(Part 2) Reddit mentions: The best laser & inkjet printer labels

Good start! Though the keystone jack type and cable type should match (Cat5e, Cat6a, and Cat6a all want different jack types -- slightly different spacing for punchdowns depending on cable specs). Here are a few other links to items to consider if you're going the DIY route (all options listed if you want to get really fancy):

• LV Wall Boxes/Frames: http://www.homedepot.com/p/1-Gang-Non-Metallic-Low-Voltage-Old-Work-Bracket-Case-of-12-SC100RR/202197723 or http://www.homedepot.com/p/1-Gang-Low-Voltage-Bracket-Case-of-24-SC100A/202197725
  
• Cat6a Keystone Jacks: http://www.monoprice.com/category?c_id=105&cp_id=10513&cs_id=1051310
  
• Keystone Patch Panel: http://www.monoprice.com/product?p_id=7260 or http://www.monoprice.com/product?p_id=8630
  
• Punchdown Tool (if not using toolless keystone jacks): http://www.monoprice.com/product?c_id=105&cp_id=10509&cs_id=1050903&p_id=7043&seq=1&format=2
  
• Toner Kit: http://www.monoprice.com/product?c_id=109&cp_id=10913&cs_id=1091305&p_id=8132&seq=1&format=2
  
• Cable Comb: https://www.amazon.com/Cable-Comb-Dresser-Bundler-Organizing/dp/B01BTUI1TQ/
  
• Velcro Straps: https://www.amazon.com/gp/product/B00CAWLVHM/ or https://www.amazon.com/gp/product/B0089A1F0C/
  
• Wire Labels (exact model number depends on Cat5e/6/6a because of cable diameter): https://www.amazon.com/gp/product/B00JVEVA2I/
  
  If you get everything on that list, it'd might seem like overkill for a home install (though you'll thank yourself and have fun showing off a very professional install to friends if you have the budget/time to spare to do everything to the nines). Resell value of your home probably won't increase a huge amount from this, but if you happen to sell to a buyer who understands how this stuff works, they'll significantly appreciate it.

I would recommend using labels which are available for pretty much any type of printer, rather than more expensive printable discs. Labels give you greater flexibility with your design, and are available in a variety of paper types (matte, glossy, foil, etc).

https://www.amazon.com/Milcoast-Waterproof-Resistant-Adhesive-Blu-ray/dp/B07KJG51SR/

https://www.amazon.com/Merax-B00NY4YA2I-EZ-LABEL-Applicator/dp/B00NY4YA2I/

Whether it is a discussion about audio equipment, politics, or religion, one thing remains true: belief trumps evidence.

Here is Winer demonstrating the difference between cables at different price points: https://www.amazon.com/dp/B01HB59GQK

I will say this: When cables are poorly made, or don't meet basic specs, they can affect sound negatively. On the other hand, expensive cables cannot make the sound better.

A thermal printer does not require ink. The paper is pressed to create an imprint for the label/print. Many in this sub use dymo thermal label printers for 4x6 shipping labels. Thermal label printers are also used for receipts, but a full page size is not common.

It sounds like you’re referring to inkjet vs laser printer differences. Laser printers use toner and can be better for large volume printer (in cost savings over inkjet).

A standard shipping label is roughly a half sheet. You can get Two Label per sheet stickers for inkjet or laser printers.

You could also tape a standard piece of paper to a package to use as a shipping label (just don’t cover barcode).

30 Up - Best Print® Address Labels - 1" x 2-5/8" (Same size as 5160), 3,000 Labels https://www.amazon.com/dp/B00LFPB6X4/ref=cm_sw_r_other_apa_IqIKxbB6TC7BM

I actually prefer these over Avery. I found them easier to peel and more sticky when applied.

Blank Poker Chips from discountpokershop.com, and labels from https://smile.amazon.com/gp/product/B00Q5AVO04/ fit the blank chips perfectly!

AmazonBasics Easy Cover Address Labels for laser/Inkjet Printers, White, 8.5'' x 5.5'', 200 Labels
$0.04495 per label ($8.99 shipped with Prime). Perfect coverage. Very good adhesive. I’ve used them with my laser printer and have had no issues. No additional tape necessary unless you use an inkjet.

I have a couple of the boxes, but I also got the pdf for a couple of the sets. You can buy 8.5x11 chipboard and 8.5x11 shipping labels and print the pages from the pdf on the labels, then stick them to the chpboard. I started just doing them one sided (though the pdfs are 2 sided) for the basic monsters to save some time/money. The pdfs are around $20 , but you can print as many as you want. They sell the bases separately also. Or just buy a big box (npc codex since you won't need dups) to get all those bases. (edit: added words)

This is a great idea!

To make it even easier:


1 inch Felt Pads

I inch printable labels

1 inch wooden disks

No cutting required.

whatever you do, get temporary labels.
whether its these
http://www.amazon.co.uk/Avery-L7104REV-20-Removable-Labels-Sheets/dp/B005X6L7K8

or some specialist printer...
make sure they are temporary/removable.
You will save yourself HOURS of scrubbing glass bottles

For the jars I make for my family I usually just write in sharpie on the lids since those are one time use anyway. For gifts, I design simple labels on my computer and print them on these printable lid labels.

