Reddit mentions: The best power fastening tool parts & accessories
We found 816 Reddit comments discussing the best power fastening tool parts & accessories. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 284 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. ORIA Precision Screwdriver Kit, 60 in 1 with 56 Bits Screwdriver Set, Magnetic Driver Kit with Flexible Shaft, Extension Rod for Mobile Phone, Smartphone, Game Console, Tablet, PC, Blue
- 1. Multi-Magnetic Hand Tools : 60 in 1 Precision Screwdriver Set is Professional hand tools to repair most of laptops, phones, game consoles, and other electronics.
- 2. Variety of Specialty Bits : With different kind of Screwdriver bits, which made of chrome-vanadium steel are carefully selected by ORIA to meet all your need.
- 3. Flexible Shaft : A flexible shaft is included, which is great for stereo work as well as other large electronics where the screws are not on the surface.
- 4. Ergonomic Handle : The Unique non-slip driver available on the market is machined from a single piece of aluminum and covered with Silica gel; it also has a ball bearing mounted swivel top to simplify the operation.
- 5. Portable : Professional portable hardware tools with lightweight & compact design for easy carry.
- 6. Heartwarming Reminder: If there are any problems with the use or function of the product, or if the product is defective/damaged, please contact the seller first, we will do our best to solve the problem for you.
Features:
Specs:
Color | Blue |
Height | 0.787401574 Inches |
Length | 8.0708661335 Inches |
Size | 60 in 1 |
Weight | 0.79 Pounds |
Width | 3.7401574765 Inches |
2. TEKTON Everybit Precision Tool Kit (27-Piece) | 2830
- Includes 3-pc. slotted bits: 1, 1.5, 2.5 mm; 4-pc. Phillips bits: #000, #00, #0, #1; 3-pc. star bits: T3, T4, T5; 6-pc. tamper-resistant star bits: TR6, TR7, TR8, TR9, TR10, TR15; 2-pc. tri-wing bits: 0, 1; 2-pc. pentalobe bits: 0.8, 1.2 mm; 2-pc. nut driver bits: 4, 5 mm; 1-pc. precision screwdriver; 1-pc. spudger; 2-pc. bit organizers; 1-pc. storage case
- Specifically designed for repairing mobile phones, tablets, laptops, game systems, wristwatches, and eyeglasses
- Includes pentalobe bits for iPhone and MacBook
- Precision driver has a free-spinning endcap that allows constant finger pressure to be applied while turning
- Spudger lets you safely pry open housings without damage
- Specifically designed for repairing mobile phones, tablets, laptops, computers, game systems, wristwatches, and eyeglasses
- Includes pentalobe bits for iPhone and MacBook
- Precision driver has a free-spinning endcap that allows constant finger pressure to be applied while turning
- Spudger lets you safely pry open housings without damage
- All pieces store in pocket-sized storage case that goes anywhere
Features:
Specs:
Color | Red |
Height | 1.5 Inches |
Length | 4.3 Inches |
Number of items | 1 |
Size | 1 Pack |
Weight | 0.3 Pounds |
Width | 2.5 Inches |
3. Neiko 03044A Mini Ratcheting Offset Screwdriver and Bit Set, Pocket Size Close-Quarters ,1/4-Inch Drive
- [COMPACT]: Unique mini-size low profile ratchet driver handle is only 3/8” thick and 4” long, making it perfect for tight and awkward spaces.
- [REVERSIBLE]: Quick reverse thumb lever and a 16-teeth reversible ratcheting mechanism delivers smooth fastening and unfastening in both directions.
- [DURABLE]: All bits are constructed of chrome vanadium steel bits for extra strong durability and resistance to tool wear-out.
- [CONVENIENT]: This multi screwdriver has a magnetic like clip that holds the bit securely and provides enough torque, so the bit does not fall out during use. Universal with any 1/4-inch hex shank bit.
- [INCLUDES]: Ratchet screwdriver set comes with (7) 1-inch bits in an organizer: (3) Phillips (#1, #2 and #3), (2) Slotted (4.5mm and 7mm), and (2) Torx star (T15 and T20). 1 Ratchet.
