#2,409 in Sports & Outdoors
Use arrows to jump to the previous/next product
Reddit mentions of UTG 1PC Medium Profile Airgun Mount with Stop Pin, 1" Dia
Sentiment score: 2
Reddit mentions: 6
We found 6 Reddit mentions of UTG 1PC Medium Profile Airgun Mount with Stop Pin, 1" Dia. Here are the top ones.
or
- Precision Machined From Aircraft-grade Aluminum Alloy with Anodized Black Matte Finish
- Complete with Stop-Pin for Rock Solid Application
- Ring Base Designed with Locking Hex Screws to Tightly Fit on Mounts with Airgun/.22 Dovetail Dimensions
- Reversible Locking Plate to Fit Full Range of Airgun/.22 Rails
- The center portion distancing is 58mm
- The mount fits any standard dovetail base from 9-11mm.
- NOTE: For both holes to be lineup, use two piece scope mount. Integral style rings most likely will only able to line up with one receiver hole
Features:
Specs:
| Color | Black |
| Height | 1.69 Inches |
| Length | 5.12 Inches |
| Release date | October 2009 |
| Weight | 0.39 Pounds |
| Width | 1.89 Inches |
Posted on another comment but I will add it here:
If your looking for a low cost silver 22lr scope then either of these would be good choices:
https://www.amazon.com/BARSKA-4x32-Plinker-22-Riflescope-Silver/dp/B001JJCHXE
https://www.amazon.com/Simmons-TruPlex-Reticle-Rimfire-Riflescope/dp/B0000V2MQE/ref=pd_lpo_vtph_200_lp_t_3?_encoding=UTF8&psc=1&refRID=9VKD83GTM054YKVVH7E9
I would not use the supplied scope rings though for the dovetail mount that the Marlins have a "one piece" mount will grip it a lot better and not move on you. For example a lot of people use this UTG mount:
https://www.amazon.com/UTG-Medium-Profile-Airgun-Mount/dp/B002TUSJVQ/ref=sr_1_1?ie=UTF8&qid=1520903490&sr=8-1&keywords=utg+one+piece+scope+mount
Make sure to order the tube size and height you need for your particular scope / needs
Edit to add: Forgot one if you want variable power
https://www.amazon.com/Simmons-Truplex-Riflescope-3-9X32-Silver/dp/B000GU67VU/ref=pd_sbs_200_2?_encoding=UTF8&pd_rd_i=B000GU67VU&pd_rd_r=3M2Q0WZDMENFNMW8X9FW&pd_rd_w=oIWJF&pd_rd_wg=Cr1sG&psc=1&refRID=3M2Q0WZDMENFNMW8X9FW
https://www.amazon.ca/UTG-Airgun-Medium-Profile-Integral/dp/B002TUSJVQ/ref=sr_1_4?ie=UTF8&qid=1501042439&sr=8-4&keywords=airgun+scope+mount
This one. The one piece base gives more area to hang onto.
All interesting choices!
I have the Marlin 795 and I installed this cheapo mount for my glass:
https://www.amazon.ca/UTG-Airgun-Medium-Profile-Integral/dp/B002TUSJVQ/ref=sr_1_3?ie=UTF8&qid=1524225459&sr=8-3&keywords=utg+.22
Added a little blue loctite on the screws.
Thats normal with cheap scopes, not suited for airguns - they got destroyed VERY quickly.
This scope utg 3x9 have bigger chances to survive on whisper
plus 1 piece mount
yes.
save yourself the headache of rings, buy this:
https://www.amazon.ca/UTG-Airgun-Medium-Profile-Integral/dp/B002TUSJVQ/ref=sr_1_5?ie=UTF8&qid=1509544840&sr=8-5&keywords=utg+scope+mount
the dovetail on the marlin 795 is sorta shallow, I mounted my scope with the cheap rings it came with and after a couple hundred rounds it had slid back half an inch, ruining zero.
Switched to this mount, stayed solid for hundreds more rounds, survived a day of Mapleseed.
To mount it, just look on top of the receiver of your Marlin 795, you will see a sort of ridge or rail. That's an 11mm dovetail mount. Common on air rifles and .22's. Scope mounts slide on and you tighten the screws, similar to a picatinny rail, just without the slots, and narrower.
I had the exact same problem as you. The best thing to do is buy the UTG airgun mount ( https://www.amazon.com/gp/aw/d/B002TUSJVQ/ref=mp_s_a_1_2?ie=UTF8&qid=1501040671&sr=8-2&pi=AC_SX236_SY340_FMwebp_QL65&keywords=utg+airgun&dpPl=1&dpID=41MDJhdhg3L&ref=plSrch ). For some reason normal dovetail rings dont like to grip the 795 so they start to slide back after a while, as you mentioned. So you have to use one of these types of scope mounts that squeezes the entire dovetail, so that you have enough traction to hold the scope in place.