#136 in Tools & Home Improvement
Use arrows to jump to the previous/next product
Reddit mentions of VIVOSUN 4 Inch Air Carbon Filter Odor Control with Australia Virgin Charcoal for Inline Fan, Grow Tent Odor Scrubber, Pre-filter Included, Reversible Flange 4" x 14"
Sentiment score: 16
Reddit mentions: 25
We found 25 Reddit mentions of VIVOSUN 4 Inch Air Carbon Filter Odor Control with Australia Virgin Charcoal for Inline Fan, Grow Tent Odor Scrubber, Pre-filter Included, Reversible Flange 4" x 14". Here are the top ones.
Buying options
View on Amazon.comor
- Premium Australian Carbon: Made of Australian Virgin activated charcoal with high microporosity, the VIVOSUN air carbon filter is designed to trap gas molecules as well as maintain sufficient airflow in ventilation devices for hydroponic systems; The 1050+ RC 48 carbon captures 3 times more air contaminants than average thanks to optimal surface area per carbon particle
- Excellent Odor Control: The porous activated carbon helps eliminate some of the most undesirable, pungent smells and particulates for indoor grow tents, and hydroponics grow rooms, preventing the gaseous pollutants from invading your bathrooms, basements and kitchens; It also absorbs stinky smells from pets, smokes, cooking fumes, etc
- Detachable Pre-Filter Cloth: Equipped with a pre-filter cloth that blocks 99% of the particles to prevent the air carbon filter from being clogged and keep it clean; Recommended replacing the carbon filter every 4 months to ensure well-conditioned use and high-efficiency to eliminate odor
- Reversible Flange and Base: Comes with heavy-duty iron flanges that fit exactly right over the ducting; The positions of the iron flange and bottom can be exchanged to reverse the charcoal canister, allowing the filter’s main body to be flipped upside-down for an exhaustive smell filtration and a long service life
- Versatile Applications: It can be used in conjunction with a 4-inch inline duct fan as an intake or exhaust filter; Perfect for grow tents, grow rooms, basements, garages, kitchens, smoking areas, air-cooled lighting, lower-level floors of double / triple story houses, window to window ventilation applications, or anywhere without a roof / ceiling cavity
Features:
Specs:
Color | Silver |
Height | 14 Inches |
Length | 4 Inches |
Size | 1 Count (Pack of 1) |
Weight | 6.59 Pounds |
Width | 4 Inches |
Saved this comment from a fella in micro grocery to start my set up
These are suggestions - feel free to ask more questions if you need anything.
Read this guide - I wish I had had something like this when I started: http://homegrow-pro.com/quantum-board-build-grow-tent/ Read this guide too: http://homegrow-pro.com/the-3x3-grow-tent-setup/
Essentials
• Grow Tent: 3 ft x 3 ft x 6 ft is the size you'd probably want. This is the one I bought: https://www.amazon.ca/VIVOSUN-Hydroponic-Observation-Window-Growing/dp/B01DXYMKIO
• Light: https://www.alibaba.com/product-detail/Kingbrite-240W-samsung-lm301h-288v3-quantum_62120261175.html?spm=a2700.7803241.0.0.31d73e5fhFxf6a This light is a fantastic LED quantum board that is very easy to assemble - I got the 3000K one with the epistar
• Fabric Pots: Head to Amazon and grab yourself a 5-pack of 7 gallon fabric pots https://www.amazon.ca/VIVOSUN-Gallons-Thickened-Nonwoven-Handles/dp/B00TF9E9PY/
• Also get yourself a saucer (you can get this at any garden store) and a pot elevator for each pot (pot elevator example: http://amazon.ca/Gro-Pro-725675-Level-Elevator/dp/B01J37FHF8/)
• Soil: Get yourself a bail of Pro Mix HP with mycorrhizae (it's cheap, reliable, and hard to overwater) from Canadian Tire, Rona, any store really and get also a bag of earthworm castings. Cover the bottom of your fabric pot with the castings (2-3 inches deep) https://www.homehardware.ca/en/20l-organic-worm-castings/p/5025712