Features:
Specs:
Color | One Color |
Height | 0.4 Inches |
Length | 4 Inches |
Number of items | 1 |
Size | 8 Piece |
Weight | 2 Pounds |
Width | 0.67 Inches |
4. Wiha 75093 16 Piece System 4 ESD Slotted, Phillips and Torx Micro Bit Set
- Small, light weight, with compact bit storage
- Hardened bits made of CRM-72 tool steel
- Indexed bit ring stores with the driver
- Ball retainer style non magnetic 100mm bit holder
- Handles of dissipative ESD safe material
Features:
Specs:
Color | Original version |
Height | 8.7 Inches |
Length | 0.8 Inches |
Number of items | 1 |
Size | One Size |
Weight | 0.17 Pounds |
Width | 2.8 Inches |
5. Vastar 62 in 1 with 56 Bit Magnetic Driver Kit, Precision Screwdriver Set Smartphone Repair Tool Kit for iPhone 8/8 Plus,7/7 Plus and other Cell Phone, Tablet, PC, Macbook,Clock, Game Console and More
56 bits well selected by Vastar to repair modern electronics that serve various popular laptops, phones, game consoles and other electronicsThe smart phone repair kit, updated with 1x long plastic pry openers and 1x triangle pry openers, Tri-Wing 0.8 and CRV Torx 1.5, works for iPhone 8, 8 Plus, iPh...
Specs:
Color | Orange |
Height | 2 Inches |
Length | 9.4 Inches |
Width | 5.9 Inches |
6. TEKTON 2905 3/8-Inch Drive Manual Hand Impact Driver Set, 7-Piece
- Includes 1-pc. 3/8 in. drive manual impact driver; 2-pc. 5/16 in. hex shank slotted screwdriver bits: 5/16, 3/8 in.; 2-pc. 5/16 in. hex shank Phillips screwdriver bits: #2, #3; 1-pc. 3/8 in. drive bit chuck; 1-pc. storage case
- Instant impact force loosens rusted or frozen screws without damaging them
- Forward and reverse drive direction
- Drives included screwdriver bits or any 3/8 in. drive impact socket
- Comfortable handle with non-slip knurled grip
- Frees corroded brake caliper screws and other vehicle or outdoor fasteners exposed to the elements
- Goes anywhere, no air or power source required
Features:
Specs:
Height | 2.25196850164 Inches |
Length | 7.99999999184 Inches |
Number of items | 1 |
Size | 3/8 in. |
Weight | 1.75 Pounds |
Width | 3.25196850062 Inches |
7. Wiha 75992 System 4 Precision Interchangeable Bit Set, Torx, Slotted, Phillips, Hex Inch, ESD Safe Precision Handle, 27 Piece In Compact Box
- Wiha tools are made to ISO quality standards.
- Wiha has been making Premium Tools For Over 60 Years
- Micro precision bits on 4mm hex drive
- Hardened for extreme durability
- Bits of exclusive CRM-72 tool steel
- Handle uses ball retainer not magnetic
- Standard extension adds 4" to length
Features:
Specs:
Height | 0.8 Inches |
Length | 6.3 Inches |
Number of items | 1 |
Size | Pack 1 |
Weight | 0.64 Pounds |
Width | 0 Inches |
8. Neiko 01925A Screw Extractor and Left Hand Drill Bit Set, 10 Piece | Alloy Extractors | Cobalt HSS Drill Bits |
Extraction bits easily remove broken screws, studs, bolts and other fittingsLeft-handed drill bits are made from cobalt fortified high speed steel for increased durability and service lifeSpiral flutes on screw extractors dig into the screw, increasing grip as torque is appliedComes in a durable met...
Specs:
Color | Clear |
Height | 0.79 Inches |
Length | 5.67 Inches |
Number of items | 1 |
Size | 1 Pack |
Width | 4.49 Inches |
9. DEWALT Right Angle Attachment (DWARA100),Yellow/Silver Right Angle Attachment
Right-angle Attachment For Impact Driver, 5X longer life on average vs. Milwaukee 48-32-2100 in Milescraft 1302Sure-set System Floating Magnet Secures Fasteners, True 90 degree head allows tight access when using 1" bit tipBetter Accessibility For Tight Spaces, Impact Ready Performance - Designed fo...
