Reddit mentions of Club 3D CAC-1080 DisplayPort 1.4 to HDMI 2.0B HDR Adapter Supports 4096X2160@60Hz High Dynamic Range

More fast speed use DP 1.4 to HDMI 2.0 4k 60hz cable.
https://www.amazon.com/CAC-1080-DisplayPort-Adapter-displays-4096x2160/dp/B077JB28KM/

This is correct. DisplayPort to HDMI directly would be limited to HDMI1.4 speeds.

I used a Club3D CAC-1080 Active DisplayPort 1.4 to HDMI 2.0b HDR Adapter on my R9 Fury and it worked with a 6-foot HDMI2.0 cable to get HDR, but there was occasional flicker (I think that's right on the brink of what DP1.2 can do). However, with a 15-foot HDMI2.0 cable, I could only do 8-bit non-HDR from my R9 Fury, so I'd keep that in mind.

> I use wireless headphones how do I use them with the headset as many setup videos have recommend

you wont have to change anything and can just use your wireless headset as you do now. the headsets have a headphone jack but you are not forced to use it, the headset will just be an additional audio device in the sound control panel list like you probably have many other ones there already you dont use.

when you install the headset and software you may just have to select your wireless headset again as the default device.

the only other stuff you gotta think about as others have said here you will want to get the common pluggable brand bluetooth 4 adapter if you arent already covered and you also might want to check if your GPU's HDMI port is version 2.0 or earlier. earlier versions will either not work or limit you to 60hz instead of the 90hz the headset can do.

that was the issue when I got my lenovo MR headset I found my GPU was only HDMI 1.4 (radeon r9 290) so I had to get the Displayport to HDMI 2.0 adapter. (Club3D CAC-1080 Active DisplayPort 1.4 to HDMI 2.0b).

Your TV has displayport?? Or you're planning to use an adapter like this or this? If so, there's not much data on HDR working over that type of connection. It's not supposed to work (because it's DP 1.2 and not 1.4) , but one Intel CPU guy did manage to get HDR working. Haven't heard anything on AMD.

So far all AM4 boards have done HDMI 2.0 regardless of what their specs say. The tested ones are in the Wiki.

Crap, replied to myself instead of you.

Port: http://h20195.www2.hp.com/v2/GetPDF.aspx/4aa6-9224enuc.pdf Page 3/5

Video showing HDR: https://1drv.ms/v/s!ArKGv9LOf89ctoFR5ATCPGDxBOQo2g?e=VzuB25

DisplayPort adapter used: https://www.amazon.ca/gp/product/B077JB28KM/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

​

EDIT: also, to clarify, my setup is Elitedesk 800 Mini G3 > CAC-1080 Displayport-HDMI Adapter > Amazon Basics high speed HDMI Cable > Onkyo TX 373 receiver > amazon basics high speed HDMI > Hisense 50" 4k HDR10 tv

You need an active adapter.

https://www.amazon.com/CAC-1080-DisplayPort-Adapter-displays-4096x2160/dp/B077JB28KM/ref=sr_1_16?ie=UTF8&qid=1525841546&sr=8-16&keywords=displayport+to+hdmi+4k+60hz

Like this.

The newest versions of DP can do 4k at 120hz. So yes it's bs.

I accidentally bought a non active DP to HDMI and had the same issue you're having. Sent it back and got this one. Only asking because I made this mistake. Are you 100% sure it's an active one?

The only way I can think of to check 90Hz is to play a low quality video on DeoVR Video Player and have it display FPS. It should cap out at 90FPS if you're in 90Hz mode.

I use this one:
Club3D CAC-1080 Active DisplayPort 1.4 to HDMI 2.0b HDR Adapter (support displays up to 4k/UHD/ 4096x2160 @60Hz HDR) https://www.amazon.com/dp/B077JB28KM/ref=cm_sw_r_cp_api_i_9NnZCbWSDQY8N

Good chance its the adapter yea, you might have to do some more research and find an adapter that people have specifically used for the rift. VR is very sensitive to adapters and extenders so find a 4k 60hz capable one and you should be good. Heres one that has some good reviews from people using it with VR. https://www.amazon.com/dp/B077JB28KM/ref=cm_sw_r_cp_apa_i_OQh6CbFB1T6SX

This is the adapter I bought: https://www.amazon.com/dp/B077JB28KM/ref=cm_sw_r_cp_apa_P947BbMJA09PZ

It looks like that Cable Matters one only supports 4K 30Hz and no HDR. That'll be a hard pass for me.

Question: I have an RTX 2080FE and it only has one HDMI Port that has to be used for my monitor. I need another HDMI(2.0) for my WMR VR headset. Should using a Displayport to hdmi adapter like this work or is swapping the plug each time I use VR my only option?

https://www.amazon.com.au/CAC-1080-DisplayPort-Adapter-displays-4096x2160/dp/B077JB28KM

You can enable VRR over diplayport in the nvidia control panel.

So the top 2 options may just be possible.

I wanted to get 1440p@120hz with VRR enabled from my 2080ti to my LG C9

I just tried it with my Acer ET322QK and the Club3D Display Port 1.2 to HDMI 2.0 active adapter, and it didn't work. I might try to mess around with the settings on the X, but I'm pretty sure it's a no go.

They do make a newer version of the adapter that supports HDR and Displayport 1.4 if anybody is interested in trying it, but it does state on the product page that the source system must support display port, so seems unlikely.

https://www.amazon.com/Club3D-Displayport-1-2-HDMI-CAC-1070/dp/B077JB28KM?th=1

is a 2200g mobo case psu cheaper than a pentium + asrock deskmini. Is there anything that a 2200g htpc can do that my g4560 one cannot? i have a 4k hdr tv and i use this adapter

https://www.amazon.com/dp/B017BQ8I54/ref=twister_B0784TP7M2?_encoding=UTF8&psc=1

i see they make a new one that does hdr.

https://www.amazon.com/dp/B077JB28KM/ref=twister_B0784TP7M2?_encoding=UTF8&th=1

should i be getting that new adapter? id be able to watch 4k hdr youtube videos with that new adapter?