Reddit mentions: The best arc welding electrode holders
We found 5 Reddit comments discussing the best arc welding electrode holders. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 4 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. 4 Pieces of CMS Magneitcs Magnetic Welding Magnets 50 LBS Holding Power Welding Magnet | Welding Accessories | Magnetic Welding Holder (50 LB Welding Magnet)
- Magnetic Welding Holder, TIG Welding Tool for Holding Up Metal Parts. Up to Maximum 50 LB Holding Power. Welding Clamp for All Welders
- Powerful Magnets in Compact Design Allow You to Hold a Whole Range of Items, Competitive Price and Fast Delivery. For all Kinds of Welding
- High Gloss Enamel End Plates Applicable for all Kinds of Welding, Gas Tungsten Arc Welding (TIG ), Gas Metal Arc Welding ( MIG ), Shielded Metal ArcWelding ( Stick ), Cored Arc Welding ( Flux ), Energy Beam Welding (EBW), Atomic Hydrogen Welding (AHW), Gas Tungsten-Arc Welding and Plasma Arc Welding
- These Tools can Also be Used for All kinds of Holdings, Alignments, Markings. Apply for all Magnetic Materials. Holds Material at 45, 90, and 135 Degrees for Easy Welding or Soldering
- Frees up Your Hands So You Can Concentrate on Your Work. Made under ISO 9001 Quality Systems and Money Back Guaranteed.
Features:
Specs:
Color | Red |
Size | 50 LB Welding Magnet |
2. Hobart 770028 Welding Holder Electrode 400 Amp - Screw Type
- Accepts rods up to 5/16"
- Electrodes burn within 1" from the head and can be bent to any angle and still be held secure.
- Item Package Dimension: 12.3" L x 4.5" W x 2.8" H
- Item Package Weight: 1.4 lb
Features:
Specs:
Height | 1.5 Inches |
Length | 11.9 Inches |
Number of items | 1 |
Size | 5 |
Weight | 1.15 Pounds |
Width | 4.2 Inches |
3. Magnetic Welding Holder - Arrow Shape For Multiple Angles - Holds Up To 50 Lbs For Soldering, Assembly, Welding, And Pipes Installation - By Katzco (75 lbs)
- ARROW SHAPE - The Arrow shape design of this allows you to work with different angles while welding pieces. Can be used for 45, 90, and 135 degree angles.
- MAGNETIC - This welding piece holder is magnetic so it can hold work pieces at multiple angles while leaving your hands free to work more efficiently.
- DURABLE - These welding holders are made of a heavy duty construction that can hold up to 50 lbs of material without any wear whatsoever and will last through years of use.
- USE FOR A VARIETY OF APPLICATIONS - Magnetic Arrow Holders can be used for more than welding. Use them in Welding, Soldering, Assembly, Marking-off, Pipe Installation, Floater and in Hanging Application.
- CONVENIENT- compact design of magnetic holders make them super convenient and portable to bring around in any work environment.
Features:
Specs:
Number of items | 1 |
Size | 75 lbs |
4. Hakko Omnivise PCB Holder (C1390C)
- Omnivise Board Holder for 852 Rework System and C1392B Rework Fixture
- Holds boards easily, safely and securely
- Unique design allows 360 degree use
Features:
Specs:
Color | Silver |
Height | 4 Inches |
Length | 4.8 Inches |
Number of items | 1 |
Release date | September 2017 |
Weight | 3 Pounds |
Width | 4.1 Inches |
🎓 Reddit experts on arc welding electrode holders
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where arc welding electrode holders are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
That'd be fine for practice, just cleaning up the area so the weld sticks better. You may also wish to eventually go get a cheap grinder (harbor frieght ones are junk, but fine enough to just tooling around and learning.) as well as some 90 degree magnets like these: https://www.amazon.com/CMS-Magneitcs-Magnetic-Welding-Holding/dp/B000UCWTXY so you can get the fit right before tacking, and having to do one handed tacks.
Also, your weld looks a bit cold, without much penetration, but that could be because of what you're welding on.
I like these better: https://smile.amazon.com/Hobart-770028-Welding-Holder-Electrode/dp/B0017Z1T98
And one of these.
http://www.amazon.com/Hakko-C1390C-Omnivise-PCB-Holder/dp/B00IX2H050/ref=sr_1_sc_1?ie=UTF8&qid=1457736502&sr=8-1-spell&keywords=omivice
Magnetic Welding Holder - Arrow Shape For Multiple Angles - Holds Up To 75 Lbs For Soldering, Assembly, Welding, And Pipes Installation - By Katzco https://www.amazon.com/dp/B01CRJLH8K/ref=cm_sw_r_cp_api_iZXRAbY8XG89Z