Reddit mentions: The best metallurgy books
We found 25 Reddit comments discussing the best metallurgy books. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 15 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Metallurgy for the Non-Metallurgist, Second Edition(05306G)
- Used Book in Good Condition
Features:
Specs:
Height | 7.20471 Inches |
Length | 10.31494 Inches |
Weight | 2.30162601528 Pounds |
Width | 1.25984 Inches |
Number of items | 1 |
2. Locks, Safes and Security: An International Police Reference (2 volume set)
- Display: 17.3" Full HD eDP Non Reflection 1920x1080 | Operating System: Windows 10
- Processor: Intel Core i7-7700HQ (2.8-3.8GHz)
- Graphics Card: NVIDIA's GTX 1050 2G GDDR5
- RAM: 8GB DDR4 2400MHz | Hard Drive: 128GB SSD M.2 SATA + 1TB (SATA) 5400rpm
- Special features: Cooler Boost 4 | Steel Series Keyboard | Nahimic Audio Enhancer| Steel Series Single Color Red Backlight
- Audio Boost enhancing the headset sound detail and sound stage
Features:
Specs:
Height | 10 Inches |
Length | 7 Inches |
Weight | 7.5 Pounds |
Width | 3 Inches |
Number of items | 1 |
3. Extractive Metallurgy of Rare Earths
Specs:
Height | 9.21258 Inches |
Length | 6.14172 Inches |
Weight | 1.9510910187 Pounds |
Width | 1.1251946 Inches |
5. Introduction to Fatigue in Metals and Composites
Specs:
Height | 9.21 Inches |
Length | 6.14 Inches |
Weight | 2.9101018584 Pounds |
Width | 0.69 Inches |
Number of items | 1 |
6. Adhesive Bonding of Aluminum Alloys (Materials Engineering Series; V. 1 Irish Studies)
Used Book in Good Condition
Specs:
Height | 9.21 Inches |
Length | 6.14 Inches |
Weight | 1.89818007582 Pounds |
Width | 1.13 Inches |
Number of items | 1 |
7. Metalworking Sink or Swim: Tips and Tricks for Machinists, Welders and Fabricators (Volume 1)
- Used Book in Good Condition
Features:
Specs:
Height | 11 Inches |
Length | 8.5 Inches |
Weight | 2.16 Pounds |
Width | 0.6 Inches |
Number of items | 1 |
8. Applied Welding Engineering: Processes, Codes, and Standards
Specs:
Height | 9.02 Inches |
Length | 5.98 Inches |
Weight | 1.4991433816 Pounds |
Width | 1 Inches |
Release date | November 2015 |
Number of items | 1 |
9. Heat Treater's Guide: Practices and Procedures for Irons and Steels
Specs:
Height | 11.25 Inches |
Length | 8.75 Inches |
Weight | 1.1 Pounds |
Width | 2.25 Inches |
Number of items | 1 |
10. Welding Fabrication and Repair (Volume 1)
Used Book in Good Condition
Specs:
Height | 10 Inches |
Length | 7 Inches |
Weight | 1.35 Pounds |
Width | 0.65 Inches |
Number of items | 1 |
11. Welding Print Reading
- Used Book in Good Condition
Features:
Specs:
Height | 10.75 Inches |
Length | 9 Inches |
Weight | 2.0118063256548 Pounds |
Width | 1 Inches |
Number of items | 1 |
12. Metal Forming: Mechanics And Metallurgy
- Sucks flies in
- Flies cannot get back out
- battery powered
Features:
Specs:
Height | 10 Inches |
Length | 7 Inches |
Weight | 1.322773572 Pounds |
Width | 0.78 Inches |
Release date | March 2014 |
Number of items | 1 |
13. Metallurgy Fundamentals
Used Book in Good Condition
Specs:
Height | 10 Inches |
Length | 8 Inches |
Weight | 1.7 Pounds |
Width | 0.75 Inches |
Number of items | 1 |
14. The Gun Digest Book of Firearms Assembly/Disassembly Part V - Shotguns
Specs:
Release date | September 2002 |
15. Physical Metallurgy Principles
- BOSE COMPANION2 SERIES II SPEAKER SYSTEM
Features:
Specs:
Height | 9.25 Inches |
Length | 8 Inches |
Weight | 3.15040572398 Pounds |
Width | 1.25 Inches |
Number of items | 1 |
🎓 Reddit experts on metallurgy books
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where metallurgy books are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
The Mineralogical Society published a book called "Rare Earth Minerals: Chemistry, Origin, and Ore Deposits". I own it and like it, and it sounds closest to what you'd want. My only complaint is that, because each chapter is a paper by a different author, the book doesn't flow that well or build on concepts in a logical manner like most textbooks. However, its still loaded with useful information that any inspiring REE-geoscientist would want to have access to. I'm not sure a "textbook" style publication exists yet for the REE's. REE ore deposits are a very understudied field of ore deposits until recently. There is also "Extractive Metallurgy of the Rare Earths" (which I also own) which has a few great introduction chapters about rare earth chemistry, economics, and mining, but then in subsequent chapters jumps into really detailed metallurgical processes regarding the extraction and processing of rare earths that I am totally clueless on and have no interest in. I'd almost recommend it just for the first few chapters, but the book is pretty pricey.