• Nutrients: Gaia Green Dry Amendments (All Purpose and Power Bloom) Mix the All Purpose in with your Pro-Mix HP and then top dress your "soil" every month, changing it to Power Bloom during flowering https://www.canadiangardensupply.com/gaia-green-all-purpose-4-4-4.html https://www.canadiangardensupply.com/gaia-green-power-bloom-2-8-4-power-bloom-2-8-4-2kg.html
• Ventilation: Get the AC Infinity Cloudline T4 - it's absolutely worth it. Then purchase a 4-inch carbon filter and 4 inch tubing from Amazon (branding doesn't matter for these two things) https://www.amazon.ca/AC-Infinity-CLOUDLINE-T4-Ventilation/dp/B06ZXWN3BG https://www.amazon.ca/AC-Infinity-Dual-Layer-Aluminium-Ventilation/dp/B071LHCFZ8 https://www.amazon.ca/VIVOSUN-Australia-Charcoal-Pre-filter-Included/dp/B01DXYMBU6
• Timer: You can go cheap on this, but also consider a smart timer (like a Wemo) https://www.amazon.ca/Insight-Switch-Enabled-Compatible-Amazon/dp/B00EOEDJ9W
• Seeds: Jahseeds.ca - Canadian breeder, amazing beans, amazing price! Go with feminized seeds for your first round. https://jahseeds.ca/shop?olsPage=t%2Ffeminized-seeds
Extra accessories
• Pruning shears (seperate ones for trimming live plants and ones for harvesting) https://www.amazon.ca/Pruning-Gardening-Straight-Stainless-Precision/dp/B076HL5JJM
• a lighter (for sanitizing)
• a set of tweezers, for planting your sprouted seed
• some garden gloves
• rope ratchets for your lights
• zips ties for protecting things
• binder clips (for low stress training)
• plant ties (soft rubber and wire kind)
• watering can
• two pairs of measuring spoons for dry amendments
• a clip on fan and rotating fan (for air circulation over and under the canopy)
• markers and a pack of tag plant markers for identifying plants
• soil moisture https://www.amazon.ca/Soil-Moisture-Sensor-Meter-Hydrometer/dp/B014MJ8J2U
• paper towels (for germination)
• Bucket Head Wet Dry Vacuum Powerhead Lid for 19 Litre (5 Gal.) Multi-Use Buckets great for gathering up the excess water and tipped soil) https://www.homedepot.ca/product/bucket-head-wet-dry-vacuum-powerhead-lid-for-19-litre-5-gal-multi-use-buckets/1000666690
• 3 five gallon buckets (1 for the buckethead vacuum and 2 for extra water reservoirs) and two lids
• 3 surge protector power bars
• Various AC power extension cables
• 1 trellis net (for ScrOG training)
• USB microscrope (used to check the trichomes at harvest - if you want you can also get an adapter so it plugs directly into your smartphone, as opposed to plugging it into a computer) https://www.amazon.ca/Jiusion-Magnification-Endoscope-Microscope-Compatible/dp/B06WD843ZM
• 62% Boveda packs for curing
• Mason jars for curing and storage
• hanging rack for drying (you can substitute this for a hanger and some plant ties)
• Duct tape
It's a little more expensive at the start, but this setup will pay for itself within two harvests. With this setup you can expect to yield between 8 to 12 oz every run, once you grow accustomed to the cycle.
Fellow canuck! Welcome!
These are suggestions - feel free to ask more questions if you need anything.
Read this guide - I wish I had had something like this when I started: http://homegrow-pro.com/quantum-board-build-grow-tent/ Read this guide too: http://homegrow-pro.com/the-3x3-grow-tent-setup/
Essentials
Extra accessories
It's a little more expensive at the start, but this setup will pay for itself within two harvests. With this setup you can expect to yield between 8 to 12 oz every run, once you grow accustomed to the cycle.
