them. So at least a handful once a week get this treatment. If I have to do larger amounts, or really want to make sure, I put a plastic tub (a very large one that is at least 1 foot away from the incense at all times) over top of the mini altar that I do this on, but I think this is specific to the table that I have and I would not recommend it to others (my table can only be described as an antique TV tray from before TVs existed that has a tempered chicken wire glass surface and air slots all around the side of it, so the incense doesn't go out when I place a giant plastic tub over it. It's pretty weird.) I can really get the smoke concentrated in there though, touching all surfaces.
For the salt bath when they have skin oils (except water soluble things like fluorite, selenite, etc). Usually once a month for things I tend to pick up a lot. I use the same butcher trays as I do outside.
I've worked with gelatin (Also 300 bloom Type A)! I've mostly worked with transglutaminase crosslinked gelatin though, because normal gelatin liquefies at 37C and I used the gelatin for mammalian cell culture.
To make my gelatin solutions (without transglutaminase) I dissolved the gelatin at 65C in PBS, but water/cell culture media should work fine. I noticed that I had to keep the solvent quite hot for the gelatin to dissolve well. My lab notebook notes say that going below 65C made the gelatin dissolve a lot slower, but YMMV.
I've gone up to 25% w/v gelatin. However, the max I'd be comfortable working with is 15% w/v. Even at 20% the gelatin is quite viscous and hard to work with, it gels fairly quickly once you take it out from a 37C environment into room temperature. (My room can get a bit cold though) Note: Higher w/v = faster gel time and more solid gel (i.e higher compressive modulus)
The actual w/v you should use depends on your application I guess. Do you want to set it on the fabric and not have any go through? If so maybe a higher w/v might be better (15-20%?). You could also just let whatever w/v gelatin solution you have cool and pour it right before it gets cold enough to gel though.
With regards to your last point: Well you said that the technique involves setting gelatin on the fabric... so I'm guessing you should let the gelatin set first?
Tip: I bought a cheap coffee cup warmer and set it to 37-40C to keep my gelatin from solidifying in the cell culture hood, until I needed it to.
I think it retains heat pretty well if you keep the lid on. It pours very nicely, you'll never miss or spill. And the mesh infuser is huge, it's really easy to pick up and let the tea drain so you don't over seep the tea.
Edit: You can also use this tea light warmer to keep the tea hot if you're going to take a few hours to drink the tea. It's only $10, and the teapot is $15 so you'd be spending a lot less than what you'd originally planned even with this add-on.
Tea cups like this teaology one ($3.95), or this series of Turkish cups--(or this alternative set) all would match the "all glass" look nicely.
hmm.. the photo's pretty dark and I cannot see the features very well. Maybe look for the key words Nambu (南部), Tetsubin (鉄瓶), and HiraArare (平あられ)? Not quite the same but those can be similar.
http://www.amazon.co.jp/dp/B001UJCX7S
http://www.nanbutetsu.jp/SHOP/12041.html
http://www.tetubinn.com/formmail2%E3%80%80%E3%80%8011400/form1.html
edit: amazon jp link
I like metal for the exact opposite reason. I put my cast iron teapot on a teapot warmer (like this one) and it stays warm until I am finished. I'm sipping hot tea all the way to the end of the pot!
After a bit of searching, I found this which is a similar device although the form is very different.
And you've got cast iron teapot warmers like this
After I asked you about it I did a reverse image search and found it on amazon, that exact one to. Here it is, It is not a bad price, and you can get a Trivet, and a tea pot warmer for $67.12 USD, which in total is not bad for a nice tea set.
I am going to agree. Turn the OPs pic upside down (as said) then look at this one on amazon
I use a coffee mug warmer similar to this. Puts out plenty of heat for me (about 10W). Have also used a small crock pot on its lowest setting; that would crank out 30, which was overkill. I used these because they likely have built-in thermal cutoffs for safety. YMMV; my freezer is small and I live in northern Alabama, so it never gets very cold.
I do half pounds with a mini vice grip, and a tea cup warmer.
http://www.amazon.com/Desktop-heated-coffee-tea-warmer/dp/B0046DNT4Q
I use this teapot warmer, and kettle. I make my own candles to get the temperatures where I want them, depending on tea type.
https://www.amazon.com/gp/product/B00IMNRO3S/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
https://www.amazon.com/Bonavita-BV3825ST-1-Liter-Stovetop-Kettle/dp/B005YR0IBU/ref=sr_1_4?ie=UTF8&qid=1509732268&sr=8-4&keywords=bonavita+kettle
Yup, something like this
One has this same issue for tea and gong fu ceremonies.
You could get one of these
Or something like this
Or go old-school and get a cozy.
YO that’s crazy because I always make it w the single serve machine I have and forget, and I hate microwaving it so I found a mug warmer on amazon that I wanna get 😭😭
like this one