Specs:
Color | Yellow/Silver Right Angle Attachment |
Height | 8.74 Inches |
Length | 4.88 Inches |
Number of items | 1 |
Size | Pack of 1 |
Weight | 0.44 Pounds |
Width | 1.188 Inches |
10. Wiha 79242 11 Piece Torx Bit Selector (T5-T30)
Industrial Quality through hardened bitsPocket Sized box with slide out drawer, keeps bits organizedDimensions: Length-4.25" Height-2.0" Deep-.75"All Sets Include 1/4 Magnetic bit holder for power tool useGuaranteed Quality Bits - Made In Germany
Specs:
Color | Original Version |
Height | 9.8 Inches |
Length | 1 Inches |
Number of items | 1 |
Size | Pack 1 |
Weight | 0.25 Pounds |
Width | 3.6 Inches |
11. TEKTON 2910 1/2-Inch Drive Manual Hand Impact Driver Set, 7-Piece
- Includes 1-pc. 1/2 in. drive manual impact driver; 2-pc. 5/16 in. hex shank slotted screwdriver bits: 5/16, 3/8 in.; 2-pc. 5/16 in. hex shank Phillips screwdriver bits: #2, #3; 1-pc. storage case
- Instant impact force loosens rusted or frozen screws without damaging them
- Forward and reverse drive direction
- Drives included screwdriver bits or any 1/2 in. drive impact socket
- Comfortable handle with non-slip knurled grip
- Frees corroded brake caliper screws and other vehicle or outdoor fasteners exposed to the elements
- Goes anywhere, no air or power source required
Features:
Specs:
Height | 1.75 Inches |
Length | 1.75 Inches |
Number of items | 1 |
Size | 1/2 in. |
Weight | 1.75 Pounds |
Width | 7.75 Inches |
12. DEWALT Titanium Drill Bit Set, Pilot Point, 21-Piece (DW1361)
Titanium pilot point for longer bit lifeStarts on contact for cleaner holesNo spin shanks.Clip latch for secure closingTapered web provides greater durability to reduce breakingIncludes sizes from 1/16 inch to 1/2 inch in a plastic tough case
Specs:
Color | Yellow Titanium Pilot Point Drill Bit Set |
Height | 1.375 Inches |
Length | 8.75 Inches |
Number of items | 1 |
Size | One Size |
Weight | 1 Pounds |
Width | 8.75 Inches |
13. BLACK+DECKER Screwdriver Bit Set, Double Ended, 10-Piece
10 piece double ended screw driving bit tip setBit tip bar fits easily into a tool box, work belt pocket, or drawerPart number: 71 081Includes Phillips, slotted, square, and star bit tipsIdeal for common projects around the home and yard
Specs:
Color | one color |
Height | 6.5 Inches |
Length | 4.88 Inches |
Size | 10-Piece |
Weight | 1 Pounds |
Width | 0.75 Inches |
14. Wera 05056491001 Tool-Check Plus Imperial, 39 Pieces
- Ideal for working in confined spaces; Tough viscous bits for universal use
- Suitable for the attachment of bits with 0.25 inch hexagon drive
- Take it easy tool finder: color coding according to profile and size
- Package weight of the Product: 7 ounces
Features:
Specs:
Color | Factory |
Height | 0.5905511805 Inches |
Length | 7.086614166 Inches |
Number of items | 1 |
Release date | May 2017 |
Size | One Size |
Weight | 0.440924524 Pounds |
Width | 3.149606296 Inches |
15. Felo 0715732350 1/4-Inch T-handle Hex Bit Holder, 5-Inch long, 338 Series
- Bit holders holds 1/4" bits
- 2-component handle for added comfort, ergonomically refined soft-grip coating
- Strong, durable core for maximum torque and hanging hole for easy storage or inserting lever
- UPC code on each product
- Imported
Features:
Specs:
Height | 1 Inches |
Length | 8.75 Inches |
Number of items | 1 |
Size | 1/4-Inch |
Weight | 1 pounds |
Width | 5 Inches |
16. Wera 056490 Tool-Check Plus Bit Ratchet Set with Sockets - Metric
High quality low profile 1/4" x 3.5" oal. Ratchet is extremely strong capable of 48 ft. lbs. but has a return angle of 6°. With a bit installed ratchet is 1 1/8" in high x 3/4" wide. Great tool for compact spaces1/4" Ergonomic screwdriver x 3" oal. Has strong permanent magnet to securely hold and m...
Specs:
Height | 1 Inches |
Length | 6 Inches |
Number of items | 1 |
Release date | May 2017 |
Weight | 1.223565555 Pounds |
Width | 3 Inches |
17. Wera 05051274001 Bit Holder 813 1/4x78mm
- Bit holder for bits with 1/4" hexagon drive
- Ergonomic Kraftform handle
- Hexagonal non-roll feature to prevent any rolling away
- Country of origin: Czech Republic
Features:
Specs:
Height | 0.2 Inches |
Length | 3.98 Inches |
Number of items | 1 |
Weight | 0.05952481074 Pounds |
Width | 2.17 Inches |
18. Best Choice 101-Piece All Purpose Security Bit Set with Bonus Ratcheting Screwdriver, Chrome Vanadium Steel, Tamper Proof Design, ANSI Standard
PREMIUM MATERIAL - High strength chrome vanadium steel bits withstand more torque and reduce wear-outs to ensure durability and longevityEASY TO USE - precisely machined bit tips guarantee accurate size and chamfered bit ends insert into fasteners more smoothlyRATCHET SCREWDRIVER - Bonus 3-way rever...
