Reddit mentions: The best pipe heat cables
We found 22 Reddit comments discussing the best pipe heat cables. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 17 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Easy Heat AHB-019 Cold Weather Valve and Pipe Heating Cable, 9 feet
- Heat cable
- Tough PVC inner insulation
- 63 watts
- 120 volts AC
- 9-feet heated section
Features:
Specs:
Height | 0.12 Inches |
Length | 108 Inches |
Number of items | 1 |
Size | 9-Feet |
Weight | 0.21 Pounds |
Width | 0.12 Inches |
2. HEATIT JHSF 9-feet 120V Self Regulating assembled Pipe Cable
JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment. HEATIT is registered Trademark by zhukeshi(We didn't authorize other sellers in Amazon.com).Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewe...
Specs:
Color | Black |
Height | 2 Inches |
Length | 20 Inches |
Number of items | 1 |
Size | 9-feet |
Weight | 0.49 Pounds |
Width | 4 Inches |
3. HEATIT HISD 24-feet Pipe Heating Cable with Built-in Thermostat
Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two-year limited quality . If you are not completely satisfied with HEATIT heating cable, please don't hesitate to contact our customer s...
Specs:
Color | Black |
Size | 24-feet |
Weight | 0.89 Pounds |
4. Frost King, Black HC24A Automatic Electric Heat Cable Kits, 24ft x 120V x 7 Watts/ft, 24 Feet
24Ft x 120V x 7W/ft.Keeps water flowing down to (-40) degrees FFor metal and plastic water pipesEasy to install
Specs:
Color | Black |
Height | 1.25 Inches |
Length | 10.5 Inches |
Number of items | 1 |
Size | 24 Feet |
Weight | 1.3 Pounds |
Width | 9.25 Inches |
5. HEATIT HISD 15-feet Pipe Heating Cable with Built-in Thermostat
Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two-year limited quality . If you are not completely satisfied with HEATIT heating cable, please don't hesitate to contact our customer s...
Specs:
Color | Black |
Size | 15-feet |
6. HEATIT HISD 30-feet Pipe Heating Cable with Built-in Thermostat
Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two-year limited quality . If you are not completely satisfied with HEATIT heating cable, please don't hesitate to contact our customer s...
Specs:
Color | Black |
Size | 30-feet |
Weight | 1.06 Pounds |
7. Easy Heat AHB-013 Cold Weather Valve and Pipe Heating Cable, 3-Feet,black
- Manufactured in china
- Easy to use
- Highly durable
- Easy Heat pipe heating cable installs quickly and easily to keep water flowing down to -40° F (-40° C)
- Prevents pipe freeze-ups
- Includes heating cable, grounded plug, built in thermostat and instructions
- Designed for rigid plastic and metal pipes up to 1.5” (38mm) in diameter
- Built-in thermostat saves energy by powering the cable only when needed
- Turns on below 38° F (3° C) and off above 45° F (7 ° C)
- Plug indicator light assures the system has power
- Plugs into a standard 120 VAC outlet
- Constructed of weather resistant PVC outer jacket, continuous ground braid and polyethylene inner insulation
- UL listed and CSA certified
Features:
Specs:
Color | Black |
Height | 2 Inches |
Length | 8 Inches |
Number of items | 1 |
Size | 3-Feet |
Weight | 0.5 Pounds |
Width | 8 Inches |
8. M-D Building Products 4325 M-D 0 Pipe Heating Cable, 6 Ft L
This item is a M-D Building Products 4325 6-Foot Pipe Heating Cable with ThermostatPurpose of use for Rough Plumbing, pipe-heat-cablesThis product is manufactured in ChinaPrevents frozen water pipes to -50 Degree FahrenheitEasy to install just "wrap around" applicationSensor light shows thermostat i...
Specs:
Height | 8.75 Inches |
Length | 8.25 Inches |
Number of items | 1 |
Size | 6 ft |
Weight | 0.59 Pounds |
Width | 4.75 Inches |
9. HEATIT JHSF1-CT Self Reglating Pre-asembled Pipe Heting Cable 6-feet 120V
- Suitable for use on plastic and metal water pipes( including inlet pipe, drain pipe, sewer, palm tree frost protection, etc). Industrial grade self-regulating heating cable. The cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about the overheating risk. More Safe. Can be used by straight, spiral and overlap. More functional.