>decent results for $1000
>actually recommended 1500
LOL @ the current /r/microgrowery
I remember when this used to be pages of people growing with tube light T4s for seedlings and CFLs for cheap grows.
Either way you need a budget. Let's say $175 for fun.
Go to a hardware store and get the cheapest 10 pack of LED bulbs. Get a power strip and some adapters to build one of these with those LED bulbs. You can fit 8 bulbs on a good power strip, save 2 bulbs for replacements if you want. That's 80W of LED from the wall for like $15-$20.
Get a tent. Here's a 2x2x4 for $38.. A tent will be easier than building anything, especially for the price.
With that small of a tent, you won't need a 6" fan, but if you think you'll get a big tent some day you may want to consider one. Get a 4" inline fan. Here's one on Amazon for $45, that comes with a speed controller to turn down (make quieter).
If you can't have your whole house smelling, you need a quality carbon filter. Here's an ok filter for $36 that will match your fan. It should last you a grow or 2.
Lights - $20
Tent - $38
Fan - $45
Filter - $36
You're at $139..
For the last $36 you need to consider your plant's pot, soil, nutes, and other small misc like rope or clothespins for plant training. It's not much, but you're shooting for cheap as possible. You can see where adding funds really can help this way. Hope it's helpful!
https://www.amazon.com/gp/product/B01DXYMBU6/ref=ppx_yo_dt_b_asin_title_o02_s01?ie=UTF8&psc=1
​
It's a carbon filter
Container: Rubbermaid 20 gal Brute Bin
Lights: Kingbrite 60 W Quantum Board (if you want dimmable, ask for a dimmable driver like the HLG-60H-36B and a potentiometer)
Screws: You'll need lots of nuts, long screws, washers, and spacers to mount the board and PSU. First put the board on the lid and mark where to drill, then drill holes. Then put the power supply on the outside in the middle, mark and drill those hoses. Mount power supply and then flip lid over and mount the light, using long screws and nuts to hold it in place (the light should NOT touch the lid but be 1-2 inches from it, held in place by nuts). Drill small hole for power line, then connect. Finally, drill 3 inch hole for exhaust beside the light. You'll also need long screws with nuts to keep the fan and shrouds together. Be sure to use spaces anywhere the screw heads or nuts are touching the lid or the lights. For light spacers, I used rubber spaces between the nuts.
Cooling shrouds: 120mm Fan Duct Cooling Shroud to 4 Inch Vent Hose
90 degree 4 inch elbow for exhaust: 4 in. 90° Round Adjustable Elbow
4" to 3" reducer for exhaust: 4 in. to 3 in. Round Reducer
2x regular JB Weld to mount the reducer and 3 inch "trunk"
Fan: Delta AFB1212SHE-PWM 120mm x 38mm 4pin PWM+Tac Sensor Extreme Hi-speed 3700 RPM 151 CFM
Fan controller: Noctua NA-FC1 4-pin PWM Fan Controller
Fan power supply: LE Power Adapter, UL Listed, 3A, 120V AC to 12V DC Transformer, 36W Power Supply
Fan power supply adapter: CRJ Female DC Power Supply Plug to 12V Molex Power Adapter Cable
Fan molex adapter: Coolerguys Mini 3-4 pin Fan Adapter (Single)
2x ABS fan elbow (for "snout" intake): 3 in. ABS DWV 90-Degree Hub x Hub Long-Turn Elbow
Air filter for intake: 16.25 in. x 12.5 in. x 0.19 in. - 16.3 in. x .2 in. x 12.5 in. - CF300 Carbon Filter
Air filter (not pictured): VIVOSUN 4 Inch Air Carbon Filter Odor Control with Australia Virgin Charcoal for Inline Fan
Fan hose (not pictured): iPower GLDUCT4X8C 4 inch 8 feet Non-Insulated Flex Air Aluminum Foil
Watering device (not pictured): Janolia Automatic Irrigation Kit, Self Watering System, with Electronic Water Timer
Camera (not pictured): Wyze Cam 1080p HD Indoor Wireless Smart Home Camera with Night Vision (glue steel piece for magnetic base onto the upper side of the bin)
Notes: This design is very safe because it keeps all electronic components high in the bin. At the same time, using a battery powered watering system keeps you from requiring to ever open it. The lamp runs very cool. The PWM fan controller works well and keeping the air moving without using a lot of power (do NOT buy a cheap voltage modulator, I did first and it doesn't work nearly as well as the PWM controller). The Wyze cam is super cheap and lets you keep an eye on everything or make timelapses. Have fun growing your tomatoes!