19. Titan TIT16112 Metric Hex Bit Set, 13 Piece (13 Piece Metric Hex Bit Set)
Chrome vanadium steel bits for strength and durabilityHandy magnetic holder sticks to most metal surfacesPackage Dimensions: 22.098 L x 2.286 H x 6.604 W (centimeters)Country of Origin : China
Specs:
Color | Factory |
Height | 9 Inches |
Length | 0.5 Inches |
Number of items | 1 |
Size | One Size |
Weight | 0.18 Pounds |
Width | 2.5 Inches |
20. DEWALT Screwdriver Bit Set, Impact Ready, FlexTorq, 40-Piece (DWA2T40IR),Black/Silver IMPACT READY FlexTorq Screw Driving Set, 40-Piece
- Connectable accessory storage system to optimize storage space of the drill bits set
- Patented bit-bar design of DEWALT bit set allows easy removal of bits and customizable placement
- Clear lid of the driver bit set allows you to easily see contents at glance
- Clip latch for secure closing
- Small Bulk Storage size fits inside the Small and Medium ToughCase plus (sold separately) - Ideal for organizing loose bits
- CNC-machined bit tip for precise fit in screw heads for reducing cam-out
- Extended FlexTorq Zone transfers optimal torque
- Magnetic Screw Lock sleeve minimizes drops and reduces wobbles
Features:
Specs:
Color | Black/Silver IMPACT READY FlexTorq Screw Driving Set, 40-Piece |
Height | 8.75 Inches |
Length | 8.75 Inches |
Number of items | 1 |
Weight | 1.2 Pounds |
Width | 1.56 Inches |
🎓 Reddit experts on power fastening tool parts & accessories
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where power fastening tool parts & accessories are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
For anyone techy, it is important to have a good set of precision tools. they may not need them all that often, but when you need to fix something, it sucks to not be able to get into it.
This is a very nice, compact, set of precision drive bits that come mounted on a driver. The torx and small phillips bits will get you into most electronic devices. Having a nice set of hex keys is also important for general uses, but torx is more common in electronics. This set is not EDC friendly on your person, but as a student, he probably has a pack they can go in.
What is his opposition to knives? Does he feel he has too many already, he just doesn't think he's interested, or is he not allowed to carry them on his person in most situations? If It's anything other than the last situation, I'd still consider the Victorinox Alox Cadet Swiss Army knife. I didn't think I'd use mine much, but I got it out of Swiss Army nostalgia and swooning over the gorgeous blue that is available now. I keep it in my jacket's breast pocket and use it on an almost daily basis, but have still yet to use the blade on it (I also carry a dedicated knife). I'm really in love with this little tool. It's beautiful. The bottle opener is great. The can opener is great. The nail tool is fantastic (my nails have never been in as good of shape as they have been the past month). And it also has a very decent blade on it.
Alright, no offense to the first commenter but we need to clearly define what we are talking about.
There isn't an "impact driver drill" I believe your talking about something like this that is a cordless electric 1/4" impact driver. It accepts 1/4" hex driver bits notice the special cut out at the base of the bit, that's what keeps it from falling out. It functions like a drill/driver until it encounters sufficient resistance then it impacts, giving increased torque(rotational force), it does not produce a hammering force(along the axis of the bit).
Now this is an impact wrench it too functions like a drill/driver until it meets resistance then it impacts adding rotational force but not hammer force. What are the differences between this and the driver we looked at earlier? First is obviously size, the wrench is bigger, and stronger, and heavier. But that's not what makes it a different tool, what makes it different is the tip, it's a square, like for putting sockets on, in this case 1/2" sockets but they make 3/8", 1/4", 3/4" and much larger!
So could you use the first tool in place of the much larger second tool? Yes! Use one of these adapters
Here's the problem tho, the first tool, the driver, makes at most 117 ft-lbs, and I believe that's stretching, the second tool, the wrench, makes 700 ft-lbs. To remove a rusty, crusty, stubborn lugnut you will need the bigger badder tool, sometimes it still won't be enough, and you'll need a breaker bar with a cheater pipe.
Now what the other commenter mentioned, the hammering force, that can be made with a few different tools. Let's start with the handheld impact driver yes it's confusing, two different tools, both called impact drivers, but this one we'll call the handheld, you hold it with one hand, and hammer it with a hammer. It has a cam mechanism that takes some of that axial force and imparts a slight (like 1/16 of a turn) rotation. It's good for stuck screws especially Phillips heads.