- Fluoropolymer (One of the most heavy-duty plastic material) as the out jacket. Can be used underwater application. Please keep the connection (waterproof IP65) between the orange cold lead and black heating cable above the water. The black heating cable including end seal meets waterproof IP68. JHSF1-CT cables are configured for use in nonhazardous and hazardous locations, including areas where corrosives may be present.
- Protect pipes up to 2 1/2" in diameter. For better freeze protection, at least 1/2 inch thick or thicker insulation material is recommended, especially for extremely cold weather. If the ambient temperature is lower than -20°F(-29°C), please use 1" thick insulation material. Pre-assembled, Including grounded plug with light, easy to install and use without built in thermostat. 120 volt, 5 watts/ft at 50 degrees F for pipe freeze protection.
- Roof deicing application: Can be used on flat roofs, metal roofs, asphalt roofs, rubber roofs, slate roofs, stone roofs, metal roofs, ceramic roofs, composite (tar and gravel) roofs and so on. Rated 6W/ft at 32°F (0°C) for roof deicing. For roof deicing applications, you may need to buy clips and hangers separately.
- Testing the cable before the installation. Uncoil the cable, plug in the heating cable Normally you can feel the slight warm on the heating cable in few minutes.
Features:
Specs:
Color | Black |
Height | 2 Inches |
Length | 45 Inches |
Number of items | 1 |
Size | 6 Feet |
Width | 1 Inches |
10. Easy Heat AHB-130 Cold Weather Valve and Pipe Heating Cable, 30-Feet
- Manufactured in china
- Easy to use
- Highly durable
- Easy Heat pipe heating cable installs quickly and easily to keep water flowing
- Includes grounded plug, built in thermostat, and instructions
- Each cable consists of tough PVC inner insulation, a continuous ground braid, and weather-resistant PVC outer jacket
- AHB units are activated and de-activated by an integral energy-saving thermostat
- Approved for rigid plastic and metal pipe; UL listed
- Easy Heat pipe heating cable installs quickly and easily to keep water flowing
- Includes grounded plug, built in thermostat, and instructions
- Each cable consists of tough PVC inner insulation, a continuous ground braid, and weather-resistant PVC outer jacket
- AHB units are activated and de-activated by an integral energy-saving thermostat
- Approved for rigid plastic and metal pipe; UL listed
Features:
Specs:
Height | 10.8 Inches |
Length | 1.3 Inches |
Number of items | 1 |
Size | 30-Feet |
Weight | 1.7 Pounds |
Width | 9.3 Inches |
11. HEATIT HISD Pipe Heating Cable Built-in Thermostat, 40-feet, Black
Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don't hesitate to contact our customer s...
Specs:
Color | Black |
Height | 22 Inches |
Length | 6 Inches |
Number of items | 1 |
Size | 40-feet |
Width | 21 Inches |
12. HEATIT JHSF 18-feet 120V Self Regulting Pre-assembled Pipe Cable
- JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment.
- Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable.
- Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off) and instructions. 120 volt, 3 watts/ft at 50 degrees F. Protect pipes up to 2" in diameter. Can be used by straight, spiral and overlap.
- ETL approved. 2 ft 18/3 cold lead with plug. The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65.
- Testing the cable before the installation. Uncoil the cable, plug in the heating cable. Normally you can feel the slight warm on the heating cable in few minutes.
Features:
Specs:
Color | Black |
Height | 3 Inches |
Length | 21 Inches |
Number of items | 1 |
Size | 18-feet |
Weight | 0.77 pounds |
Width | 4 Inches |
13. Frost King HC30A Heating Cables, 30 Feet, Black
- For metal and plastic residential water pipes
- Keeps water flowing down to (-40) degrees F
- For use on 2 in. metal and plastic water pipes.
- Easy to install
- 120V, 7 Watts per foot.
