#1,740 in Tools & Home Improvement
Reddit mentions of Fluidmaster 400CRP14 Universal Toilet Fill Valve and Flapper Repair Kit, for 2-Inch Flush Valve Toilets
Sentiment score: 3
Reddit mentions: 12
We found 12 Reddit mentions of Fluidmaster 400CRP14 Universal Toilet Fill Valve and Flapper Repair Kit, for 2-Inch Flush Valve Toilets. Here are the top ones.
or
- FIXES NOISY, RUNNING TOILETS: Toilet repair kit replaces inefficient fill and flush valves, and leaky flappers to help solve most common toilet fill problems
- UNIVERSAL DESIGN: 400A toilet fill valve adjusts easily from 9 – 14 inches, fits most 2-inch flush valve toilets, and is ideal for use in 1.6 to 3.5 gallons per flush toilets or larger. Dual Flush: No
- CORROSION RESISTANT: Solid frame 501 2-inch flapper features corrosion-resistant Microban material to prevent breakdown and leaks due to bacteria and is chlorine and hard water resistant
- EASY INSTALLATION: Easily installs in 10 minutes or less to get your toilet flushing like new again
Features:
Specs:
| Color | Multicolor |
| Height | 15.76 Inches |
| Length | 3.71 Inches |
| Number of items | 1 |
| Size | 1- Pack |
| Weight | 0.6 Pounds |
| Width | 6 Inches |
Then replace the entire unit.
11 bucks delivered.
https://www.amazon.com/Fluidmaster-400CRP14-Toilet-Flapper-Repair/dp/B007TUHQWY/
Replace the flushing mechanism in your toilet. Sometimes when they start to go bad or the seals start to go bad water can seam buy and cause vibrations which will set off a high pitched noise. Changes in water pressure when your in the shower may cause it and when you flush the toilet everything gets reseated and temporarily fixes itself. They arent expensive or hard to replace. You can do it yourself with next to no handman experience.
Edit: This is the part youre looking to replace. Amazon sells them for $15 if you dont feel like getting off your couch but lowes/homedepot/walmart will have them as well.
https://www.amazon.com/Fluidmaster-400CRP14-Universal-Flapper-Toilets/dp/B007TUHQWY
or purchase at a hardware for under 10 bucks.
Like BiscuitRick said just turn off the water at the valve below, drain the tank uninstall old one and reinstall new one.
The fill valve is not shutting completely, if I had to guess; you can replace it:
http://www.amazon.com/Fluidmaster-400CR-Toilet-Flapper-Repair/dp/B007TUHQWY/ref=sr_1_1?ie=UTF8&qid=1463873704&sr=8-1&keywords=toilet+repair
https://www.amazon.com/Fluidmaster-400CRP14-Universal-Flapper-Toilets/dp/B007TUHQWY/ref=mp_s_a_1_2?keywords=fluidmaster+400a&qid=1565735354&s=gateway&sr=8-2
this is the fill valve i used https://www.amazon.com/gp/product/B007TUHQWY/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
and this is the overflow valve http://www.riverbendhome.com/rbhitem/54304*1?CAWELAID=120204730000013615&CAGPSPN=pla&CAAGID=20624948940&CATCI=pla-22125684747&catargetid=120204730000024628&cadevice=c&gclid=CL-9x-_pts0CFZcdgQodA6MFNA
The condensation is because of the back tank continuing to refill. Cold water in tank constantly 10 to 20 degrees cooler than the outside air forms condensation like a cold beer is wet on the outside and eventually that drips onto the floor forming a puddle like the little pool of water around your beer. It may be as simple as fixing the innards so it isn't filling constantly. Our toilets need a new seal flap inside every 5 years or so. Takes literally 2 minutes to replace. Cost is around 5 dollars.
It looks like the red thing in this item. I'd start with this. You need the one that fits your brand toilet. I'd go to local hardware store and with toilet brand and talecimsge of inside tank and outside toilet and ask the guy behind the counter which one you need to buy.
Fluidmaster 400CRP14 Universal Toilet Fill Valve and Flapper Repair Kit, for 2-Inch Flush Valve Toilets https://www.amazon.com/dp/B007TUHQWY/ref=cm_sw_r_cp_apa_i_M-lQCbA6S56YV
unless its' a relatively recent and modern valve column, I'd replace the whole thing...refit kit is under $15 and you basically have a new toilet.
That's really the best bet for stopping persistent leaks, the flapper matches the valve, and both are new.
They're talking about something like this
replace the whole "unit" - about ~$15.....
​
https://www.amazon.com/Fluidmaster-400CRP14-Universal-Flapper-Toilets/dp/B007TUHQWY/ref=sr_1_3?keywords=toilet+valve&qid=1559320172&s=gateway&sr=8-3
You can get parts from any hardware store. They have them at Walmart. You can order from Amazon too. So lots of options. Here’s an Amazon link:
https://www.amazon.com/Fluidmaster-400CRP14-Universal-Flapper-Toilets/dp/B007TUHQWY
It’s cheaper at Walmart by a couple dollars. You can shop around by searching for “toilet tank repair kit.”
The kits come with fairly good instructions on changing out all the parts. If you need something a little more in depth or like watching videos check out YouTube. Here’s a video link for the kit in the Amazon link:
https://youtu.be/QuLoZM74kHs
You can always come back here for help too! Good luck.
So like this?
http://www.amazon.com/Fluidmaster-400CR-Toilet-Flapper-Repair/dp/B007TUHQWY/ref=sr_1_2?ie=UTF8&qid=1462931317&sr=8-2&keywords=toilet+fill+valve