Best furniture hardware according to Reddit
Reddit mentions of BQLZR Stainless Steel Kitchen Adjustable Feet Round 2" Dia Furniture Leg Pack of 4
Sentiment score: 6
Reddit mentions: 35
We found 35 Reddit mentions of BQLZR Stainless Steel Kitchen Adjustable Feet Round 2" Dia Furniture Leg Pack of 4. Here are the top ones.
- [Load-bearing] Each load-bearing capacity is 25KG, 4 of them have a total load-bearing capacity of 100KG, and the number can be added as needed.
Although the stainless steel part is hollow, the stainless steel itself is very hard. Our product qualification certificate proves this. The service life of the product can reach fifteen years or more. - [Screws] The suitable screws for the furniture legs are M3.5x16mm, They are not included in the product
- [Basic function] The amount of adjustment provided by the threaded rubber stop is sufficient to compensate for uneven ground
It is an ideal choice for coffee tables, sofas, TV cabinets, beds, bathroom cabinets, office furniture, kitchens, cabinets, shelves, etc.
It can also be used as a support for the desktop partition to create a drawer space
They can adjust the height of the cabinet feet from 10CM to 11.5CM, which can blow out the debris under the cabinet - [Features] The plastic part design will not wear your painted partitions or wooden floors
The lightweight design of stainless steel, even if the body bumps against the stainless steel furniture feet, there will be no pain or injury
Smooth design of stainless steel material, you can paste your favorite drawings on the stainless steel part - [Note] 1,The furniture needs to be lifted instead of pushed and pulled when moving, which is beneficial to prolong the service life of the furniture feet2. Need to tighten the plastic thread part.3.Adjust the furniture to a suitable height for more comfortable use
Features:
Specs:
Color | Black,silver |
Height | 3.93700787 Inches |
Length | 1.968503935 Inches |
Number of items | 4 |
Size | 104mm |
Width | 0.0393700787 Inches |
▼ More
#1 of 368
PC: https://pcpartpicker.com/list/Jx4qxG
Desk: Ikea Karlby Countertop https://www.ikea.com/us/en/catalog/products/70335212/#/50335208
Charging Station: https://www.amazon.com/gp/product/B077CZL5FB/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Wallpaper from Wallpaper Engine: https://steamcommunity.com/sharedfiles/filedetails/?id=1172827797
Dual Monitor Stand: https://www.amazon.com/VIVO-Monitor-Adjustable-Screens-STAND-V002/dp/B009S750LA/ref=sr_1_3?keywords=vivo+dual+monitor+stand&qid=1563902621&s=gateway&sr=8-3
Furniture Stands (silvers bars between the desk and the drawers): https://www.amazon.com/gp/product/B00KQH8HMU/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Microphone: https://www.amazon.com/ZINGYOU-Microphone-BM-800-Adjustable-Double-layer/dp/B01MZCS8MY/ref=sr_1_1_sspa?keywords=bm-800&qid=1563902460&s=electronics&sr=1-1-spons&psc=1
Plants: https://www.amazon.com/gp/product/B07698CVNW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Extended Mouse Pad: https://www.amazon.com/gp/product/B00QM9KL5M/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Software for desktop information/date/time: Rainmeter using NXT-OS https://www.rainmeter.net/ https://nxtos.com/
Ikea sells similar ones, but it looks like the risers in OP's photo are these ones.
Mousepad - https://www.pcgamingrace.com/products/glorious-3xl-extended-gaming-mouse-pad-24x48#
PC Specs - https://pcpartpicker.com/list/Pvp6tJ
The metal spacers - https://www.amazon.com/gp/product/B00KQH8HMU/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
The spacers are screwed into the tops of the alex drawers with some small screws, and the desktop just sits on top and its heavy enough it doesnt move.
​
https://www.amazon.com/gp/product/B00KQH8HMU/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
No problemo, here you go.
They are adjustable but they work nicely for me at the lowest height.
I have almost this same desk (check my post history). The capita legs at Ikea are 4inches tall which almost made my desk TOO high. Love it over all though. There are better ones which I wish I would have went with BLQZR legs on Amazon which I believe are 2-2.5inches which would have been better, although I don't know the build quality on those. The Ikea Capita legs are sturdy as hell.
EDIT: these are the legs I was talking about on amazon, they were the ones the YouTuber RandomFrankP used as well https://www.amazon.com/BQLZR-Stainless-Kitchen-Adjustable-Furniture/dp/B00KQH8HMU
Anyone have a link for that desk?Edit: Think I figured it out and will edit this comment for more visibility.
Appears to be the Karlby countertop combined with two Alex drawer sets and then with some risers (probably these but maybe these as pointed out by /u/unsupportive-tech) all combined to make the desk, which is not a product all in itself (at least it wouldn't seem that way.
What I ultimately wound up doing was going the Ikea route. I bought 2 of the Alex drawer units, and a 98" kitchen counter top as well as 4 legs. You can get a smaller counter top to match your available space. I am very happy with the set up and the whole thing was around $300 which is far less than you would spend on a purpose made desk. Links to the parts are below.
Alex Drawer Unit
Ekbacken Counter Top
Olov Legs
Small legs for spacing off the top of the drawer units.
BQLZR Stainless Steel Kitchen... https://www.amazon.ca/dp/B00KQH8HMU?ref=ppx_pop_mob_ap_share
This
Hello, not OP, but they are something like these I believe.