Another, more common tool is the hammer drill it is essentially a drill, it grips with three jaws onto the same bits as our first impact driver, or onto completely round bits, like your common drill bits but when you engage the hammer mechanism it will push its chuck forward and back rapidly, and the pressure you apply to the back of the drill hammers the bit into the material your drilling, useful for concrete/masonary work. But for real drilling power into concrete you want an SDS rotary hammer drill this bad boy only accepts SDS bits, provides it's own rotary and axial forces and will drill thru reinforced concrete like non reinforced butter.
Ok I think that about covers it, if anyone would like to add on I'd appreciate it. And remember:
Always use the right tool for the job, a hammer is the right tool for every job, and every tool can be used as a hammer!
Obviously that was sarcasm.
I've been doing something similar to yourself though less in a consolidating manner than just upgrading my tools. I have a lot of Wera kit and can't say enough good about them though I've heard equally good things about Wiha and others.
On the multi side, something like this kit might suit you.
I have this kit which has the same small driver handle but a selection of regular short bits. It has the added benefit of a small but strong and very well made ratchet handle and sockets. If you need something along those lines as well the extra cost is worth spending.
As for regular screwdrivers I have this set but you may find their regular non-insulated ones cheaper.
The blades are top notch and the handles I find very comfortable in the hand. Everyones different though so you're probably best to try some out in a shop somewhere if you can get hold of them.
GearWrench 35pc micro driver set I have one of these and it comes in handy all the time. I'm a professional mechanic and this kit always comes with me on service calls.
or
Wera Tool-Check Plus Bit Ratchet Set with Sockets - Imperial Basically a fancier more indepth version of the GearWrench set. I don't own one, but its on my list and would likely replace the GW set at work. I'd bring the GW set home.
or
Knipex Alligator Plier Set What can be said, Knipex makes the best pliers. You can grab hex heads, turn pipe as it grips like a mother, and any other thing your sweet little heart desires.
or
If you want to save up a little more cash, these Knipex Plier Wrenches are awesome or so I've heard Also on my list of stuff to get. These play a similar role as adjustable wrenches.
Your bag may or may not be EDC by definition but here is a quick pack outline.
Bag: Vertx EDC Gamut
This is a CCW oriented bag, search LoadedPocketz and Youtube for reviews and the bag in action. There's a ton of organization in it for carrying lots of stuff, plus it's loaded with Velcro so you can either use Velcro add-on's or use their Tactigami to convert anything Molle to attach to their velcro.
Organizers - The Gamut is great but you might want to throw in something like a Maxpedition EDC/Beefy/Fatty to organize tools and supplies as needed, plus you can take them out of the bag if you want to be more mobile. E.G. leave bag in car but take IT toolkit with you to a site.
Tools:
Small light with multiple settings you so can use low settings for close up work with minimal reflection, or full brightness for other uses. Lots of lights will work for this purpose, headlamps work even better for hands-free but you'll look like a dork.
Then you have the EDC items you'll hear most people say:
It's not a standard screwdriver, you'll need a torx TR9 security screwdriver I believe, they are cheap. I have heard of people using small flat heads and having success but for best and easiest results get the torx. I clean my PS4 every 6 months it's a launch day console and still pretty quiet.
I bought this set for 15 bucks a few years ago love it comes in handy for electronics and small screws Amazon link.
It may need cleaning, or if it’s a pro and has reflective surfaces enabled (I think that’s the setting) or other Pro settings turned on it can add some more strain initially loading things in.
Mine was doing the same, clleaning out the PS4 of all the dust helped tremendously. It still gets somewhat loud, but not nearly so bad, with the Pro settings enabled at first, but then dies down.
To clean it you need some tools. These are what I used. ORIA Screwdriver Set, Magnetic... https://www.amazon.com/dp/B01E16J6RQ?ref=ppx_pop_mob_ap_share
Also I really recommend not just stopping at cleaning the fan, but getting all the way down to the heat sink. That can get clogged really badly with dust. I never thought about it until my PS4 kept shutting off due to overheating when playing God of War and the new Spider-Man. Once I got the heat sink cleaned I saw a ton of improvement and it stopped shutting down. Now I just make sure to clean it every 4-6 months and keep the side vents well dusted every week.
Hope that helps. :)
Sure thing! I’m happy to help! Of course, these are my opinions and experience. Some say “learn to freehand sharpen!” But that’s rough starting out and takes a long time depending if you have a knack for it. It’s easy to do well for 10 minutes, then screw up for 10 seconds and nullify all the progress you’d made. Stropping has made me get a little better feel for what freehanding would be like. When you strop, you want to be at a little less than the angle of the edge. Too shallow and you’re not honing the apex. Too steep and you’re rounding off the apex. Strop away not towards the edge, but to find the right angle see where the edge starts to bite the leather and decrease the angle a bit - that’s the right angle.
