#15 in Hardware adhesives & sealers
Use arrows to jump to the previous/next product
Reddit mentions of Countertop Epoxy - FX Poxy - UV Resistant Resin - 2 Quarts (Ultra Clear, 10-15 Sq Ft)
Sentiment score: 2
Reddit mentions: 4
We found 4 Reddit mentions of Countertop Epoxy - FX Poxy - UV Resistant Resin - 2 Quarts (Ultra Clear, 10-15 Sq Ft). Here are the top ones.
Buying options
View on Amazon.comor
- EASY TO USE - Our step by step instructions are detailed for beginners as well as experience and ready to use your surface in just 36 hours
- UV RESISTANT - Highest UV-resistance in the industry, safe for both indoor and outdoor applications
- QUALITY PRODUCTS - Durable and long lasting. Scratch resistant and heat resistant up to 500 degrees.
- FOOD SAFE & NON-TOXIC - Zero VOC - which means no solvents or harmful odors. Food safe, non-toxic application.
- VERSATILE PRODUCT - Pour directly onto your pre-existing countertops, tile or wood. Use Countertop Epoxy’s colors to create a custom design.
Features:
Specs:
Height | 8 Inches |
Length | 5 Inches |
Weight | 5 Pounds |
Width | 6 Inches |
Interesting idea! I went on a hunt and this is the coolest thing I've found:
It's done with a process called plastination:
> The water and fat are replaced by certain plastics, yielding specimens that can be touched, do not smell or decay, and even retain most properties of the original sample.
They're been doing this since 1970s so I figure there's probably a guide online. Next logical step was a search for "DIY plastination":
I do not have any evidence that the same procedure would work on mushroom flesh, other than the flickr link above.
EDIT:
Per the plastination patent by Gunther von Hagens:
>EXAMPLE 3
>A globular cactus having a diameter of approximately 15 cm was partly hollowed out from its root end by means of a curette, and it was then immersed sequentially for three hours each in 50% aqueous acetone, pure acetone, and dichloromethane. Thereafter it was immersed in a solution of a commercial epoxy resin prepolymer stable at low temperature, but curing at elevated temperature. The vat holding the prepolymer and the immersed cactus was stored in a vacuum at 10° C. for eight hours, whereby all volatile solvent was extracted. When drained of excess prepolymer and held in an oven at 40° C. for six hours, the cactus hardened, but otherwise retained its original appearance and color.
Just curious how much a DIY setup would cost so I made a shopping list:
How long since the paint was put on there? If it's had time to cure, give it a cleaning and a light scuffing. Then put a clear polyurethane over it.
If it's, say, an older piece and you want to preserve the "patina", use shellac as a barrier coat, then put the poly over that.
Or you could go buck wild and hose it down if you wanted.
There is something to that.
You know, you could really change the look of it with some bar top epoxy. Does that interest you at all?:
https://www.amazon.com/dp/B00BJORLEE?psc=1
What do you think if this?
https://www.amazon.com/Countertop-Epoxy-Resistant-Resin-Quarts/dp/B00BJORLEE/ref=sr_1_4?ie=UTF8&qid=1518473250&sr=8-4&keywords=uv+resistant+resin