(Part 2) Reddit mentions: The best commercial vehicle accessories
We found 43 Reddit comments discussing the best commercial vehicle accessories. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 26 products and ranked them based on the amount of positive reactions they received. Here are the products ranked 21-40. You can also go back to the previous section.
21. K40 Antenna, Tunable, 49inH, Single Band
Auto & Truck MaintenanceCountry of manufacture: United StatesManufacturer: K40
Specs:
Color | Black |
Height | 0.8 Inches |
Length | 52 Inches |
Number of items | 1 |
Width | 3.1 Inches |
22. Melling Hi Volume Oil Pump 4.6 5.4 Modular Ford 20% more volume than stock, Model Number: M340HV
- Fit type: Universal Fit
- Threaded pressure relief nut. Drive Type- Crankshaft
- No modifications required to install
- 60 psi stock pressure relief spring provided
Features:
Specs:
Height | 5.3 inches |
Length | 8 inches |
Number of items | 1 |
Weight | 3.30693393 Pounds |
Width | 6 inches |
23. Timken 710489 Front Axle Shaft Seal
- Package Dimensions: 7.366 cms (L) x 7.366 cms (W) x 2.032 cms (H)
- Product Type: Auto Part
- Package Quantity: 1
- Country Of Origin: United States
Features:
Specs:
Height | 0.8 Inches |
Length | 2.9 Inches |
Number of items | 1 |
Weight | 0.1 Pounds |
Width | 2.9 Inches |
24. Monroe SC2928 Magnum Steering Damper
- 1/2 inch Piston Rod: Heavy-duty nitrocarburized rod for long service life
- All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
- Full Displaced Valving: Better valving range on both the compression and extension cycles of the unit for a smooth comfortable ride.
- Micro-Cellular Gas Design: Allows unit to be mounted horizontally.
- Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
- Special Seal: 'Self-lubricating' fluid seal designed to retain gas without excessive wear or friction.
Features:
Specs:
Height | 2.8 inches |
Length | 19.3 inches |
Number of items | 1 |
Release date | October 2016 |
Weight | 2.6 Pounds |
Width | 4 inches |
25. PEAK BlueDEF Diesel Exhaust Fluid, 2.5 U.S. Gallon
- ENGINEERED: For use in Selective Catalytic Reduction (SCR) systems on diesel engines
- EFFICIENCY: BlueDEF diesel exhaust fluid is key to helping improve fuel economy by up to five percent
- PROTECTION: Diesel exhaust fluid is non-toxic and safe to handle
- QUALITY: Stable, colorless and odorless, and also meets ISO Standards 22241 for purity and composition
- EFFORTLESS: Easily Inject the fluid into your exhaust stream with a specialized dosing module
Features:
Specs:
Height | 9.5 Inches |
Length | 10 Inches |
Number of items | 1 |
Release date | February 2013 |
Size | 2.5 Gallons |
Weight | 24 Pounds |
Width | 9.5 Inches |
26. Timken 510070 Wheel Bearing
- Designed to allow car wheels spin smoothly and quietly
- Helps maintain proper oil clearance
- Reduces the friction between two parts
- Offers long-term reliability
- Improves performance and increases tire life
Features:
Specs:
Height | 2.1 Inches |
Length | 3 Inches |
Number of items | 1 |
Weight | 1.6 Pounds |
Width | 3 Inches |
🎓 Reddit experts on commercial vehicle accessories
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where commercial vehicle accessories are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Its actually a CB antenna made by a company called K40
https://www.amazon.com/K40-TR-40BK-Center-Trucker-Antenna/dp/B001JSYA5S?crid=3M48AVZQF90IK&keywords=k40+cb+antenna&qid=1540769716&sprefix=k40+%2Caps%2C203&sr=8-4&ref=sr_1_4
It depends on where you get it. Amazon has some that is around $20 for a 2.5 gallon jug.
this is what I picked up. I haven't used any so far as my dealer topped off with my 10k service. http://smile.amazon.com/gp/product/B004O80QP8/
I was told there was no sludge when the heads were examined, but the oil pump I believe is up to 60 psi.
oil pump
Edit spelling
Pretty cheap (compared to a shop I guess). Got everything on Amazon, so prime shipping is nice too. Only thing I didn't get on amazon was the tie rod adjusting sleeve (was planning on using the stock one but the tie rod ends didn't come out easily. So for $26 I just got a new one).
So $327.75 + tax for nearly all new front end steering? Not too shabby. We also did hubs while it was apart, and replaced the 12 point bolts that hold the hubs in.
It sounds as if you have a axle seal leak. Where the cv axle enters the dude if the tranny there is a seal similar to this Timken 710489 Front Axle Shaft Seal https://www.amazon.com/dp/B00A0JDU1W/ref=cm_sw_r_cp_api_5EobzbJ3V385M. So as for your question yes you will have to disassemble to replace that seal. You don't want to risk damage to your "new" cv axle and mostly your transmission.
Exhaust fluid is a real thing, sadly.
https://www.amazon.com/dp/B004O80QP8/ref=cm_sw_r_cp_api_NJCaCbVY3BXVH
I suggest you to just take off your spindle and go to a shop to get it pressed out which is usually about 30 bucks a side. Get these: https://www.amazon.com/gp/product/B000BZ6XJQ/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
and nothing else or OEM. I have tried Raybestos and Dorman both of em sucked.
You can just leave your ball joint on when they press the bearings out since it doesn't get in the way of the press. Get an alignment afterwards as anytime you work on your front end it screws the alignment up a bit.