Reddit mentions: The best parallel port cards
We found 12 Reddit comments discussing the best parallel port cards. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 6 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Addonics M2 Storage Controller - Plug-in Card Components Other ADM2PX4
- Install M2 PCIe SSD into PCIe 4-lane slot
- Support dual-sided SSD module with 1.5 mm component height on the top and bottom side
- Support PCIe 1.0, 2.0 or 3.0 slot
- Installable in standard height or low profile system
- Replace any SATA hard drive in desktop or server equipment with a low power and shock resistant M2 PCIe SSD
Features:
Specs:
Height | 2 Inches |
Length | 6.25 Inches |
Number of items | 0 |
Weight | 0.3 Pounds |
Width | 6.25 Inches |
2. StarTech.com 1 Port PCI Parallel Adapter Card - Parallel adapter - PCI - IEEE 1284 - PCI1PECP
- Add a high-speed parallel port (EPP/ECP) to your desktop computer through a PCI expansion slot
- PCI Parallel Card
- IEEE 1284 Card
- Parallel Adapter -PCI DB25 Card
- EPP / ECP / SPP / BPP Parallel Adapter Card
Features:
Specs:
Color | One Color |
Height | 5.31 Inches |
Length | 5.98 Inches |
Number of items | 1 |
Size | One Size |
Weight | 0.11904962148 Pounds |
Width | 0.94 Inches |
3. PCI-E PCI Express x16 to x16 90 Degree Right Angle Riser Card for 1U 2U PC
Specs:
Weight | 0.220462262 Pounds |
4. StarTech.com 1 Port PCI Express Dual Profile Parallel Adapter Card - SPP/EPP/ECP - 1x DB25 IEEE 1284 PCIe Parallel Card (PEX1P)
- NEW MODEL NOW AVAILABLE: PEX1P2; Add a parallel port to your desktop computer through a PCI Express slot; features both standard and half-height mounting brackets
- NEW MODEL NOW AVAILABLE: PEX1P2; Add a parallel port to your desktop computer through a PCI Express slot; features both standard and half-height mounting brackets
- NEW MODEL NOW AVAILABLE: PEX1P2; Add a parallel port to your desktop computer through a PCI Express slot; features both standard and half-height mounting brackets
- NEW MODEL NOW AVAILABLE: PEX1P2; Add a parallel port to your desktop computer through a PCI Express slot; features both standard and half-height mounting brackets
- NEW MODEL NOW AVAILABLE: PEX1P2; Add a parallel port to your desktop computer through a PCI Express slot; features both standard and half-height mounting brackets
- The PEX1P PCIe Parallel Adapter card can be installed in a PCI Express (PCIe) slot, allowing you to connect EPP/ECP parallel peripherals to any computer system via the native single-chip design (Oxford OXPCIe952)
- SPP/EPP/ECP parallel card adds one DB25 parallel port, perfect for connecting printers, scanners, CD-R/RW drives, memory card readers, bar code scanners and more.
Features:
Specs:
Height | 4.7 Inches |
Length | 0.8 Inches |
Number of items | 1 |
Release date | March 2020 |
Weight | 0.14375 Pounds |
Width | 4.3 Inches |
5. NetMos 1 Port Single [Parallel] Port PCI 32-bit Card [1P]
- A perfect accessory for your computer.
- Durable
- High quality
Features:
Specs:
Weight | 1 Pounds |
6. ASUS ThunderboltEX II Components
- Thunderbolt 2 Technology - 2X Faster than original Thunderbolt and 4X faster than USB3.0. Daisy-chain up to 9 devices per port with improved transferring speed up to 20 Gb/s.
- Simply Plug and Upgrade! - Compatible with all the Thunderbolt devices
- Easy Installation - Exclusively Compatible with ASUS 8 series MBs
- Only supported on these motherboards: ROG MAXIMUS VI EXTREME, TUF SABERTOOTH Z87, ASUS Z87-PRO, ASUS Z87-PRO (V EDITION, ASUS Z87-PLUS, ASUS Z87-PLUS (VivoMouse EDITION), ASUS Z87-A, ASUS Z87-A (NFC EXPRESS EDITION)
Features:
Specs:
Height | 1.54 Inches |
Length | 8.98 Inches |
Weight | 0.47 Pounds |
Width | 5.98 Inches |
🎓 Reddit experts on parallel port cards
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where parallel port cards are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Thank you again!!! So I found this http://www.amazon.com/Addonics-ADM2PX4-Pcie-4-lane-Adapter/dp/B00KDM75XK
And it seems to get the 950 pro to 2kmbps read speeds according to the reviews so I suppose I'll order it. Does it look alright?