VIVOSUN 4 Inch Air Carbon Filter Odor Control with Australia Virgin Charcoal for Inline Fan, Grow Tent Odor Scrubber, Pre-Filter Included, Reversible Flange 4" x 14" https://www.amazon.com/dp/B01DXYMBU6/ref=cm_sw_r_cp_api_i_LVqSDbXCFH66J
This was my first carbon filter and it worked well. 35 bucks.
tent
light comes with hangers... looks complicated to order from alibaba but its not... and 1week delivery. you can also order from HLG in usa or canada but its more expensive. or you could go with a 400w hps from amazon with vented hood, or a 315 cmh.
fan amazing fan (have the 6'' model)
timer with battery built in
filter
temp and humidity
fan
https://www.amazon.com/gp/aw/d/B01DXYMBU6/ref=ox_sc_act_image_1_1_1?smid=A2PQGFJXAT8J9K&psc=1
I have a duct fan blowing into a carbon filter. It does a great job keeping the smell down.
A charcoal filter works for indoor use. I printed this adapter on my ender 3:
https://www.thingiverse.com/thing:2877754
And I ran it through a filter with these things:
It works great for me, and I'm very sensitive to the resin fumes.
VIVOSUN 4 Inch Air Carbon Filter Odor Control with Australia Virgin Charcoal for Inline Fan, Pre-filter Included, Reversible Flange https://www.amazon.com/dp/B01DXYMBU6?ref=yo_pop_ma_swf
Would this carbon filter, VIVOSUN 4 Inch Air Carbon Filter Odor Control with Australia Virgin Charcoal for Inline Fan, Grow Tent Odor Scrubber, Pre-Filter Included, Reversible Flange 4" x 14" https://www.amazon.com/dp/B01DXYMBU6/ref=cm_sw_r_cp_apa_i_0C6RDbBJWSN4Q work with these fans? ELUTENG Dual 120mm USB Fan with 3 Speed Controller, 5V Ventilator Fan Rechargeable Compatible for Laptop Receiver DVR Playstation Xbox Desk Computer Cabinet Cooling https://www.amazon.com/dp/B071Y4MGFK/ref=cm_sw_r_cp_apa_i_ED6RDbSX70SX5
Hey! I bought a filter off amazon and it was garbage. I wrote a 1 stare review saying it didn’t remove the smell and the seller contacted me and agreed to give me a refund if I removed the review. Try writing a review and see what happens. If you happen to be in Canada I ordered https://www.amazon.ca/VIVOSUN-Australia-Charcoal-Pre-filter-Included/dp/B01DXYMBU6/ref=mp_s_a_1_1?ie=UTF8&qid=1542050922&sr=8-1-spons&pi=AC_SX236_SY340_QL65&keywords=carbon+filter&psc=1 and it actually works. I’ve tested it in flower and there was no smell. Hope this helps.
