#596 in Automotive
Use arrows to jump to the previous/next product
Reddit mentions of ATLIN Touch Up Paint Brushes, 100 Pack of 1.5mm Disposable Micro Applicators for Automotive Paint Chip Repair
Sentiment score: 3
Reddit mentions: 3
We found 3 Reddit mentions of ATLIN Touch Up Paint Brushes, 100 Pack of 1.5mm Disposable Micro Applicators for Automotive Paint Chip Repair. Here are the top ones.
or
- Precision Tips – Each touch up paint applicator features a superfine 1.5mm tip which can be easily bent to any desired angle for those hard to reach areas
- No Mess – The paint touch up brushes are designed with lint free, non-drip, non-absorbing fibers to reduce mess and waste
- Easy Use and Storage – Specially designed container functions as a micro brush dispenser – a flap on the end opens and paint touch up sticks can be dispensed one at a time
- Variety of Uses – Ideal for automotive paint touch up, various hobby work, and car detailing
- Size & Quantity – 100 pack of 1.5mm automotive touchup brushes
Features:
Specs:
| Color | Purple |
| Height | 1.5 Inches |
| Length | 5 Inches |
| Number of items | 1 |
| Size | 1.5mm |
| Width | 3 Inches |
If that is all the actual rust, I dealt with rust spots about that size on my NB. I first used a sanding pen to sand the rust down. Then I applied some OEM Touchup paint. Last thing, I used Langka blob eliminator to form it to the rest of the paint. You can't tell its been touched up from about 10 feet away, any closer than that and you can tell. Better than leaving rust to sit. Here are links for all of those things.
Sanding Pen
https://www.amazon.com/gp/product/B000FN8H52/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
Blob Eliminator
https://www.amazon.com/gp/product/B0074BMB0U/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
Micro Brush (Helps with touchup, sometimes)
https://www.amazon.com/gp/product/B01N6D0207/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
The best part about the blob eliminator, if you mess it up you can use it to completely remove any touchup paint, and not damage the OEM Paint. The stuff is magical for small touchup spots, work on it until you are happy with the results. Will be much cheaper than 450$
The easiest thing to do is get some touch-up paint from somewhere like Automotive Touchup and fill it in. If you're really ambitious, you can fold a piece of sandpaper (800 - 1000 grit) and lightly sand the rust (be careful not to scratch the surrounding paint -- you ONLY want to sand inside the chip). You won't get all the rust off, but it'll ensure the paint adheres. That step is optional, so don't worry if you can't do it. Next, make sure you clean the surface good with rubbing alcohol or prep solvent before applying paint. I would also recommend getting a more precise applicator to make the job easier. You can also chip off the reaming piece of paint that is raised and fill that in.
​
If the chip is deep (which this one looks like it is), then you can apply multiple coats. Just make sure you let the paint dry between coats (the paint should have instructions for how long that'll take). It's not going to look perfect, but it won't be rusty anymore.
​
And finally, you can get some clearcoat to ensure the touch up is shiny like the rest of the car. For your context, most cars are painted in what's called base coat/clear coat. Meaning there's two layers of paint: (1) a bottom layer which is the color -- in this case, the grey (this drys in a matte finish); and, (2) a top layer of clear paint which makes the car shine (this, obviously, dries shiny). The color touch up you get is the base coat and will dry matte, so if you want to match the car's finish, you'll also need the clear.
​
Hope this helps!
Unfortunately there's no magic to it. Carefully sand away (2500-3000 grit) the previous poor touch up job (use the sandpaper wrapped around the credit card trick). Make sure you get rid of all the crappy prior job, then clean it up with isopropyl alcohol. Then start laying in the paint, then the clear coat, making sure you keep it as level as possible so you don't have a bubbled up bit of clear. Then if you have the time/patience you can wet sand and polish to really perfect it (that depends on the severity of the chip/scratch if it's worth it)
A tool like this, or this is incredible for touch up, since the brushes that come in most bottles are too big to be useful. This video shows him using that tool, and how useful it is. I can't recommend it enough.