Reddit mentions of Milwaukee 9-In-1 Ratchet Bit Drivr

If you are driving alot of screws get a good driver with Torx or square bits. Phillips or flat head screws should be outlawed.

I have tons of 18 volt tools. But 90% of the time I use my 12 volt stuff. It is lighter and plenty strong enough for most all jobs I throw at it.

https://www.amazon.com/Milwaukee-Electric-Tools-2598-22-Hammer/dp/B077ZXR2GN/ref=sr_1_3?keywords=milwaukee+m12+fuel&qid=1563798041&s=gateway&sr=8-3

​

Get a good tool bag, To keep all your tools organized.

https://www.amazon.com/DEWALT-DG5543-Inch-Tradesmans-Tool/dp/B001P30BO6/ref=sr_1_3?keywords=dewalt+tool+bag&qid=1563036747&s=gateway&sr=8-3

​

This little screwdriver is my most used electrical tool.

It will take off a faceplate in seconds without scratching it.

https://www.amazon.com/Interchangeable-Screwdriver-Klein-Tools-67100/dp/B003FC75YE/ref=sr_1_7?keywords=klien+screwdriver+fast&qid=1563037724&s=gateway&sr=8-7

​

This works great also.

https://www.amazon.com/Milwaukee-9-IN-1-RATCHET-BIT-DRIVR/dp/B07N2XRJKN/ref=sr_1_5?crid=3S4QWUWTNOHH0&keywords=milwaukee+ratchet+screwdriver&qid=1563797885&s=gateway&sprefix=milwauke+ratchet+%2Caps%2C216&sr=8-5

​

These work great as stud finders, not sure how they build your houses but in america we have 2x4 wooden studs behind our walls every 16-24". This is a strong magnet that finds the studs by finding the screws that attach the drywall to the wooden studs.

​

https://www.amazon.com/gp/product/B000IKK0OI/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1

​

If you are moving any water lines or doing any plumbing look in to Pex, It is very easy to do and you can same alot of plumbing costs.

https://www.amazon.com/IWISS-Crimping-Crimper-Stainless-Clamps/dp/B019DPYQZM/ref=sr_1_4?crid=LGQIZBR2PEXY&keywords=pex+crimping+tool&qid=1563798123&s=gateway&sprefix=pex+crimp%2Caps%2C201&sr=8-4

​

If you are moving your toilet, look in to a wall mount. They are very modern and save you a lot of room.