​
https://www.amazon.com/gp/product/B00KQH8HMU/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B00KQH8HMU/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
https://www.amazon.com/BQLZR-Stainless-Kitchen-Adjustable-Furniture/dp/B00KQH8HMU
Probably something like these
I got you my friend
Here ya go!
BQLZR Stainless Steel Kitchen Adjustable Feet Round 2" Dia Furniture Leg Pack of 4 https://www.amazon.com/dp/B00KQH8HMU/ref=cm_sw_r_cp_apap_dEv1YmfgqRX9T
they worked out great I mounted them to the drawer units and the desk just sits on top of them. there is no sliding around without some heavy force.
A lot of people use risers like these
The desk is IKEA and one part from Amazon:
Karlby Countertop:
https://www.ikea.com/ca/en/p/karlby-countertop-oak-90335211/
Alex Drawers x2:
https://www.ikea.com/ca/en/p/alex-drawer-unit-white-10192824/
Desk Risers:
BQLZR Stainless Steel Kitchen Adjustable Feet Round 2" Dia Furniture Leg Pack of 4 https://www.amazon.com/dp/B00KQH8HMU/ref=cm_sw_r_cp_api_i_1su7CbPE8JM5P
If you look up the “Karlby IKEA Desk” online or YouTube or any media outlet I’m sure you’ll find a plethora of information. It’s a very popular desk setup.
Not to mention it fit perfectly in my bedroom nook.
That height is correct. The KARLBY is 1 1/2" thick. So the top of the desk is 29". My old desk was 31 1/2" high so I was skeptical about loosing the few inches as well. But I can honestly say I much prefer the height of the IKEA build now that I'm used to it.
Also you can always use something to make it higher if you don't like it. I've seen a few IKEA builds use these to make increase the height. Here is a Reddit post where the person has these legs
Ah that makes sense. I'm planning to use some 4 in legs to give my desk some extra height. https://amzn.com/B00KQH8HMU If I don't bolt the braces into the Aleks drawers, do you think sagging will be a problem? Thanks!!
Hey! Thank you I appreciate that! I made them using these [legs] (https://www.amazon.com/gp/product/B00KQH8HMU) and used just the top part of this [monitor riser] (https://www.amazon.com/gp/product/B01A6LS9P0). Anything for the top works, one of the stands is a computer door from an ikea desk (can you tell which one, haha). I just found a monitor riser that was close in size.
https://www.amazon.com/gp/aw/d/B00KQH8HMU?psc=1&ref=ppx_pop_mob_b_asin_title
Hey OP, i came across this which may help you
https://www.youtube.com/watch?v=mBeTm723xFs
He links to the legs he used in the description, they are here - https://www.amazon.com/gp/product/B00KQH8HMU/ref=as_li_tl?ie=UTF8&tag=i0698-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B00KQH8HMU&linkId=474da406e3943f49980ac15715cf8c5f
https://www.amazon.com/gp/product/B00KQH8HMU/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
I found them!
They look perfect. Thanks. Now I just gotta rip everything off my desk and put them on. Hmph.
https://www.amazon.com/gp/product/B00KQH8HMU/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
yeah bro its the ikea linnmon desk with two alex drawers https://www.ikea.com/us/en/p/linnmon-alex-table-white-s59932698/
and i also added these stands to the drawers to raise the tabletop up a little https://www.amazon.com/gp/product/B00KQH8HMU/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
Here. but it's on amazon.ca
Yea no worries, here you go
BQLZR Stainless Steel Kitchen Adjustable Feet Round 2" Dia Furniture Leg Pack of 4 https://www.amazon.com/dp/B00KQH8HMU?ref=yo_pop_ma_swf
BQLZR Stainless Steel Kitchen... https://www.amazon.com/dp/B00KQH8HMU?ref=ppx_pop_mob_ap_share here you go (:
https://www.amazon.com/BQLZR-Stainless-Kitchen-Adjustable-Furniture/dp/B00KQH8HMU
Oh those are just kitchen legs from amazon
https://www.amazon.ca/BQLZR-Stainless-Kitchen-Adjustable-Furniture/dp/B00KQH8HMU/ref=asc_df_B00KQH8HMU/?tag=googleshopc0c-20&linkCode=df0&hvadid=292948034357&hvpos=1o2&hvnetw=g&hvrand=12992890320284480019&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9000671&hvtargid=pla-349478070909&psc=1
BQLZR Stainless Steel Kitchen... https://www.amazon.com/dp/B00KQH8HMU?ref=yo_pop_ma_swf
Ikea Capita Legs are popular: https://m.ikea.com/us/en/catalog/products/art/60263574/
Others on Amazon: https://www.amazon.com/dp/B01NCKZRTL/ref=cm_sw_r_oth_api_G7KVBbXT06DCJ
https://www.amazon.com/dp/B00KQH8HMU/ref=cm_sw_r_oth_api_Z8KVBbDM4Y4N2
https://www.amazon.com/BQLZR-Stainless-Kitchen-Adjustable-Furniture/dp/B00KQH8HMU/ref=sr_1_1?keywords=BQLZR&qid=1566188661&s=gateway&sr=8-1
These ones are the ones I got https://www.amazon.com/dp/B00KQH8HMU/ref=olp_product_details?_encoding=UTF8&me=
Yes Exactly. I screwed them to the top of the Alex drawers, they even came with the screws.