Reddit mentions of GoolRC Flysky FS-i6 AFHDS 2A 2.4GHz 6CH Radio System Transmitter for RC Helicopter Glider with FS-iA6 Receiver

This is the drone that I have built:

Been slowly building my first quad over the past month or so. Just when I have time. I bought a cheap carbon fiber kit off amazon. I will list everything I have bought so far.

Fly Sky FS-i6 Transmitter https://www.amazon.com/gp/product/B00VE3PZ3Y/ref=oh_aui_detailpage_o04_s01?ie=UTF8&psc=1

Fly Sky FSia6b RX (need this to run PPM instead of PWM): https://www.amazon.com/gp/product/B00VE3Q3XU/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

LHI quad Kit with ESC's, Motors and Flight Controller: https://www.amazon.com/gp/product/B010FMGUS8/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

Now the above kit comes with a CC3D flight controller, after some research, I decided that I would use a Naze32 rev6 board instead. I purchased that from Hobby king, I will list all hobbyking purchases after amazon.

Nylon hex nuts, screws and stand offs:
https://www.amazon.com/gp/product/B01EPLH08Y/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

XT60 connectors: https://www.amazon.com/gp/product/B01E9HM7NC/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

Lipo Voltage Checker: https://www.amazon.com/gp/product/B01E7UXVL8/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

Battery / GoPro straps: https://www.amazon.com/gp/product/B01F7MEDW6/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 PS: good velcro isnt enough!

Tri-blade Props. Buy a couple of these!:https://www.amazon.com/gp/product/B01CHDNRRK/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Extra arms....JUST IN CASE! https://www.amazon.com/LHI-Carbon-thick-250mm-Quadcopter/dp/B01715HGNU/ref=sr_1_1?ie=UTF8&qid=1472346179&sr=8-1&keywords=LHI+arms


These are all the hobby king stuff that I bought:
Naze 32 FC ACRO: http://www.hobbyking.com/hobbyking/store/__96841__AfroFlight_Naze32_Rev6_Flight_Controller_Acro_.html

1300 mah 3s 45-90c lipos: http://www.hobbyking.com/hobbyking/store/__18207__Turnigy_nano_tech_1300mAh_3S_45_90C_Lipo_Pack.html

Besides a lipo charger, the above will get you flying! Below is everything needed for the FPV aspect! I used to run RC cars so luckily I had a lipo charger from those days

Camera and transmitter from ebay: http://www.ebay.com/itm/262061528376?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Clover antennas from ebay: http://www.ebay.com/itm/272297376391?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Quanum Cyclops FPV Goggles from hobbyking: http://www.hobbyking.com/hobbyking/store/__104150__Quanum_Cyclops_FPV_Goggle_w_Integrated_Monitor_and_Receiver_AR_Warehouse_.html

Now this is prolly the most basic, beginners fpv setup that you can buy... Its perfect for learning and crashing lol. I have about 3 flights with mine so far, about 4 batteries. Buy props lol, lots of props. Already had to change 1 arm too.

The FS-T6 is kind of old, you're better off with the FS-i6 for the same price.

Someone else would have to comment about the FC; I haven't used KK2.1. You will need some way to get 5V to the flight controller (like a polulu 5V step down or matek PDB or something).

Also you'll need a power supply for the battery charger. And probably more batteries.

I like my flysky. They're the same as Turnigy I think? Remember that there's a huge difference between the FS-T6 and FS-i6, the i6 being newer with telemetry and stuff. link for Flysky

Also recommended are the OrangeRX and TX systems. Link to Orange TX

For a more budget option, I'd suggest the FlySky FS i6
https://www.amazon.com/GoolRC-2-4GHz-Transmitter-Helicopter-Receiver/dp/B00VE3PZ3Y
It is reliable, fairly high quality, and also has cheap ~ $10 USD receivers (fs ia6)

A newer model, the Taranis X7 is a well made, reliable radio, although more expensive. However, it's the best on the market right now for its price. Its very new, and might be hard to find, but it's ~ $105 price point is well worth it.
http://www.getfpv.com/frsky-taranis-q-x7-2-4ghz-16ch-transmitter-white.html

This is the FlySky one on Amazon for only 4 bucks more with free shipping.

I personally don't have very large hands and really enjoy mine. I have both the FS-i6 (which is the same as the tgy-i6) and the 9x and I always want to fly with the i6.

It has a solid build quality and can use PPM (only one cable from the rx to fc for less clutter) if you buy this Rx to use with it.

I personally think that the i6 is a really great radio. That being said however, it seems like everyone else likes the 9x, so you may just want to get that.

If you do happen to get the i6 and have some questions I would totally be willing to help out if I can! Cheers.

> I'm more then likely going to total it

With that attitude I would again go with a Hubsan/Syma to start. If you really want to dive in as cheap as possible there is tons of kits on Ebay/Amazon. I started with a kit I found on Ebay, now I am slowly upgrading everything. I now wish I picked all my parts instead, but if your itching to dive in then below is a list.

Prime Shipping - Kit, Battery, Remote, Charger. Still requires soldering iron, velcro, zip ties, heatshrink, double sided tape, allen keys, and a couple minor things.

One of the posts on this subreddit asked about transmitters, and a person replied that this was a good cheap option in terms of transmitters. https://www.amazon.com/GoolRC-Flysky-Transmitter-Helicopter-Receiver/dp/B00VE3PZ3Y. What do you think about this one? (By the way, he didn’t link this specific one, but he said that this transmitter was a good option)

Ah, thank you for clarifying

It's this one: GoolRC FS-i6 AFHDS 2A 2.4GHz 6CH Radio System Transmitter for RC Helicopter Glider with FS-iA6 Receiver https://www.amazon.com/dp/B00VE3PZ3Y/ref=cm_sw_r_taa_WKGOybBQJ7P6M

I saw that there are a few sim adaptors but it's kind of daunting not knowing which ones are good or junk