Features:
Specs:
Color | Black |
Height | 1.5 Inches |
Length | 9.5 Inches |
Number of items | 1 |
Size | 30' |
Weight | 1.5 Pounds |
Width | 8.5 Inches |
14. Frost King HC3A Automatic Electric Heat Cable Kits, 3ft x 120V x 7 Watts/ft, 3 Feet, Black
3Ft x 120V x 7W/ftKeeps water flowing down to (-40) degrees FFor metal and plastic water pipesEasy to install
Specs:
Color | Black |
Height | 1.25 Inches |
Length | 8.75 Inches |
Number of items | 1 |
Size | 3 Feet |
Weight | 0.515625 Pounds |
Width | 7.5 Inches |
15. Easy Heat AHB-016 Cold Weather Valve and Pipe Heating Cable, 6-Feet
- Manufactured in china
- Easy to use
- Highly durable
- Easy Heat pipe heating cable installs quickly and easily to keep water flowing
- Includes grounded plug, built in thermostat, and instructions
- Each cable consists of tough PVC inner insulation, a continuous ground braid, and weather-resistant PVC outer jacket
- AHB units are activated and de-activated by an integral energy-saving thermostat
- Approved for rigid plastic and metal pipe; UL listed
- Easy Heat pipe heating cable installs quickly and easily to keep water flowing
- Includes grounded plug, built in thermostat, and instructions
- Each cable consists of tough PVC inner insulation, a continuous ground braid, and weather-resistant PVC outer jacket
- AHB units are activated and de-activated by an integral energy-saving thermostat
- Approved for rigid plastic and metal pipe; UL listed
Features:
Specs:
Height | 2 Inches |
Length | 8 Inches |
Number of items | 1 |
Size | 6-Feet |
Weight | 0.65 Pounds |
Width | 8 Inches |
16. HEATIT JHSF 6-feet 120V Self Regulating ssembled Pipe Cable
JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment. HEATIT is registered Trademark by zhukeshi(We didn't authorize other sellers in Amazon.com).Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewe...
Specs:
Color | Black |
Height | 2 Inches |
Length | 20 Inches |
Number of items | 1 |
Size | 6-feet |
Weight | 0.49 Pounds |
Width | 4 Inches |
🎓 Reddit experts on pipe heat cables
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where pipe heat cables are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
When I was in Colorado last winter (where we had a storm that brought some days with a HIGH of 15, and a low of -25) I used:
Fresh water line
Heat tape
Self-adhesive water pipe insulation
40* Auto-on electric doodad with three outlets.
Water Bay
Inexpensive Hanging Trouble Light
Generous supply of lightbulbs.
Tanks
This is harder. They do make heated tank pads, but unless you're invested long-term in your current RV, AND in staying in colder climates? Enh.
The best inexpensive solution I've seen is one that you can take advantage of right now, if you can find them in the store still - probably on clearance.
See if you can find a couple long strings of incandescent C7 or C9-style christmas lights. Plug 'em in on a timer or another thermocouple outlet and arrange them on the ground underneath where your tanks are. Once you put up the foam board, the heat from the lights should keep the underbelly above freezing...
Would it be silly to hook up a 100 watt solar panel to some heat tape?
The idea is to make the panel that I'd only use in the summer pay in the winter by pre-heating the water going into my hot water heater a couple degrees, as a way to cheaply and easily make the solar panel work for me when I'm not otherwise using it.
https://www.amazon.com/dp/B07331JKPR/ref=sspa_dk_detail_1?psc=1
I'm assuming it's pretty much just a resistor so it shouldn't mind ac/dc or voltage that much. I wonder about the thermostat though, and I'd rather have it cut closer to 120F, although I doubt it'd get there, I'd also not want to burn the place down or have a steam explosion. On that one it's on at 37, which is about what my water comes in at, and off at 50 which I wouldn't think I'd ever get.
Does a solar panel care if the load is just a big resistor?
If the tape is 7.5 watts a foot on 120volt ac, how much would I want for a 100 watt panel? Would I want the controller if I have it anyway?
The margins are pretty thin. Assuming in winter the 100 watt panel give 50 watts 8 hours a day offsetting .4kwh per day, or about a nickel, which means the $24 heat tape is paid back in 480 days assuming the panel is free because for it's other purpose.
