Reddit mentions of Hot Glue Gun,ccbetter upgraded version Mini Hot Melt Glue Gun with 30pcs Glue Sticks with glue gun removable Anti-hot cover for DIY Small Craft Projects and Home Quick Repairs Blue

We bought one for my daughter that was like this one

I think we paid $11.99 plus tax and it came with 50 glue sticks.

DIYing a hot glue gun is absurd.

The glue sticks are cheap. You can pick them up 30 of them at most stores like Walmart, or on Amazon for $5.00 or less. I used maybe 3 sticks while making the sword I talk about below.

I actually got this glue gun on Amazon for $9 and I really like i because it has a small tip, an on/off switch and it came with 30 sticks (https://www.amazon.com/ccbetter-Upgraded-Removable-Anti-hot-Flexible/dp/B01178RVI2/ref=pd_lpo_vtph_60_bs_t_1?_encoding=UTF8&psc=1&refRID=8C7YNR2TC2S6CP1WJ8C2)

​

I finished my 2nd attempt at pepp'ing a world of warcraft sword (http://www.papercraftsquare.com/a-full-size-world-of-warcraft-sword-papercraft-free-template-download.html) only this time I used hot glue instead of just plain white glue and it went much better, especially the difficult joints like where the hilt meets the sword.

I think it was similar to what you are facing where the hilt is. I would put just a drop or 2 of glue on the tab then stick it to the matching end. The glue dries in only a few seconds so it bonded well. Like I mentioned before, when I messed it up, I would put the tip of the glue gun on the joint to melt the glue the try again.

​

Hope this helps. If you have more questions, I am happy to help.

Another great place to ask pep questions are therpf.com. I am building a complete stormtrooper armor and this site has been an awesome resource for me.

BONUS TABLE

All of the above is assuming you have everything required for building your quad if not below is a table with everything i think is necessary for building a quad. All these links will be from amazon

Part Type | Part Name | Quantity | Total Cost | Reason | Link
---------|---------|----------|----------|---------|----------|
Soldering Station | Hakko FX888D-23BY Digital Soldering Station | 1 | $100 | When it comes to working with quads and electronics you really don't want to skimp on the thing that's putting it together. A good soldering station can change your entire experience when it comes to building quads. For this reason we go with a Hakko once bought you will not need anything else later on. | http://www.amazon.com/Hakko-FX888D-23BY-Digital-Soldering-FX-888D/dp/B00ANZRT4M/ref=sr_1_7?ie=UTF8&qid=1458237822&sr=8-7&keywords=soldering+station
Hot Glue Gun | CCbetter® Mini Hot Glue Gun | 1 | $15 | You will use this more than you think, everything from securing your camera, antennas, etc to adding extra insulation to your components to ensure nothing falls off or gets ripped off. | http://www.amazon.com/CCbetter%C2%AE-Temperature-Melting-Flexible-Projects/dp/B01178RVI2/ref=sr_1_3?ie=UTF8&qid=1458237957&sr=8-3&keywords=hot+glue+gun
Velcro | VELCRO Brand - Sticky Back | 1 | $11 | Sometimes you need things to only stick for a bit then take it off. Velcro is pretty much self explanatory keep your vtx in place among other things | http://www.amazon.com/VELCRO-Brand-Sticky-Back-Black/dp/B00006RSWT/ref=sr_1_sc_1?ie=UTF8&qid=1458238198&sr=8-1-spell&keywords=stick+yvelcro
Zip Ties | Heavy Duty Black Cable Ties | 1 | $11 | The corner stone of fpv IMO. These are keeping more quads flying than anything else. | http://www.amazon.com/Heavy-Black-Cable-Ties-120lbs/dp/B003Y61A10/ref=pd_sim_60_4?ie=UTF8&dpID=41r7oTe3IpL&dpSrc=sims&preST=_AC_UL160_SR160,160_&refRID=1G5GJ28Z3M8JBJDW67RV
Solder | Miniatronics Corp 1064004 Rosin Core Solder 60/40 4oz | 1 | $12 | You are always going to need solder and this as the flux mixed in meaning it will be a very easy to use solder. | http://www.amazon.com/Miniatronics-Corp-1064004-Rosin-Solder/dp/B0006O933K/ref=sr_1_7?s=hi&rps=1&ie=UTF8&qid=1458238393&sr=1-7&keywords=solder&refinements=p_85:2470955011
Velcro Straps | Reusable Dubbex Black Velcro Cable Ties | 1 | $13 | Can be used for pretty much anything like batterystrap, hold wires down etc. | http://www.amazon.com/dp/B01AW0BDNK?psc=1
Voltmeter | Blackcell DC 3.2-30V LED 0.56inch Panel Meter Digital Voltmeter | 1 | $7 | Eventually something is going to go wrong and you are going to have to ensure that your voltages are correct. You are going to need this to verify volt outputs and to figure out what they are when there is no documentation for what you are looking at | http://www.amazon.com/Blackcell-3-2-30V-0-56inch-Voltmeter-Two-wire/dp/B00ZZIXT8W/ref=sr_1_6?s=electronics&rps=1&ie=UTF8&qid=1458238663&sr=1-6&keywords=voltmeter&refinements=p_85:2470955011
Desolder Tool | LyonsBlue Desoldering Vacuum Pump | 1 | $9 | Very useful for cleaning up to much solder or removing solder from contact pads to redo. Simply heat up the solder and suck it out. | http://www.amazon.com/LyonsBlue-Desoldering-Vacuum-Solder-Removal/dp/B003FHYL7I/ref=sr_1_2?ie=UTF8&qid=1458238959&sr=8-2&keywords=desolder
TOTAL | FOR | ALL | $178 | |

Hey with all this craptastic fighting, why not use a hot glue gun to keep the VRM heatsinks down. Make sure you get the proper temperature glue, nothing is gonna melt that :)
https://www.amazon.com/gp/aw/d/B01178RVI2/ref=pd_aw_sim_sbs_201_1?ie=UTF8&psc=1&refRID=5CV37MFGRBJZN9K25H4Z

Could this be it ccbetter Upgraded Mini Hot Melt Glue Gun with 30pcs Glue Sticks,Removable Anti-hot Cover Glue Gun Kit with Flexible Trigger for DIY Small Craft Projects & Sealing and Quick Daily Repairs 20-watt,Blue https://www.amazon.com/dp/B01178RVI2/ref=cm_sw_r_cp_tai_Qd6WDbBSXJE6A