Reddit mentions: The best automatic irrigation drippers
We found 16 Reddit comments discussing the best automatic irrigation drippers. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 11 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Rain Bird PRF07530S Drip Irrigation In-Line 30 psi Pressure Regulating "Y" Filter, 3/4" Male Pipe Thread
- 3/4" Y filter unit combines filtration and 30 psi pressure regulation in one piece
- Reduces the number of components in system and speeds installation
- Protects and prevents clogging of downstream Drip irrigation components
- 200 mesh (75 micron) Stainless-steel filter pre-installed; cap unthreads for quick cleaning
- Works with all types and brands of 3/4" irrigation valves
- Robust body and cap constructed of glass-filled polypropylene for reliable long-life
- 3/4" x 3/4" male pipe thread; 150 psi pressure rating
Features:
Specs:
Color | Black |
Height | 5.5 Inches |
Length | 12.5 Inches |
Number of items | 1 |
Size | 30 PSI Pressure Regulating, 3/4" |
Width | 12.5 Inches |
2. General Hydroponics Waterfarm Plumbing Kit
Farm Kit - Hardware Kit for WaterFarm
Specs:
Weight | 0.4 Pounds |
3. Orbit 67101 Inline Multi-Stream Emitter 10 Count
- Enjoydeal Digital Kitchen Timer series can be operated in 4 separate power supplies, ranges from 240V AC to 12V DC, output format can be produced to be volt-free or voltaic-output
- The 12 volt LCD Programmable Timer is accurate to the minute, hour, days, designed with either 17 ON/OFF (event) per day. Rated control voltage: 12V DC/AC; Contact capacity : 16A(8)A, 250V AC
- Big Digits Loud Alarm and12v Timer Switch Provide 15 combination of daily programs which can lead great convenience to user upon choosing the required days in a week for operation the time
- Digital relay timer advanced pre-setting one week before, digital electronic timer switch with daily and weekly programs for Cooking Baking Sports Games Office
- 12v rRelay Switch Repeat programs with 17 on/off setting and manual override lithium battery power reserve when electric supply cut off
Features:
Specs:
Height | 5.5 Inches |
Length | 0.75 Inches |
Weight | 0.05 Pounds |
Width | 3.5 Inches |
4. UCLEVER 50pcs Adjustable Irrigation Drippers Drip Emitters with Barbed Connector for 4mm/7mm Tube, 360 Degree Water Flow Drip Irrigation System
Adjustable 360 Degree Full Circle Spray, Suitable for tube: Inner diameter 4mm, Outer diameter 7mm.Length 13.5cm/5.3", Spray distance from 0 to 20 inch. 50pcs Barbed Connector Included.Directs water exactly where you need it in a wide variety of planting areas Applies water similar to a spray head o...
Specs:
Weight | 0.44 Pounds |
5. Terracotta Plant Waterer - Perfect for Vacation Plant Watering
- GREAT FOR VACATIONS - Simply set and go!
- PERFECT GIFT for any plant lover. Make their gardening easier and their plants healthier.
- GROW HEALTHIER PLANTS - Automation watering prevents under and overwatering, promoting healthier roots. Plus, no overflow means you won't lose any soil or nutrients.
- SET OF 4 ECO-FRIENDLY plant waterers. Recycle any long neck bottle. EASY-TO-USE - Just fill a bottle and insert the Terracotta Plant Waterer into the soil. Transforms any planter into a self watering planter.
- LIFETIME REPLACEMENT WARRANTY - Punchau stands behind all of its products 100%. If anything ever goes wrong with this, we will replace it with a new item.
Features:
Specs:
Size | Pack of 4 |
6. Hestya Watering Stakes Automatic Watering System, 10 Pack Plant Self Drip Irrigation Slow Release for Indoor or Outdoor Houseplants
- How to use: as the soil dries, the ceramic cone delivers water gradually into the surrounding earth; Thereby create a vacuum within the cone which draws water from the nearby container of water; Once the soil is moistened enough, the watering stake will cease flowing water; Note: close cap with full water in stakes, formation of a vacuum in stakes
- Useful tools: the self watering probes are simple and effective ways to water your plants when you are on vacation, business trip or forgetting to water them
- Application: the 10 pack watering stakes are suitable for most automatic garden watering devices; They are good for seeding, planting without pollution; And they will slow to release water into the pot as the plants need
- Measurement: connect tube is 78 cm/ 30.7 inches in length, the root get water directly by itself to achieve water drip irrigation
- Kindly reminder: the watering stakes are suitable for watering any indoor plant; Please keep the sink and flower pot at the same level; And the sink is at higher level, which will accelerate the process of drip irrigation
Features:
Specs:
Color | as pictures shown |
Height | 1.2992125971 Inches |
Length | 8.661417314 Inches |
Width | 6.4960629855 Inches |
7. DIG 308B 180 Degree 0-30 GPH Adjustable Drip Jet Sprayer (2 Pack)
- Available in 90 degree, 180 degree, and 360 degree diameter for individual plants or closely spaced plantings
- Recommended for flowerbeds, groundcovers, shrubs, or for areas where low flow overhead irrigation is desired
- Adjustable knob allows control of flow to reduce or increase the wetting area
- Available as a complete assembly on 13" spike with 12" pe riser and barb or with 10/32 thread
- Efficient and reliable method to apply water
Features:
Specs:
Color | Blacks |
Height | 1 Inches |
Length | 1 Inches |
Weight | 0.02 Pounds |
Width | 1 Inches |
8. Dzzzzc Automatic Potted Waterers Stakes, 8 Pack Plant Self Watering Spikes Devices, Waterer Plants System When Vacation Away for Outdoor & Indoor Use
MOST EASY USE: Self Plant Watering Device for Your House plant. A simple and effective way to water your plants when you are away weeks or have no time to take care of your plants.DEVICE PRINCIPLE: As the soil dries, the ceramic cone delivers water gradually into the surrounding earth - thereby crea...