Obviously it is a little late now, but with these backflow preventers, you will want to "winterize" them in the fall/winter. Each model is different, but with mine, I remove all the internals and drain what water I can in there. After that, I use heat tape (http://www.amazon.com/Easy-Heat-AHB-019-Weather-Heating/dp/B00002N6MB/ref=sr_1_2?ie=UTF8&qid=1397143706&sr=8-2&keywords=heat+tape) and wrap the pipes with it. The manufacturer suggests blowing all the water out of the lines with an air compressor, but I have never done it. I keep it covered with an trash can (it's in the side yard not visible to anyone who isn't going over to that side for a reason), but you can also use one of those fake rocks (http://www.amazon.com/Orbit-Watermaster-53016-Granite-Sprinkler/dp/B0013I2MSG/ref=sr_1_1?ie=UTF8&qid=1397143834&sr=8-1&keywords=fake+rock).
Anyways, for your current issue, I would google the model # and look for repair kits. For my model, you can buy that plastic cap and the internals. Replacing it was a breeze, but it may be different for your model.
I know many lawn / sprinkler service companies would love to have the privilege to come winterize your system and then prepare it in the spring, but it isn't an awful task at all.
Good luck..
I made a bad microsoft paint diagram of my situation. I need to make a laundry room in my garage. Door with a swing leads to the back yard, the door with poorly drawn stairs to the house. Ive been researching ideas and came up with this. Would it be easier to pipe all the gas and water up to the ceiling with insulation and pipe heating cable to the storage room then just something like this
https://www.amazon.com/Lasko-5624-Profile-Silent-Heater/dp/B002Q4EYEQ/ref=sr_1_14?ie=UTF8&qid=1520041893&sr=8-14&keywords=electric+baseboard+heater
https://www.amazon.com/Heat-24-feet-Heating-Cable-Thermostat/dp/B01GZJJ96A/ref=sr_1_1?s=hi&ie=UTF8&qid=1521139049&sr=1-1&keywords=pipe+heat+cord&dpID=41zjwIbQ3LL&preST=_SY300_QL70_&dpSrc=srch
in the storage room set to 37 or is there a better solution Anyone can think of?
There is a gas line already on this wall, but no gas goes on with the valve so ill have to figure that out, and the kitchen is on the other side so i can tap into hot water and drill through the wall.
Thanks for any help.
You could wrap your pipes (or lag your pipes), or string some heat tape around them for when it's really cold out.
http://www.amazon.com/dp/B000BPG5XA?psc=1
Are they heat or just water? Is it the whole underside of the house?
I think with the unheated nature and the concrete you should be careful with the moisture issue. But like busstopvip says foam board might be best. You can cut and tape it easily. I don't know how you'd put fiberglass up on concrete unless you put some beams up which would be maybe a bit more work then is necessary.
Or maybe switch them to PEX?
Bi-fold or accordion doors would work fine. At low temperatures all you need to do is keep the slightly warmer air from floating away. You cannot punch a hole through the wall for warm air without putting in a fire damper, the wall between the house and garage is supposed to be fire rated. I'd suggest a little electric heater like this one. It's lowest set point is 39 degrees and in a confined space like that little closet it would hardly run at all. Just locate it near one of the sides of the washer and it will never freeze. You could also do heat trace on your water pipe and wrap a couple coils underneith the washer and secure it to the bottom.
Dont forget to vent the dryer to the outside as well.
I wrapped mine with "heat tape", it's just a cable that you plug into an outlet and it sips current to warm up to 50 degrees Fahrenheit whenever the temp dips below that. Something like this:
https://www.amazon.com/HEATIT-30-feet-Heating-Built-Thermostat/dp/B01GZJJAQO/ref=mp_s_a_1_4?keywords=heat+cable&qid=1572186438&sr=8-4
I also used the cardboard box that it shipped in to put over the barrel. So barrel -> heat cable -> box. A better approach would be to build a wooden box of sorts, indoors or on a side yard.
My town dips below zero some nights, most winter days are above freezing for the daytime high. So maybe more insulation if you're in a colder place.
