#18 in RC vehicle parts
Use arrows to jump to the previous/next product
Reddit mentions of Gens ace 11.1V 2200mAh 3S 25C LiPo Battery Pack with Deans Plug for RC Heli Airplane Car Boat Truck
Sentiment score: 3
Reddit mentions: 7
We found 7 Reddit mentions of Gens ace 11.1V 2200mAh 3S 25C LiPo Battery Pack with Deans Plug for RC Heli Airplane Car Boat Truck. Here are the top ones.
Buying options
View on Amazon.comor
- Gens ace Professional LiPo Battery, best 3s 11.1v lipo for your rc model
- Quickly Recharged, Long Cycle Life (150 times minimum), up to 200Wh/kg energy density
- Parameter: Weight, 190g; Dimension(L*W*H), 107*34*26mm; Connector, Deans Plug, Balancer Connector, JST-XHR
- Applications: Specially Designed for 800MM Warbirds, EPP 3D plane, small heli, QAV180/210, DJI Phantom Quadcopter, DJI Phantom FC40 Spare, Walkera E22
- What you get: Gens ace LiPo Battery Pack with Deans Plug & Local after-sales service (located in Dublin, CA)
Features:
Specs:
Height | 0.74803 Inches |
Length | 3.85826 Inches |
Number of items | 1 |
Weight | 0.4188782978 Pounds |
Width | 0.98425 Inches |
Hm. That’s disappointing, but not shocking.
Is that a 3S 2200 mAh 25 C Gens Ace pack?
If so, it should be plenty powerful to run your pick of two Foamblast Valkyries or Krakens, or MTB Neo Rhinos. Foamblast, OutOfDarts, and Containment Crew are probably the largest US-based retailers of the motors, though you might be able to find smaller Etsy shops and what not that are more local.
I’d also recommend picking up a different Set of flywheels and cage; metal flywheels perform a bit worse than stock ones, and the canted cage is prone to whirlibirding darts. Kuryaka’s Daybreak wheels and Cage combo for $25 is a pretty great deal, and will hit 150 FPS with a 41 mm cage and Valkyries.
I used this one in a build almost just like yours.
https://www.amazon.com/gp/aw/d/B00WHCQYXG/ref=mp_s_a_1_2?ie=UTF8&qid=1521156038&sr=8-2&pi=AC_SX236_SY340_QL65&keywords=gens+ace+25c+3s+lipo&dpPl=1&dpID=5118RTKVUBL&ref=plSrch
I did just find this one too for roughly the same price, but better
https://www.amazon.com/gp/aw/d/B00WJN4LG0/ref=mp_s_a_1_1?ie=UTF8&qid=1521156183&sr=8-1-spons&pi=AC_SX236_SY340_QL65&keywords=gens+ace+25c+3s+lipo&psc=1
The thing is my project is going to be mobile, so I have to give it an external power source.
This is what I bought to power the whole thing, and I know I'm going to need some boot converters for this, as it looks like there's 4 pins I have to work with plugging in (like a red and 3 black) instead of two.
Yep. Gotta learn how to do that as well.
I need an 11.1v lipo that will fit in my crane stock, and I hear that the side tubes in those stocks only accommodate for 9.6v batteries, and that 11.1v nunchucks will stick out the butt plate. I found this lipo, its rc spec and should be the right size to fit in the space in between the two tubes in my crane stock. Can anyone offer advice? Thanks!: https://www.amazon.com/Gens-ace-Battery-2200mAh-Airplane/dp/B00WJN4LG0/ref=pd_lpo_vtph_21_bs_lp_t_2?_encoding=UTF8&psc=1&refRID=FPZ0KEZ1JZ9ETRYRB9X6
https://www.amazon.com/Turnigy-2200mAh-20C-Lipo-Pack/dp/B0072AEY5I/
Here's one for fairly cheap. From HobbyKing.
https://www.amazon.com/Gens-ace-Battery-2200mAh-Airplane/dp/B00WJN4LG0/
Here's a GenAce battery that works too.
Gens Ace
Tattu
https://www.amazon.com/Gens-ace-Battery-2200mAh-Airplane/dp/B00WJN4LG0/ref=sr_1_1?ie=UTF8&qid=1511932976&sr=8-1&keywords=11.1+volt+battery
or
https://hobbyking.com/en_us/turnigy-2200mah-3s-20c-lipo-pack.html?___store=en_us
Would 4 of these work? And can you explain the discharge? Do you mean once the battery reaches 80/100, I shouldn't drain it any further?