Reddit mentions: The best powersports pads

These are the ones I use, and throroghly support them. EBC makes some very good stuff, and in my experience, these are about the best you can get (for the money).

edit:
These also fit:

Bonneville & T100 (2001 - 2015)

Bonneville Mag Wheel (2009 - 2015)

Scrambler (2006 - 2016)

Speedmaster (2005 - 2016)

America 900 (2007-2016)

Search Ebay for "cnc levers ninja 250". There's way less of a selection for an 07 but they can be had for under $50 bucks. I have them on my 08 and they're great. Performance upgrade would include upgrading to HH pads http://www.amazon.com/EBC-Double-H-Sintered-Brake-FA129HH/dp/B000GRZIMC and changing out your brake fluid. Still under budget and you get much more than just looks.

I would go to ex500.org and register on the forums first. Anyways here's my top mods:

• Replaced clutch springs with stiffer ones - this helps at higher RPMs because the stock ones start weak and get weaker with age $10.80
  
  
• Replaced rear shock with stocker from a new gen ninjette because it's a lot stiffer and raises the bike a bit $49.99
  
  
• Removed the pair system because it does nothing good and with exhaust it makes popping noises $15.00
  
  
• K&N air filter installed and drilled 4 Half Inch holes in the left side of airbox $49.99
  
  
• Airbox mod requires carb tweaking so I opened up the carbs and rebuilt them for reliability $45
  
  
• Got some shorty levers 36.99
  
  
• Replaced stock ignition with Coil on Plug type ignition for an '08 ZX6R - prices vary but i got mine for 40 bucks including harness.
  
  
• New sparks gapped at .30" $8.10
  
  
• Higher quality front brakes $32.00
  
  
• Oil changed to Shell Rotella T $19.16
  
  
• Avon Roadrider tires big upgrade over stock. Prices vary I got mine for 350 installed both front and rear
  
  
• Best for last: Racetech .90kg/mm springs with gold valves $300
  
  

It depends on the weight and package size.

Just using some random ones I found on Amazon for an estimation, selling for $30 will leave you around $22, assuming they sell within 30 days.

If they are slow sellers (>6 months), you will have additional storage fees.

I don' know, I had these for a while on my 2nd gen and never had a problem with them.

https://www.amazon.com/Foreverun-Motor-Sintered-KAWASAKI-2008-2015/dp/B00D402IVC/ref=sr_1_4?ie=UTF8&qid=1523824155&sr=8-4&keywords=klr+front+brake+pads

https://www.amazon.com/Brake-Yamaha-V-MAX-VMX12-VMX1200/dp/B0182M6NV2

This is the OEM pad they refer to. The line is much more apparent.

Edid: no that is not the OEM pad but the line they refer to is the same. Yours has grinder marks.

http://www.amazon.com/EBC-Brakes-BRK017-Caliper-Relocation/dp/B00DTDB11W/ref=sr_1_7?ie=UTF8&qid=1459301529&sr=8-7&keywords=ebc017

This is the closest thing that I have found that may work but the geometry is off and that worries me a little.

I bought a bike for cheap that I could work on without worrying too much about scrapping. Problem is I cant find parts except for generic stuff on amazon :(

https://www.amazon.ca/MFS-Motor-Motorcycle-Sintered-2004-2010/dp/B07TLVG98C/ref=sr_1_5?keywords=cbr125r+brake+pad&qid=1568393053&sr=8-5

Should I avoid this type? where can I find quality parts for my bike [[CBR125R 2008]]