Antifreeze in non potable lines/pipes. If you are docked and have AC electric service use heat tape. http://www.amazon.com/Easy-Heat-AHB-019-Weather-Heating/dp/B00002N6MB Also an incandescent light bulb of a decent wattage in the compartments where the lines are will most likely work. Heating a water tank is pretty easy. Remember you need to keep it a few degrees above freezing and it doesn't need to be hot. I've thought about using a few scraps of heat mat that is used under tile floors and throwing it on a tank.
A search on Amazon turned up one result
This should do the job for you easily.
I spent some time in a mobile home where the plumbing is not well insulated. The pipes, especially the outdoor faucets, are susceptible to freezing unless additional measures are taken. We would cover the outdoor faucets with a foam cover for insulation, and use heat tape. The latter plugs into an electric outlet and has a thermostat to know when it needs to turn on to heat the pipe and keep it from freezing.
Those two items would provide decent protection at a reasonable price, but it wouldn't cost a ton to have a plumber replace the outside faucet with a length of pipe going into the basement where the shutoff valve would be more easily accessible. This is your permanent solution...
Is there a way you could use a cable pipe heater like this? You can also use a livestock trough heater to maintain an open area of water so the fish can breathe. Placing the heater near the intake for the waterfalls might be enough to keep them going. (Just get a pipe heater soon before they’re sold out.)
Grab some insulation and warp that around the whole thing if it gets really cold. Make sure your heat tape is self regulating type when insulating however to prevent it from overheating.
After reading a lot of reviews where people had issues with the hoses, and going through about 2 hoses a year on average myself, I opted to just get the heatstrip and build my own (and it seems that a lot of other RVers do as well).
I bought one of [these] (https://www.amazon.com/Easy-Heat-AHB-019-Weather-Heating/dp/B0000DGAJS?th=1), attached it to the hose with some duct tape, and then wrapped the entire thing in pipe insulation. Be sure to get insulation that's a bit larger than the diameter of the hose, to leave room for the heat strip.
I had a heated basement in my rig when I camped in cold weather, but still added sewer tape https://smile.amazon.com/HEATIT-40-feet-Heating-Built-Thermostat/dp/B06XG17SZC/ref=sr_1_1 to keep the water feed warm, and added a work light https://smile.amazon.com/Simple-Deluxe-Aluminum-Reflector-Included/dp/B01E9IY6US/ref=sr_1_8 on an extension cord to the grey/black water tank cabinet and that worked to keep things from freezing up.
Since your gutters are probably full of ice, you won't be able to use traditional roof/gutter heat tape, but you might be able to fix this to the bottom of the gutter, and down the outside of the downspout
Frost King HC30A Heating Cables 30 Feet Black https://www.amazon.com/dp/B00427COLA/ref=cm_sw_r_cp_taa_ixUCCb8S9K2TX
Look around, you can find all different lengths
Frost King HC3A Automatic Electric Heat Cable Kits, 3ft x 120V x 7 Watts/ft, 3 Feet Black https://www.amazon.com/dp/B000IKSQ8U/ref=cm_sw_r_cp_api_i_Np9SCb67308CA
Pipe heater
Here it is. I got the 24 ft version.
Nah... go with this. Product built for this purpose. Cheaper and self regulates. Doesn't have to be outdoor rated.
Heat tape (or heating cable, whatever) on the pipes. I use this all winter and my pipes have never froze except one time when I forgot to turn it on.
Link
If you have access to the water main coming in, you can put a heater on it. Something like this would work https://www.amazon.com/HEATIT-6-feet-Regulating-Pre-assembled-Heating/dp/B0732YXBM9/ref=sr_1_3?keywords=Water+Pipe+Heater&qid=1573522401&sr=8-3
If you know he isn't home, you could also turn off the water at the main. This would minimize any damage if the pipe does burst. This should be your last resort though.
Ooh ooh ooh I know this one!?!? Pick me pick me.
I assume you’re in a colder climate that gets snow, they are for sliding under asphalt shingles to do “minimal damage” and hold down heat trace or electric de-icing wire to fight ice damming.
HEATIT Roof De-Icing Heating Cable Spacer and Clips Kit https://www.amazon.com/dp/B01MYNF7WZ/ref=cm_sw_r_cp_api_i_tfcFDbAXG3T8T