Your jam looks chunky and awesome! What recipe did you use?

I used these exact ones. And here's an okay picture of the results. The cards came out amazing and aren't really noticeably thicker than a regular card. The ones with the weird vertical foiling were produced with Pokemon foils.

After this gets delivered (or maybe before), I would go ahead and terminate the office side of the cables you need to connect. That way you can connect the tone generator side to the cable then go find the other end in the bundle. Be aware that sometimes the tone receiver (the part with the metal tip) needs to almost be in contact with the wire in order to receive the signal depending on how long the run is and how cheaply made the tone generator is.

Also these ( https://www.amazon.com/Mr-Label-Self-Laminating-Around-Cable-Labels/dp/B078XR72Y7 ) or these ( https://www.amazon.com/dp/B01K6MJWLE ) should help to fix the problem for the future. Or just a regular label maker and some clear tape would work as well.

I was always recommended Avery Shipping Labels for a more DIY solution.

Here's a listing of them on Amazon. https://www.amazon.com/dp/B075FWS8KK/ref=cm_sw_r_cp_apa_zaf.zb3Q7SD7N

And what it looks like on the bottle (I use 1L fliptops)
https://photos.app.goo.gl/Y1dWIrDv7xl9MHCo1

Hey thanks! It's this stuff

Mr-Label White Matte Waterproof... https://www.amazon.com/dp/B07BK4GXLR?ref=ppx_pop_mob_ap_share

Just use those hello my name is stickers and call your new social club the "Hello My Name Is Club". You know, it's for people to meet new people and make friends..... while food happens to be around. But really the main focus is to make new friends of course.

These stickers, very cheap... https://www.amazon.com/Avery-Border-Badge-Labels-Inches/dp/B00281UYIW

I wouldn't think so. What you want is probably something like this. According to the description, the company that makes them also has templates for MS Word and other programs. I would imagine they also set/tell you the print settings when printing them.

By the way, here's all the various manuals for that printer.

I get the passport stamps for all of the National Parks I visit and have always seen the books for sale in the visitor centers where the stamps are located. On the off chance that the parks you visit are sold out, you can always stamp a sticker and then put the sticker in the book at a later date. I have used these 1.5" label/stickers that I ordered from Amazon. I would expect that they can be found in an office supply store if you don't have time to order. https://smile.amazon.com/gp/product/B07G7HJR41/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Buy plain pint glasses at any store. Get clear Avery sitckers. Print your design, stick them to the glass.

https://www.amazon.com/Avery-Print-Glossy-Square-22853/dp/B01M8OLVEV

Won't last a trip through a dishwasher, but good enough for a photo shoot.

something like this might work https://www.amazon.com/Avery-Print-Glossy-Square-22853/dp/B01M8OLVEV?_encoding=UTF8&pd_rd_i=B01M8OLVEV&pd_rd_r=97VZ9FEQ6ZP3P841QATV&pd_rd_w=4UceF&pd_rd_wg=8YItB&psc=1

I do this but use circle sticker paper so I don't even have to cut anything or show any signs of artistic skill.

Something like this: https://www.amazon.com/1-inch-Diameter-Labels-Inkjet-Printers/dp/B01DE56YXO/ref=sr_1_fkmr2_2?ie=UTF8&qid=1504720857&sr=8-2-fkmr2&keywords=printing+1%22+circle+stickers+avery

Ah ha - I thought it might be cheaper to just buy round stickers, but it doesn't look like it, at first glance!

I do the same thing with wood tokens.
https://www.amazon.com/gp/aw/d/B01CSV14JE/ref=mp_s_a_1_1?ie=UTF8&qid=1506542121&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=wood+tokens&dpPl=1&dpID=51mEHnSvQXL&ref=plSrch

And

1 inch stickers
https://www.amazon.com/gp/aw/d/B01DE56YXO/ref=mp_s_a_1_2?ie=UTF8&qid=1506542189&sr=8-2&pi=AC_SX236_SY340_FMwebp_QL65&keywords=1+inch+circle+stickers&dpPl=1&dpID=51o3QxXG4jL&ref=plSrch

I ordered these stickers and these chits

I typically use these.

https://www.amazon.com/Mr-Label-letter-Sheet-Self-adhesive-Cable/dp/B01K6MJWLE/ref=sr_1_4?keywords=cable+tags&qid=1568124422&s=gateway&sr=8-4

I am partial to this one. I also just ordered some of these, but haven't tried them out yet.

look for avery 5292 labels. Here

YOU KNOW FUCKEN KNOW IT CHECK THIS OUT 200 COVER ADDRESS LABELS FOR ONLY 2 DOLLARS CAN YOU SAY, SET, FOR, LIFE

Any place that sell office supplies usually has some

https://www.amazon.com/dp/B00281UYIW