Edit: Links: http://www.amazon.com/Rare-Earth-Minerals-Chemistry-Mineralogical/dp/0412610302 http://www.amazon.com/Extractive-Metallurgy-Rare-Earths-Gupta/dp/0415333407/ref=sr_1_1?s=books&ie=UTF8&qid=1332222202&sr=1-1
Edit: If you have any specific questions feel free to message me. I'm working on my masters studying REE ore deposits at the moment. I'm definitely not an expert on REE's (yet?), but I may be able to answer certain questions or forward them to someone who can.
Hertzberg is a great deformation and fracture book, definitely recommend owning this one.
Also, [Honeycombe and Bhadeshia] (http://www.amazon.com/gp/product/B000S1L6IQ/ref=pd_lpo_k2_dp_sr_1?pf_rd_p=1535523722&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=0750680849&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=1T4JXHZ7FKY6AGYPF3KH) have a great book on ferrous alloys. You should be able to find a pdf of this one, let me know if you can't.
As far as the others (online resources/organizations), I can't really comment... I just used these two textbooks in my grad-level fracture and ferrous alloys classes and quite enjoyed both books.
During my materials engineering BEng I found the following books to be quite useful as general reference and self learning for the first two years.
Askeland: http://www.amazon.com/Science-Engineering-Materials-Donald-Askeland/dp/0495296023/ref=sr_1_1?ie=UTF8&qid=1408623880&sr=8-1&keywords=askeland+materials
(I bought this book for only $1 second hand off of abebooks.com)
Callister: http://www.amazon.com/Materials-Science-Engineering-An-Introduction/dp/1118324579/ref=sr_1_1?ie=UTF8&qid=1408624073&sr=8-1&keywords=callister+materials
(Callister is very useful although lacks information on metallurgy since it is only an introduction book)
For metals and alloys I found these to be the most useful:
Reardon: http://www.amazon.com/Metallurgy-Non-Metallurgist-Second-Edition-05306G/dp/1615038213/ref=sr_1_2?ie=UTF8&qid=1408624192&sr=8-2&keywords=metallurgy
Polmear: http://www.amazon.com/Light-Alloys-Metallurgy-Material-Science/dp/0340491752/ref=sr_1_2?ie=UTF8&qid=1408624234&sr=8-2&keywords=polmear+light+alloys
I hope this helps
Here's a great book I like to recommend:
http://www.amazon.com/Metallurgy-Non-Metallurgist-Second-05306G-International/dp/1615038213
I'm sure there are cheaper places to find the book and you should check if maybe your library has it. It's kinda geared towards technical people who are non-metallurgists.
These books combined with the eBooks / resources in the stickied post will keep you busy for the next 10 years or so.
I'm also interested in books on these topics. Looking at some course catalogs from Georgia Tech, they have several graduate courses for these, which recommend these books:
Can anyone else recommend any of these or others? I have no doubt that what they're teaching is valid, given I've pulled them straight from a course catalog, but are the structured well and easy (enough) to read?
Metallurgy For The Non-Metallurgist is a good and informative book. It teaches a lot about the history of metallurgy as well. You can probably find a free pdf or cheaper used copy somewhere else though.
Off the top of my head I can tell you that there are different epoxies/epoxides and polyolefins on the market with different shear, tear, and crush strengths; and different ones are more specifically designed to outlast fatigue, vibration, cryogenic temperatures (aerospace market), and corrosion.
Here's a book on the topic if it interests you further:
>http://www.amazon.com/Adhesive-Bonding-Aluminum-Materials-Engineering/dp/0824774051
(it's a little old, but the basics are there and it's good information. Besides, adhesives were being used in planes as early as the 1940s so an engineering book from 1985 isn't too bad. For more modern information try contacting ALCOA, they know everything about aluminum.)