Yeah, I’d say either get that $5 oil I linked or just use the KPL. I agree about food - as long as you’re not over applying the oil, it’ll probably never get near or into the food.
If you get a strop and a lanksy turnbox, you’d be $35-40 invested and could go a long way.
Oh, and you also need a screwdriver kit if you don’t have one - more specifically, torque bits. Nick shabazz’s teardown videos have helped me many times. I really like this one for the price:
ORIA Precision Screwdriver Kit, 60 in 1 with 56 Bits Screwdriver Set, Magnetic Driver Kit with Flexible Shaft, Extension Rod for Mobile Phone, Smartphone, Game Console, Tablet, PC, Blue https://www.amazon.com/dp/B01E16J6RQ/ref=cm_sw_r_cp_api_i_pEjlDbHEPSHKV
that's a pretty legit list right there. I have a trunk full of gear, probably worth almost as much as my car. I do a lot of contract work, so my list is pretty much the same just slightly beefed up.
Replenishables
contractor things
and a myriad of other small parts pertaining to surveillance system installs, and screw bits for my drill, and i even have secured walkies for when i have multiple employees on site. plus i have to admit bluetooth headsets for when i have to deal with helpdesks or tech support while i'm on site... did i mention i do a lottttt of contract work. i'm all over the place. every now and then i run into things that this kit can't handle but for the most part i come away with a rather professional look.
sorry for formatting, i've seen plenty of these posts this is the first time i took time to actually look up evrything i've purchased.
Edit: Some formatting. added velcro :P
I daily carry a GORUCK GR1. I chose this pack because of how ridiculously overbuilt it is. Prior to getting the GR1, I carried less and I generally still couldn't go more than 6 months at best without ripping or destroying my packs. I also like that it doesn't have much built in organization. I prefer to create my own organizational system rather than use the one mandated by the pack. This is the primary reason I chose this over similar high quality options such as the Tom Bihn Synapse 25.
Also, I know there is a serious lack of cool hacking tools. Unfortunately I am currently in a more defensive than offensive cybersecurity position, so I don't really carry a lot of stuff around with me like I used to when I was red team.
On the front you can see that I have a Grimloc biner in case I need to attach anything to my pack. I also have a Gonex water bottle pouch and a large water bottle. On the back of the pack I have a pouch with my EDC Zebralight on the shoulder strap for easy access while wearing the ruck.
Opening the pack up, I have my tool pouch attached to the internal MOLLE webbing at the top as well as work gloves, a waterproof pack cover, rain coat, and umbrella. Additionally, I have a packing cube full of clothes. The packing cube isn't a usual part of my EDC, but I had the bag packed for an overnight trip so I thought I'd leave it in the picture to show what a few days worth of clothes looked like packed in the bag.
Under the flap on my admin pouch and inside the admin pouch you can see my primary toolkit. It's designed to have just about anything I would need for basic repairs throughout a day. I'm not handyman or anything, but I like to be able to solve just about any basic problem with just what is in the pouch. If I'm away from home or my car where I have more in-depth toolboxes, I can still solve most issues I run into.
There are two inner pockets. The mesh pocket has several micro USB and USB-C charging cords, an HDMI cable, cigarette lighter charging plug, and a wall charging plug. The top pocket, as well as the outer slant pocket are filled with assorted items that I want quick access to.
I don't know how the rotors are attached to the bearing/hubs in your car, but if they happen to be held in with screws like my car (Honda Fit), get yourself one of these. It'll rotate and push the screw at the same time, limiting the chances of stripping the screw. As for the actual replacement, look up Youtube videos specifically about your car, and pay attention to what the dude says. Try to get atleast two supports when your car is jacked up, as a safety measure. When you've installed your new brakes, look up how to break in your brakes. Oh and one more thing, make sure to mount your brake pads on the right side :)
But most importantly, enjoy it!
Happy happy cake day! I think the item that you will get from your high priority wishlist is this.
