Reddit mentions of Creality Ender 3 3D Printer Fully Open Source with Resume Printing All Metal Frame FDM DIY Printers 220x220x250mm

They are fun and relatively cheap! You can find a smaller one for around $250 that would work great! Come visit us over at /r/3Dprinting for a ton more info.

$200 will get you a decent 3d printer these days. Then you could sell people your whole stock

The Creality Ender 3 ($230 about) is a GREAT little printer, if you can build it yourself (it's pretty simple!) and produces amazing results for such a low-cost printer. I have one myself and it prints just as well as my over $1000 Lulzbot Mini.

https://www.amazon.com/Official-Creality-3D-Printer-Source/dp/B07D218NX3/ref=sr_1_2_sspa?gclid=EAIaIQobChMIwbmiqdj75AIVeR-tBh3HrQKtEAAYAyAAEgITWfD_BwE&hvadid=295831533020&hvdev=c&hvlocphy=9060440&hvnetw=g&hvpos=1t3&hvqmt=e&hvrand=5423867397037548362&hvtargid=kwd-431075118707&hydadcr=8271_9755811&keywords=creality+ender+3&qid=1569954532&s=industrial&sr=1-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEySFdJV01BUUlOVDFNJmVuY3J5cHRlZElkPUEwNzMxNjc2MzFHMExXOVdJN1RQUiZlbmNyeXB0ZWRBZElkPUEwODA4ODAzMldSNTRQMDZOTzBXQyZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

Mine was purchased through Amazon:

https://smile.amazon.com/gp/product/B07D218NX3/ref=oh_aui_search_asin_title?ie=UTF8&psc=1

​

Some of this is standard stuff you probably already have, but:

• Engineer square and measuring tape for assembly
  
• Arduino Uno and jumper wires to flash firmware
  
• Wire to eliminate XT60 connector - this was what I decided to do after the connector started melting, you could just do it right away and save the hassle later. Or maybe you won't run into this problem at all!
  
• Glass bed, glue sticks, isopropyl alcohol to clean bed
  
• Upgraded springs
  
• Sandpaper, needle files and test probe kit for cleaning up prints
  
• Rasberry pi and picam to set up octoprint
  
• Lots of filament :)
  
  ​
  
  Some people choose to get an SD card extension cable, I haven't seen a need for it myself but thought it worth mentioning.

In theory, they are. The Ender 3 Pro is slightly different, since it uses a wider extrusion for the bed rail, making it more stable (in theory). If you're looking to buy on Amazon, I believe this is sold by Creality themselves and fulfilled by Amazon (which might make any warranty replacements easier):

https://www.amazon.com/Official-Creality-3D-Printer-Source/dp/B07D218NX3

It was. All were claimed.

Official Creality 3D Ender 3 Printer Fully Open Source https://www.amazon.com/dp/B07D218NX3/ref=cm_sw_r_cp_apa_i_D3jaCb01W6WE7

Looking to get into 3D printing mostly for wargaming terrain and some other misc things. Trying to stay on the cheaper side of things: $200-250.

Been looking at the Ender 3 and this filament since there are several different shades for the price.

Is there anything else I might need with that printer? Does anyone have experience with that filament or is there a better kind that is around the same price point?(Doesn't have to have multiple colors, just thought I would get something with multiple colors to begin with) Last question, what is the best software if I plan of using the printer mostly with Ubuntu?

Thanks in advance.

i see a lot of people say the same thing about Ender 3. now i see a lot of copycats of that model.

but this must be a legit one right? https://www.amazon.com/gp/product/B07D218NX3/

https://www.amazon.com/Official-Creality-3D-Printer-Source/dp/B07D218NX3

https://www.amazon.es/Creality-3D-impresora-Ensamblada-impression/dp/B07D218NX3/ref=sr_1_2?srs=15777914031&ie=UTF8&qid=1542106979&sr=8-2

https://www.amazon.es/Creality-3D-Impresora-Easy-assemble-Impresión/dp/B07DPJHML9/ref=sr_1_11?srs=15777914031&ie=UTF8&qid=1542106979&sr=8-11

https://www.amazon.es/Creality-3D-Ender-3-Printer/dp/B07D39QWGM/ref=sr_1_27?srs=15777914031&ie=UTF8&qid=1542107057&sr=8-27 .

https://www.amazon.es/Creality-Resume-Printing-220x220x250mm-Source/dp/B07JC93LKS/ref=sr_1_31?srs=15777914031&ie=UTF8&qid=1542107057&sr=8-31

I think that they change from versions but that doesn't explain a 60€ difference I tried sorting it by newest to oldest and maybe its that but I'm not sure

So I want to get the Ender 3, and unfortunately I’m locked into using Amazon (gift cards). There’s a litany of different listings for the Ender 3 and Ender 3 Pro; I’m not sure which listing is best, or if there’s a real difference. The prices are within a reasonable range of each other (230-250 for the regular, 270-300 for the Pro), but I know that QC can vary widely by machine. Does anyone know of/have any suggestions for which listings are the most reliable? I’m leaning towards the regular since the Pro features aren’t something I’m interested in as much.

Various Listings:
Creality Ender 3 3D Printer with Resume Printing Function for Home & School Use 220x220x250mm https://www.amazon.com/dp/B07FFTHMMN/ref=cm_sw_r_cp_api_i_1QfxCb1NEWRV0

Official Creality 3D Ender 3 Printer Fully Open Source https://www.amazon.com/dp/B07D218NX3/ref=cm_sw_r_cp_api_i_sRfxCbNXRZ5AW

Official Creality 3D Ender 3 Pro Upgraded 3D Printer with Removable Magnetic Bed https://www.amazon.com/dp/B07K3SZBHJ/ref=cm_sw_r_cp_api_i_XRfxCbH8D4B7B

Official Creality 3D Ender 3 Pro Upgraded 3D Printer with Removable Magnetic Bed https://www.amazon.com/dp/B07K3SZBHJ/ref=cm_sw_r_cp_api_i_XRfxCbH8D4B7B

I have been looking into 3d printing and decided the best place to start would be with an ender3 so that I would be able to have quality prints, for a reasonable price. However, looking on several websites there are different prices and I am just not sure which one would be best to go for.

Amazon has the ender-3 from Comgrow for $230 here: https://www.amazon.com/gp/product/B07BR3F9N6/ref=ox_sc_act_title_1?smid=A2ALB3RMNIRLH8&psc=1

However, it says the official one, again for $230 is here: https://www.amazon.com/Official-Creality-3D-Printer-Source/dp/B07D218NX3/ref=sr_1_3_sspa?keywords=creality&qid=1569107314&s=gateway&sr=8-3-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExWjJVQlE0MjhKMEQ2JmVuY3J5cHRlZElkPUEwODU2MjU2MzNSMTQ2SlFGUjg1OCZlbmNyeXB0ZWRBZElkPUEwODA4ODAzMldSNTRQMDZOTzBXQyZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

I also found a website listing it on sale for $189 here: https://www.gearbest.com/3d-printers-3d-printer-kits/pp_1845898.html?

I got the last link from Maker's Muse video and I am just very confused. I do not want to spend more money than I need to as filament is also rather expensive.

Any help would be appreciated, I really want to get it for the cheapest price without it coming in damaged or in a month.

It was an Amazon prime day deal yesterday. Today this is the best deal I could find on this particular printer. There might be better deals on this or other printers later, sorry.
https://www.amazon.com/Official-Creality-3D-Printer-Source/dp/B07D218NX3/ref=mp_s_a_1_3?keywords=creality+3d+printer&psr=PDAY&qid=1563285900&s=prime-day&sr=1-3-catcorr