Thank you again :)
I would first recommend getting a internal Parallel card like this one, if you have an available slot. Windows 7 recognizes Parallel ports just fine in my experience (for printing) but USB to Parallel is perhaps too different from built-in Parallel ports or internal Parallel ports.
If that option doesn't work look for a computer which already has a built-in Parallel port and maybe install Windows 7 on it. Or if that doens't work try XP.
Nice print.
Couple of things to think about for the next gen.
STOP USING COUNTERSINK SCREWS!!! you need literally any other type of screw, if you use standard case screws all you need to do is make the hole the right size and it will tap itself. Countersink screws will split your board apart if you're not really careful, and the care doesn't stop when you stop using the screwdriver, because every time you touch the board you're altering the stress on these points.
Although it looks cool, that graphics card is very dangerously exposed, the card probably uses parts that have a 1.8v maximum voltage on the parts right next to 12v inputs from the power supply, any stray bits of metal like a dropped paperclip or pinged hairband will land cleanly on the shelf you've exposed and you could very easily kill your card and perhaps your whole system. The rest of the system also suffers from this as it seems to only be IP1x rather than the IP3x that you'll get from a commercial case, but the motherboard isn't so at risk because of its orientation. If you could flip the whole lot upside down it would help, but this https://www.amazon.co.uk/Express-Degree-Right-Angle-Riser/dp/B01ASPS8PK would just relocate the card so it was vertical and the most vulnerable parts would be facing the motherboard.
The PCIe port isn't really designed to support something like a graphics card, you'll want to design in somthing to support it that cant be knocked.
The parallel port is on my actual machine, but it's one of these.
You might have a point though... I also own a GB Transferer 2 and for literally every game I get errors with that too. I swear it USED to work... but I used that in a VM as well.
I'll see if I can borrow one of our old Dells from work, they came with Windows XP but I'm sure I can stick 98SE on there easily to use the GameShark software.
The reason I didn't think anything was wrong with the .gbs files though, is that I googled around and found somebody's post mentioning a similar problem - he uploaded a .zip and all but one were that same 56KB size as mine. So I think that's just how the GBC GameShark does it, and since VBA is, well a GBA emulator, they probably coded it for GBA snapshots.
Do you have a desktop you could temporarily install some hardware in?
https://www.amazon.ca/PCIE-SSD-3-0-4-LANE-ADAPTER/dp/B00KDM75XK
You could use that, as it does support a 4-lane NVMe card. Then access and copy files off of it onto something else.
And something like this?
https://www.amazon.ca/PCIE-SSD-3-0-4-LANE-ADAPTER/dp/B00KDM75XK
It could be that your onboard parallel port doesn't like being a "real" parallel port.
Some modern motherboards have "Lite" versions of parallel ports, which, while enough to run printers without complaint, don't work properly for machine control. It's stupid and annoying, but they're cutting costs while still supporting what 99.9% of the average userbase would use it for.
A quick search shows that people are having good luck with Netmos Cards, but your mileage may vary. Have a look around for known working model numbers, and give one of those a whirl. That sucker is $15 shipped, so it's not a big investment overall
Also, what was the configuration of your old computer? Machine control doesn't require a whole lot of oomph, and a good number of people run their machines on decade old P4 machines without a hitch. Seems a bit fishy that you'd be having that sort of problem.
> ASUS ThunderboltEX II
http://www.asus.com/Motherboards/ThunderboltEX_II/
Z-97A is fully compatible with it.
http://www.amazon.com/Asus-ThunderboltEX-II-ASUS-Components/dp/B00ISKS45M
It seems I'll need to buy an adapter..
Found this that should do the job:
https://www.amazon.ca/PCIE-SSD-3-0-4-LANE-ADAPTER/dp/B00KDM75XK
I think you mean this
Review by tweaktown