9. Rain Bird MSF10PKSX Drip Irrigation Threaded Close Coverage Fan Spray Nozzle, 360° Full Circle Pattern, 4' Spray Distance, 10-Pack
Economical fan spray jet nozzle provides 360° full circle pattern at a 4' spray distanceDistributes a continuous fan-shaped water spray jetIdeal for any closely spaced plants in areas such as: gardens, mass plantings, landscapes etc.Designed for riser mounting to elevate water spray above foliageWi...
Specs:
Height | 1 inches |
Length | 0.25 inches |
Number of items | 10 |
Size | Full-Circle 360° Pattern |
Width | 0.5 inches |
10. Raindrip PC8010B 2 GPH Pressure Compensating Drippers, 10 Per Bag
Maintains a constant flow rate even on hillsides or long circuitsCan be buried and "ported" up to surface with 1/4" tubingMade in United StatesBrand name: Raindrip
Specs:
Color | Black/Green |
Height | 7 Inches |
Length | 2 Inches |
Number of items | 1 |
Size | 10 Pack |
Weight | 0.04 Pounds |
Width | 4 Inches |
11. JUSHACHENGTA 8 Pack Automatic Plant Waterers, Plant Watering Devices, Automatic Slow Release Vacation Plant Waterer Slow Release for Outdoor & Indoor Use
- EASY INSTALL ON DROP HANDLEBARS: Attaching easily to your drop bars, this system helps you stay informed while keeping your eyes on the road. Simply open the cap to expose the mirror.
- 360 DEGREE VISIBILITY: Mirror offers 360 degrees of rotation for easy adjustment. Range of view is an incredible 100 meters. Fits drop handlebars sized 21-23 mm and compatible the left or right side.
- STAY FOCUSED ON THE ROAD AHEAD: No more looking over your shoulder. Instead, use CORKY to stay in optimal riding position, keep your eyes on the road ahead, and the targets on your cycling computer.
- PERFORMANCE DESIGN: Its sleek, aerodynamic design minimizes air resistance while open. When they’re not in use, close the lid to keep the mirrors safe. Perfect for competitive cyclists or commuters.
- QUALITY DESIGN AND MANUFACTURING: Conceptualized in France & manufactured in South Korea. Made with durable ABS plastic body, Polycarbonate (PC) glass mirror, and steel mounting secure installation.
Features:
🎓 Reddit experts on automatic irrigation drippers
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where automatic irrigation drippers are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Oh i was looking on my phone before. The retro-1800 model is a low flow sprayer head. Typically you see these in beds with drought resistant plants. These work fine but waste a little more water than drip tubing. This may be an easier way for you to lower your water out
Typically when someone says "drip irrigation" they mean tubes like this. Its the most efficient way to water the soil - there is much less wasted water. You just space the tubes as far apart as the emitters are spaced.
This tubing will work with the RCKIT. But it does not look like RCKIT includes a filter. The drip tubing gets clogged pretty easily so typically you put a filter like this inline after the valve and a flush valve that periodically flushes the drip tube of any sediment buildup. Both of thes would be placed in a small box. Sediment buildup and drip tubes clogging can be a big deal if you are using non-potable water like well water. It's not nearly as big of an issue for systems using potable water.
The marine should hold (assuming it bonds to the plastics properly). Marine resins can take 7 days to fully cure. It's worth noting that there are some pretty extreme carcinogens in marine rated resins.
I'm not sure what hardware stores have in way of hydro-friendly gaskets, but you might be better off just buying the General Hydroponics Waterfarm kit. It's only $12 and you can pretty much guarantee it'll work if you drill the right hole size and just hook it up to new tubing of the same size (take tubing to a Home Depot, they should have tubing of the right size). If you decide at a later date you want a drip rig, you're already part way there.
I can post more pictures of the setup tomorrow if you want, basically since I live in an apartment building I use the water pressure from our reservoir that sits 7 floors above my apartment.
I have connected a timer to the wall that turns on a solenoid valve twice a day for 5 minutes.