1 Cake or birthday related
2 Simon Pegg I believe he helped direct or something an episode of Doctor Who.
3 A book you are eager to read
4 Eating Utensils
5 Animal
6 Purple
7 A game
8 A guilty pleasure I have an excessive amount of lip products and still want more.
9 A Tool
10 Something from your childhood
11 An organizational item
12 Hobby
13 Nerdy/Geeky
14 Something Natural ;)
15 Green
16 Something you wear
17 Funny
18 Beads, Bees or Beans
19 Gardening
20 Favorite item
shakes ass Woo! Got them all! Thanks for the contest :)
Looks good but since you’ll be doing lots of processing I’d go with a ryzen 2700 build as it’s got better multi core performance and it comes with its own really good cooler. Also I’d just go down to Lowe’s or home depot and get you a good screwdriver and some philips Head bits for under 20 bucks instead of spending so much on an ifixit kit.
If you insist on getting a screwdriver kit, I’d go with ORIA Precision Screwdriver Set, 60 in 1 Magnetic Driver Kit as it’s got better grip, more bits, it extends and retracts, and costs a fraction of the prices.
You also probably don’t need That much wattage on your psu
Honestly, it looks like you just need to find a better flathead and then give'er. That's barely stripped at all.
If you have an impact driver, chuck up a flathead bit and bear down on it to prevent the bit from jumping out and stripping.
Something like this is the nuclear option. It's a hand impact, you strike it downwards with a hammer and that applies a twisting motion. Works great because of the combination of impact and that the same strike is driving the bit down to make sure it doesn't strip out.
I had success using the guide referenced here by u/BooB398, but honestly the majority of the dust buildup was along the side vents which I cleaned with Q-tips and did not require any disassembly. Also make sure you get the TR9 Torx Security bit if you are going to get in there (I ordered a kit on Amazon for like 14 bucks https://www.amazon.com/gp/product/B01E16J6RQ/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1)
As far as tools and such, you'll need a splitter cable for the fans (which should be included with the Noctua fans) as well as this: https://www.amazon.com/GELID-SOLUTIONS-PWM-Adapter-Cooler/dp/B005ZKZEQA
That adapter is to connect the bottom mounted fans to the gpu, so you can control the fan speeds using MSI afterburner (overclocking/fan profile program). Besides that, just a screwdriver, microfiber cloth, 99% isopropyl, and these pads if you decide to go the Accelero route: https://www.amazon.com/gp/product/B00UYTTLI4/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
You should also invest in a screwdriver set with small bits, as some of the screws will strip if you try to use too big of a bit. Something like this should be ok: https://www.amazon.com/ORIA-Screwdriver-Professional-Precision-Smartphone/dp/B01E16J6RQ/ref=sr_1_3?keywords=electronics+screwdriver+set&qid=1555887517&s=electronics&sr=1-3
The isopropyl and microfiber cloths are to wipe the cpu/gpu before applying thermal paste to ensure a completely clean surface, as well as clean up already applied thermal paste. DO NOT use paper towels as they will leave residue on the cpu/gpu.
All the things you mentioned about watercooling are why I didn't go that route. Not only maintenance concerns, but if something is installed improperly, you run the risk of destroying your components. It just takes one mistake or loose fitting to potentially destroy everything. Not to scare you from trying it or anything, but that was always a risk I wasn't willing to take.
I have my rear fan mounted to the case as intake, with the U9S blowing air toward the front of the case. I know it sounds stupid to vent hot air into the case, but this is how I get the best temps out of my setup. You might be better off aiming it upward, but I didn't want the bottom fans to be completely starved of air, so I put another 120mm intake fan on the front part of the side bracket to help cool the air coming from the cpu.
I also had the same concerns as you about the feet, and after several days of using the stock feet, I noticed how hot the table was getting underneath the case. I bought some custom feet from here: https://mnpctech.com/ncase-m1-mods/ncase-m1-black-silver-replace-feet/
They are a bit pricey, but I've heard of people buying feet meant for speaker amps that will work as well. They just need to use M3 screws to fit into the stock feet holes on the M1.
Edit: for the second fan, you would mount one on the back of the M1, directly to the case. The second fan would be mounted directly on the cpu heatsink, above the ram. If you're dead set on having that ram, you can always mount the fan a little higher so it clears the ram. Shouldn't be a big deal. If you plan on pointing the U9S toward the top of the case, then it doesn't matter what ram you have.
Edit2: wow thanks for the gold!
I have this, the ifixit and another one from ORIA that was on sale a few days ago (https://www.amazon.com/ORIA-Screwdriver-Professional-Precision-Smartphone/dp/B01E16J6RQ/ref=sr_1_7?ie=UTF8&qid=1541607353&sr=8-7&keywords=computer+tool+kit).
​
If you want to buy this one and have it as a backup or keep it at a secondary area like your car, home or work, its a great deal. But if you want one that you want to use as your main toolkit, go with the Ifixit. I had this one and the ORIA one I sent the link of first, and they were great. But once I tried the ifixit, I was more than pleased.