just want to chime in here, I was in the same boat as you. Starting out as just an experiment seeing if I could actually sprout a seed, turned into a dedicated project :p But I can tell you I didn't have any idea with like lights, tents, air filters etc. So first thing I bought was this LED , but a better option would be this Viparspectra (the one I bought though has been just fine) and just hung it in my closet with the plant, and that's it. veg'ed it for 4 weeks just like that with the light on a timer and my closet door closed. (get a little desk fan to to move some air over the leaves) Then I figured I'd switch to flower, and was kinda on the edge about investing in a tent and carbon filter. but every thread I read about smell, veterans would always say "It's gonna smell a lot!" So I bit the bullet and got a 2x2x4 tent and this carbon filter and fan . You can probably use your DIY carbon filter just fine. Anyway, long story short, I started to flower and literally two days later I walk into my house after work and the smell just hits me. And this is just one plant. So definitely invest in that stuff. But as for the PC fan, unfortunately it's not going to have enough static pressure to force air through a carbon filter. You don't have to go with the one I got, like brotha said the duct boosters will work too. If you have any question let me know cause I relate very well to your situation, except I've now been halfway through the process lol. pm me if you want
I setup some filtering for my smelly resin 3d printer and I tried a 120mm fan but it wasn't strong enough. Maybe my fan was weak. Then I used a 12v bilge blower that they use on boats with a variable speed control. This is great in terms of air movement but it's noisy. Apparently, this is a good inexpensive option if you want more air movement through your filter (I'm going to switch to one of these soon unless I figure out some way to insulate my bilge blower to make it quiet):
https://www.amazon.com/gp/product/B075SY5P1K/ref=ox_sc_act_title_1?smid=A3NP2ORRCG15VI&psc=1
They have multiple products -- I'm talking about the cheapest one at $26.79 at the moment (4" duct fan, 197 cfm). It would use the 4" dryer duct you mentioned (I'm using that too, works great).
I'm putting a splitter on my system to hook up to a booth/3d print handling/soldering station. I made mine out of foamcore/foam board from Dollar Tree. The portable option looks like and a plastic tub is a good idea too but I wanted something more permanent (have a small table to dedicate to it).
For the output part, if you totally want to get rid of anything, you could send it through one of these:
https://www.amazon.com/dp/B01DXYMBU6
I'm using a similar one (one I bought was a couple bucks less but went out of stock). It completely gets rid of the resin smell so I think it would work well for stinky paints. But for acrylic, I'm sure it's overkill but I'm going to be using it for exactly that too along with my other uses.
To be 100% clear, this is how my setup works:
To connect the dryer duct, I put some electrical tape around the surface I was connecting to and then used cheap zip ties (had to double them up) to hold the duct on. They have hose clamps too but they seem a bit overkill for our usage.
Alright taking into consideration the 12 plant limit here, my previous setup was too big for so few plants. So with some downsizing hopefully saves even more!
Tent - GROWNEER 48"x36"x72" Lodge Propagation Tent
Lights - HLG65 lm301b and red 660nm hydroponic grow light 4000K x 2
Kingbrite 240W samsung lm301h 288v3 quantum board X1
Fan - AC Infinity CLOUDLINE S4, Quiet 4” Inline Duct Fan with Speed Controller
PH Meter - Wellcows Digital PH Meter
PPM Meter - HM Digital TDS-EZ Water Quality TDS Tester
Carbon Filter - VIVOSUN 4 Inch Air Carbon Filter
Ducting - VIVOSUN 2-PACK 4 Inch 8 Feet Non-Insulated Flex Air Aluminum Ducting
Nutrients - MEGA Crop (2500g)
Botanicare CAL-MAG Plus Plant Supplement 2-0-0 Formula, 1 Quart
PH Control - General Hydroponics pH Control Kit
Soil - PREMIER HORTICULTURE 20380RG PRO-Mix HP High Porosity Grower Mix
Pots - Gardzen 10-Pack 1 Gallon Grow Bags x 2
Cloning Machine - CLONE KING 25
Total - 880.62 (includes shipping)
So with this setup ill keep 1 or 2 mother plants and then run the rest in SoG in 1 gallon pots. Using the 2 4000k lights for the mother plant and the cloning station and the 240w for the SoG area of the tent. Its a small setup but I think it'll work. Any idea what kinds of yeilds this could achieve? Any further input would be greatly appreciated.
If you aren’t planning on getting a bigger tent I would stick with a 4” exhaust and a 4”/6” carbon filter. Here’s the link for the fan and one for the filter . I use a bigger fan and filter personally, but that’s because I plan on getting a bigger tent after my third or fourth grow. Based on the dimensions of your tent this should be a solid setup for you even if you go up a bit in the future.
