Reddit mentions: The best commercial door hardware

That's too much work man. Just build a simple electromagnet and hook it to your 110v outlet. mount it inside your case next to your HDD and ram. Hook up a switch for that outlet (I recommend a covered switch). If you ever need to dump that PCs data just flip the switch and leave it on.

Seomthing like this would give you a great starting point at 1500 lbs of magnetic force.

If you really wanted to get fancy you could write up a quick little java/python app with an Arduino microcontroller and put it on your phone. So you could push a button anywhere you have cell service and automatically nuke your hdds. Or if you want to get even more fancy you could require a "check in" every X amount of time or have the magnet automatically start, although that's pretty extreme.

https://www.yale.co.uk/en/yale/couk/products/mechanical/additional-security/door-bolts/ws12---hinge-bolts/

Things like this https://www.amazon.co.uk/Pro-Lok-Security-Strike-Plate-Finish/dp/B0742H7PWM/

Or

A London Bar or similar will help reinforce the strike box. If you can find a four screw strike box it will screw into the jamb more securely, while a London bar will add additional strengthening to the entire jamb.

I bought this and I highly recommend it. I believe it’s a much superior option compared to the most upvoted comment so far.

These work exceptionally well, but not cheap. Their support is awesome, but you probably wont need it.

*you'll need a core if you buy from that link.

Don't damage the door and the frame; it'll come out of your deposit, and doors are expensive. Instead, go with something like this or this.

Mortise lock Just be sure of the backset before you order one. They are normally found on commercial storefont doors.

Get a security bar. It tucks under the door knob and braces against the floor. You can't open a door secured like that.

You wouldn't need a servo motor, just an electric strike for the door frame.

I highly doubt that the key thing will work in the Mustang without a huge investment, TBH. Almost all new cars nowadays already have an active RFID in the key, and adding another system to that would be a huge PITA. Yes, anything is possible, but I don't think it would be worth the expense.

Some options our probably not thinking of that Locksmith may suggest

Door#1 Wrap Around Plate Door will need to re-drilled usually requiring Jig. So wrap around plate may not be needed.

Door#2 Bigger Wrap around plate Door will need to re-drilled usually requiring Jig

Door#3 RnR

Find a reputable locksmith in your area, Google map his address to confirm it is an actual shop. not a mailbox store.

It's a Simplex lock. Not sure of the model. One of these things.