(Part 2) Reddit mentions: The best interlocking tape sewing fasteners

The simplest and most effective comfort mod is a counterweight. Find something about 9 to 15 ounces or so. Velcro it with one of those velcro strap loop things to the bottom of the rear headstrap. Now you can loosen up some of the side straps so it’s not crushing your face.

I use a piece of round steel rod. A lot of others use a battery pack. Others have used rolled coins, like a roll of quarters.

I’ve had the crappy halo strap from China, the Deluxe Audio Strap with 3D printed adapters, and the Studioform strap. For me a 10oz steel rod, wrapped in electrical tape and held on with a soft Velcro strap, like this, has been the most comfortable. My daughter prefers the counterweight with the Studioform.

Hope that helps.

Suggestion: If you have already extended the Velcro straps fully and still have a hard time fitting it to your head, go to your local sewing store and pick up some extra Velcro and extend the strapping. The spring should only be used sparingly to ensure a secure hold, not to extend to fit the circumference.

https://www.amazon.com/dp/B000LNSSVY

my 2 cp

I plan to use something like these

www.amazon.co.uk/Velcro-Stick-Squares-White-VEL60235/dp/B001DYWT4M/ref=pd_cp_201_2?ie=UTF8&refRID=095499DJ4E1SY12CTRMM

You can get little self-adhesive Velcro squares (or tape if you have more patience for cutting) that have the hooks on one side and the loops on the other. Then put the hooks on one of each pair and the loops on the other, so completed matches can stick to each other, even inside an envelope or plastic storage bag.

EDIT: I have no idea if this brand is any good, but here's the sort of thing I'm talking about. https://www.amazon.com/Vkey-500pcs-Diameter-Adhesive-Compatible/dp/B012EWJIXG/

You can buy Velcro dots. They include the hook and loop side that are adhesive backed. It should hold a patch.


https://www.amazon.com/gp/aw/d/B012EWJIXG/ref=ox_sc_act_image_1?smid=AIENCBKCC31MP&psc=1

4" inch BLACK LOOP Fastener By The Foot Sew On Type https://www.amazon.com/dp/B00IJMZOWK/ref=cm_sw_r_cp_apa_i_R024Ab1GTK900

Double Sided Velcro made for fabrics

A couple of these should keep the pad from sliding. My son had to use them in his loft bed. They need replacing every 6 months or so, but worth the expense.

Maybe some little velcro dots that you can put underneath the insole at the heel?

/u/L0LPanda is correct.

https://www.amazon.com/dp/B019ZYEKOI/

I am in the process of painting my office and re-arranging everything and the Tevo hot end is currently in pieces while I mount a petsfang on the end of it... I can take a picture or 3, but it may be a week or so to get to it.

As for looks, I pulled off all the wire loom that was covering the extender to the hot end and instead use this velcro to keep the cables neat... so it is just a bundle of cables with connectors along it.

https://www.amazon.com/VELCRO-Brand-ONE-WRAP-Double-Sided-Multi-Purpose/dp/B000LNSSVY

Velcro everything in bundles and run it behind the desk. Use the large Velcro that comes in rolls and stick the soft side to your desk. Cut a few 1ft pieces and place them perpendicular to the bundle of wires. After the soft side is properly placed along the route (perpendicular) place the hard side but leave the plastic over the sticky part. If you have any question let me know.

​

link to velcro - https://www.amazon.com/VELCRO-Brand-ONE-WRAP-Double-Sided-Multi-Purpose/dp/B00JWU77N2/ref=sr_1_7?ie=UTF8&qid=1550107213&sr=8-7&keywords=velcro+roll