The water comes out from under the sink on the balcony, goes to a 1/4" tubing that is then reduced to a 1/8" to fit the drip system.
I have just about enough water so that the water starts to drip form under the vases and since where I live is quite warm the plants usually like that.
I have set up the system 2 weeks ago so I still didn't had time to see if I should reduce or increase the water but this can be easily done by changing either the time the valve stays open or the amount of water that leaves the drip valve.
Here are the links for the stuff I used (similar):
Solenoid Valve
Timer
I like this model so you can connect the wires to the inside of the plug and keep you plug usefull.
Dripper I used these ones but I could not find then on amazon.
These look like might work aswell, and would solve one of my complaints about mine that is, when I need to change the amount of water I end up having to twist the water line witch messes up the direction of the rest of the line.
That's basically it, just pay attention to the diameter of the tubing and the voltages you use everything else should work just fine.
Super useful info, thanks!
So would i be right in saying i need:
I got to thinking... if you’re getting a lot of rust it sounds like you have galvanized pipes. If that’s the case, all new sprinklers com with a filter at the the nozzle. If you have pvc, this will work: https://www.amazon.com/Rain-Bird-PRF07530S-Irrigation-Regulating/dp/B006JZ51MC/ref=mp_s_a_1_3?keywords=drip+filter&qid=1565144267&s=gateway&sprefix=drip+filter&sr=8-3
This is 3/4” so if you have one inch you’ll have to get adapters. But still.... with pvc you can get a new sprinkler with a filter at the nozzle. That’ll be much easier and more cost effective whichever pipe you have.
I don't know I'd this will help at all, since mine has died, but...
Mine (indoors) wanted to be constantly moist. I put one of those [terracotta bottle plant waterers](Terracotta Plant Waterer - Perfect for Vacation Plant Watering https://www.amazon.com/dp/B0156S2OWC/ref=cm_sw_r_cp_apa_4yBSzbAQS4RWK) in it, and it thrived for a while. Then... I don't know what happened. It started turning yellow and dying back. Maybe it got root rot?
I currently have a Silver Falls that is acting like it's thirsty (dry leaves) though the soil is definitely moist. I don't know what to do either!
Edit: added link
This is a complet waterfarm kit, just need a res and grow chamber It's not very expensive but good stuff still.
Last year I used something similar to this and it worked great. I was gone for over a week.
https://www.amazon.com/Hestya-Watering-Automatic-Irrigation-Houseplants/dp/B07C4NMHPP
you could replace your emitters with "fan" spray type emitters - used in landscape watering. I think something like this (Amazon link) could work very well for your project.
I believe it's a plant waterer. You jab it into the soil. The pretty, glazed bit is above the surface and looks nice. The water seeps out from the unglazed bit to the roots.
It's kinda like these terra cotta ones, but fancier.
Omg mine almost died and at one point i almost wished it would so i could finally be free. Lol. Just keep trying different stuff. I found that it's really important to never let the soil dry. Which feels counterintuitive because my other plants do want to dry completely. The hydrostakes can help with that. But they're kinda hard to use, not gonna lie. I'll link the cheap ones i got on Amazon. but i wouldn't recommend them. I wish I'd spent a little extra and gotten the blumat brand, which seem to work more consistently. https://www.amazon.com/dp/B07FQR3Q97/ref=cm_sw_r_cp_apa_i_IOIYDbWWVGJ8M
I'm stoned so I decided to price out a DIY recirculating drip [single unit] for you with links!
$31.86 for a DIY recirculating drip bucket
If you don't have an Air Pump you're looking at $38.86.
Also, micro bubblers: https://www.amazon.com/dp/B0006VOQTY/ref=asc_df_B0006VOQTY5374692
And drippers: https://www.amazon.com/dp/B003B6JIQW
Raindrip small irrigation supplies are sold at many hardware stores.
Here's the other stuff
Spray heads:
https://www.amazon.com/Rain-Bird-MSF10PKSX-Irrigation-Threaded/dp/B06XSR8MMG/ref=sr_1_84?keywords=threaded+spray+head&qid=1573768179&sr=8-84
Tubing:
https://www.amazon.com/TotalPond-Vinyl-Tubing-1-2-inch/dp/B004DL0Y9O/ref=sxts_sxwds-bia?keywords=vinyl+tubing&pd_rd_i=B004DL0Y9O&pd_rd_r=e0063686-f494-4dc6-9db6-1cbe026f303b&pd_rd_w=IxDke&pd_rd_wg=TfExm&pf_rd_p=1cb3f32a-ccfd-479b-8a13-b22f56c942c6&pf_rd_r=WDPF56WKV5AVVB3KFAYG&psc=1&qid=1573768211
If you get the water water plug things I got, it's all about priming them and bucket height. Takes a little trial and error.
I have no experience. Do not take my word for it that this is a good idea but perhaps you could try an Aqua Globe or something similar? It's obviously not good long term but to tide you over for 5 days it should work.
They'd have them at any gardening store, Home Depot or Lowes or even a reasonably sized Walmart with a gardening section.