#17 in Automotive greases
Use arrows to jump to the previous/next product
Reddit mentions of CRC Industries, Inc. 05109 Dielectric Grease .5Oz Tube
Sentiment score: 1
Reddit mentions: 3
We found 3 Reddit mentions of CRC Industries, Inc. 05109 Dielectric Grease .5Oz Tube. Here are the top ones.
or
- Seals, protects and insulates electrical contacts and bulbs.
- Prevents corrosion by repelling moisture, dirt and oils that can penetrate and harm electrical connections.
- Precision Tip Applicator applies a thin stream of grease directly on the work area.
- Improves electrical performance.
- Reduces arcing and voltage drop.
Features:
Specs:
| Color | Translucent White |
| Height | 1 Inches |
| Length | 7.88 Inches |
| Number of items | 1 |
| Release date | February 2013 |
| Size | 0.5 Ounces |
| Weight | 0.08 Pounds |
| Width | 2.75 Inches |
I just replaced my switch assembly and starter relay. Initial problem was as you mentioned. Had manual and next thing in the list to test was relay, friend showed up and shorted with a screw driver. Bike fired right up. He said thats the problem, $10 @ ebay and easy fix that didnt work. Dissassembled switch cause it was a little sticky, had to pull it out after starting once in a while or it'd keep spinning the starter motor, and watched what happened when hitting the button. The button moved, as it should, but also moved the button seat on the inside of the housing. So, sometimes worked, sometimes stuck, sometimes didn't work at all. The button is similar to shorting the relay in that it just connects the circuit long enough to start the bike. So I went to the local bike recycle place and dug through bins of handlebar housings untill I found a switch that looked like mine inside and out. $40 dollars and an hour later I was starting the bile every time with ease. Some $11 liquid electrical tape on the button seat wire connections that had split wire housings due to all the moving around while inspecting and di-electric grease made all the moving parts and plug connections lubed and water tight. I took a vid too if you're interested...
I got these lube and grease.
Krytox GPL 207 Grease, Pure PFPE/PTFE, 0.5 oz Tube https://www.amazon.com/dp/B00MWLD61A/ref=cm_sw_r_cp_api_i_wUmCCbTXMAEDQ
CRC 05109 0.5 Ounces Technician... https://www.amazon.com/dp/B000CCIDAA?ref=ppx_pop_mob_ap_share
The grease goes on anything metal and the lube goes on plastic to plastic contact.
This guy's channel was very helpful and informative for me! You should check it out.
/u/taehatypes
https://youtu.be/cD5Zj-ZgMLA
By the way, there really is such a thing as headlight/blinker light fluid. It's more like a thin paste, it's conductive, and it's oil based so it keeps the contacts from corroding if they get exposed to Amy moisture.
And no, I'm not shitting you.