As unorthodox as it may seem, you can learn a lot from places where people discuss "hypothetical" criminal activities. Totse spinoff boards (see totse2, zoklet, rorta) have forums/archives for this purpose. Though take everything you learn there with a grain of salt, since most people on these are living in a fantasy world. You'd be surprised, however, how many problems have really simple solutions. Though while the methods would be very different at the level of international espionage, you learn that a lot of solutions can be found by combining critical thinking with common sense.
EDIT: You may also want to try and get a hold of a copy of Locks, Safes, and Security (Could be outdated, since the past 10 years have been good for science) it's over a thousand pages and it's an incredibly in depth reference for security systems and the like. I had some other good references somewhere but I can't seem to remember/find them. If I do I'll be sure to put them here.
applied welding engineering
Haven't gotten all the way through it but should have a good bit of what you're looking for.
Personally, I just got a textbook on materials engineering. That covers everything you're asking and more. Or just a steel or metals textbook.
Be warned that all of those will require college algebra and a good knowledge of physics, if not calculus as well.
Edit: this looks good
Check this book out. It has a ton of info on heat straightening. I love this book, a lot of decent fabrication tips in it.
The heat treaters guide should be a great reference for this.
amazon link
A good starting point for people without formal training can be Metallurgy for the Non-Metallurgist published by ASM International. Some public libraries even have this book.
If you provide a little more information about your background, we can point you in a more precise direction.
The gold standard of books on the subject is this one-
http://www.amazon.com/Locks-Safes-Security-International-Reference/dp/0398070792/ref=sr_1_1/105-3769004-8970845?ie=UTF8&s=books&qid=1186337821&sr=1-1
The author has also been known to visit DefCon. You might travel there to learn a bit from him. He taught a 12 year old how to pick a Medeco, one of the most secure locks in the world, in minutes.
These have served me well.
http://www.amazon.com/Welding-Print-Reading-John-Walker/dp/1590706420/ref=sr_1_1?ie=UTF8&qid=1405115134&sr=8-1&keywords=blueprint+reading+john+walker
http://www.amazon.com/Modern-Welding-Andrew-D-Althouse/dp/1566379873/ref=sr_1_2?ie=UTF8&qid=1405114998&sr=8-2&keywords=modern+welding
http://www.amazon.com/Welding-Metallurgy-Sindo-Kou/dp/0471434914/ref=sr_1_1?s=books&ie=UTF8&qid=1405115261&sr=1-1&keywords=welding+metallurgy
Welding Fabrication and Repair (Link)[http://www.amazon.com/Welding-Fabrication-Repair-Frank-Marlow/dp/0831131551] is a decent place to start.
It really depends on how much detail you want, and what kind of work you want to do. The details relevant to a structural fabricator may not be relevant to a pipe fitter or someone welding exotic alloys at a machine shop.
The AWS Welding Handbooks are a good source of information for all kinds of welding, but less so for all the work that surrounds it.
This is the textbook I used in a course during my Materials Engineering undergrad. It describes a lot of processes such as rolling, extruding, deep drawing, stamping, etc. I used the 2nd edition which is $15 used on Amazon.
http://www.amazon.com/Metal-Forming-Metallurgy-William-Hosford/dp/1107670969/
Tom Lipton's also got a couple of books that are a damn good read:
http://www.amazon.com/Metalworking-Sink-Swim-Machinists-Fabricators/dp/0831133627/ref=sr_1_2?ie=UTF8&qid=1404504767&sr=8-2&keywords=tom+lipton
http://www.amazon.com/Metalworking-Doing-Better-Tom-Lipton/dp/0831134763/ref=sr_1_1?ie=UTF8&qid=1404504767&sr=8-1&keywords=tom+lipton
This is what I am using right now in my metallurgy class. I would wait a bit though if you want to buy it since it's a college book. http://www.amazon.com/Metallurgy-Fundamentals-Daniel-A-Brandt/dp/1605250791
Here is the mobile version of your link
Youtube videos, and this book
Do you know if there' any difference between the normal edition and the international version: ?
I'm assuming one has such a high price because it's a college book
Locks, Safes and Security: An International Police Reference (2 volume set) https://www.amazon.com/dp/0398070792/ref=cm_sw_r_cp_api_eXW-zb5BDJHVY
Don’t steal things.