I ended up going with this fan and this filter hopefully their good enough for my 2x2 space
Shopping list;
AmazonBasics 6-Outlet Surge Protector Power Strip, 6-Foot Long Cord, 790 Joule - White https://www.amazon.ca/dp/B00TP1C1UC/ref=cm_sw_r_sms_apa_i_H4B1DbVABEKV0
VIVOSUN 4 inch Inline Duct Booster Fan 100 CFM, Extreme Low Noise & Extra Long 5.5' Grounded Power Cord https://www.amazon.ca/dp/B01C82SYZ0/ref=cm_sw_r_sms_apa_i_33B1DbZQFHVBT
VIVOSUN 4 Inch Air Carbon Filter Odor Control with Australia Virgin Charcoal for Inline Fan Pre-Filter Included https://www.amazon.ca/dp/B01DXYMBU6/ref=cm_sw_r_sms_apa_i_D3B1DbXZRD3RS
Hydrofarm TM01015D Dual Outlet Grounded Timer https://www.amazon.ca/dp/B001Q1FZWA/ref=cm_sw_r_sms_apa_i_.2B1Db0WE33FY
LED Lights Strip 5M 5050 SMD Waterproof 150LEDs RGB Color Changing Flexible LED Light Strip Kit https://www.amazon.ca/dp/B07B5Z2Y34/ref=cm_sw_r_sms_apa_i_H2B1Db47ZRW0K
COB LED Grow Light, Niello Full Spectrum Grow Lights for Indoor Plants, Higher Light-Gathering, Space Saving and Easy to Install, Professional Greenhouse Hydroponic Indoor Plants(150W) https://www.amazon.ca/dp/B07DJ5WZQD/ref=cm_sw_r_sms_apa_i_M0B1DbJMFAJ20
Not included; tin tape, duct tape, 2" curved pvc tubes x3, zip ties, hot glue, and the Rubbermaid wheeled bin + lid.
This is exactly what I'm planning to do. Do you have a filter that you would recommend? I'm considering this one.
Here is the filter. It all tucks nicely up top behind the lights.
And this is my first grow so no idea on what it will yield.
Set up was super easy, old port screws right off and you screw the new one right one and then slap on a filter and a fan (any carbon filter should do but here’s what I bought that works well)
VIVOSUN 4 Inch Air Carbon Filter... https://www.amazon.com/dp/B01DXYMBU6?ref=ppx_pop_mob_ap_share
VIVOHOME 4 Inch 195 CFM Plastic... https://www.amazon.com/dp/B078HFVTYX?ref=ppx_pop_mob_ap_share
And finally some ducting-
iPower GLDUCT4X8C 4 inch 8 feet Non-Insulated Aluminum Foil Vent with 2 Clamps, Ducting https://www.amazon.com/dp/B00EPE3XHY/ref=cm_sw_r_cp_api_i_CfrZCb6YXV1V7
This really works well for me. The smell otherwise is intolerable. Carbon filters are really amazing.
It should yeah. When I got my photon the whole house stank of resin. When I put https://www.amazon.ca/dp/B01DXYMBU6 with a fan on my photon the smell basically went away. It’s still faint in the printer room.
If the goal is to avoid the fumes, I'd say modify a carbon filter to vent the exhaust through. I've seen several, one going so far to use ducting to attach to a large carbon filter with a 4inch in line fan to draw air through. And then at that point it really won't matter where it is for the most part.
Something like this - amazon link
Along with the likes of this custom exhaust vent along with some standard ducting and a 4" inline fan.
I have two of these:
https://www.amazon.ca/VIVOSUN-Australia-Charcoal-Pre-filter-Included/dp/B01DXYMBU6/ref=sr_1_3?keywords=carbon+filter&qid=1565462105&s=gateway&sr=8-3
It's amazing how well they work... I've had guests over and they can't smell anything until I open the tents to let them have a peek.