I have THIS torx set. I like it. I have been thinking about getting a 2nd one. You would also need a bit holder with this.
I free hand sharpen with dmt stones, but I hear good things about the Spyderco sharpmaker (be sure to get the diamond rods). I use a Flexxx strop (USA Made blades) and Bark River compound. There are a few good strop makers here on reddit too. A lot of people use nano-oil as lube. I use flouro grease and militec oil.
Not bad, its actually an old, simple design for a ratcheting wrench. Still popular because its cheap but does the job. Here's a very popular one on amazon:
https://www.amazon.com/Neiko-03044A-Ratcheting-Screwdriver-Close-Quarters/dp/B000XYOUS6
But yes, using bit ratchets is far better than allen/hex keys.
I do like the sound of adding some more Vessel tools to the kit. I think I have a mild screwdriver addiction at the moment. lol. Half the hex bits in the kit are actually Vessel bits.
I'm actually thinking of adding something like the Wera mini bit screwdriver, with some long reaching bits that could hopefully take the place of the Klein on the side.
https://www.amazon.com.au/Wera-05051274001-Bit-holder-4x78mm/dp/B01H88FO8O/ref=sr_1_142?keywords=wera&qid=1567550089&s=gateway&sr=8-142
The Klein works great, but I'm trying as best I can to make things as functional as possible, without having extra tools in there.
Not a dumb question at all. I’m really bad with cars even though I love them and I was able to handle the install. YouTube videos showed people removing the rear wheels. While that would probably make it a bit easier, I was able to do it without taking the wheels off.
For BRZ/FRS ‘13 - ‘16, there shouldn’t be any drilling needed. The 17’s however will need some holes drilled. Best of luck.
Btw, this tool came in super handy since the space was really tight:
ratcheting right andgle screw driver
I've used 3 different right angle drill attachments in the last few years. The first was a Milwaukee 110º one and it was alright, price was 15 dollars, I've killed that one. Then I bought this one for 20 at the time and it has been great, way nicer than my first adapter. I am still using it today.
http://www.amazon.com/DEWALT-DWARA100-Right-Angle-Attachment/dp/B00C0VSNKQ/
My friend has this 50 dollar Milwaukee one and its amazing. Way nicer than my dewalt and it can take a lot of torque. I've never got one since its a little bit thicker than the dewalt and most of the time space is an issue for me.
http://www.amazon.com/Milwaukee-49-22-8510-Right-Angle-Attachment/dp/B000BYEJ02/
\^ This.
I hate when people say things like what I am about to say but in this case it is true.
If you don't even have the tools to open the drive, this is not the project for you. Opening a hard drive yourself to recover data is a really terrible idea when you are talking about exposing the platters. There is a reason data recovery is so expensive and it isn't just because they have high profit margins.
In the event that there isn't any data on there that you care about and you want to give it a go as an academic exercise....that is a horse of a different color.
A T9 is actually pretty big. In my bag with me I have a kit that includes a T3 through T8 and it wouldn't surprise me at all if your drive required something in that range.
If you live near a Micro Center you can pick up something like this kit. It is quite usable.
http://www.microcenter.com/product/441261/54_bit_driver_kit
I actually have the Inland "ufixit" generic version from Micro for under $20 and it's really handy.
http://www.microcenter.com/product/486365/uFixit_Bit_Driver_Kit_-_54_Pieces
If you don't have a Micro Center nearby, try something like this on Amazon?
https://www.amazon.com/ORIA-Screwdriver-Professional-Precision-Smartphone/dp/B01E16J6RQ
Yup, I just replaced it and its been working fine ever since. There are various youtube videos on replacing the power supply, its easy. You'll need a TR8 screwdriver. I bought a set that costs around 15$ CAD. Power supply cost about 55$.
​
https://www.amazon.ca/TEKTON-2830-Everybit-Precision-Electronic/dp/B009MKGRQA/ref=sr_1_7?crid=3I5S4DKEMKDAF&keywords=tekton+screwdriver+set&qid=1566453570&s=gateway&sprefix=tekton+sc%2Caps%2C153&sr=8-7
​
https://www.amazon.ca/ADP-240CR-Replacement-Playstation-CUH-1100A-CUH-1115A/dp/B07GYJWXZ7/ref=sr_1_3?crid=2CIXD4AMOGG25&keywords=ps4+power+supply&qid=1566453593&s=gateway&sprefix=ps4+power+supply%2Caps%2C134&sr=8-3
There are tons of guides and videos on youtube to help you out. Its not complicated. There are around 7 screws(4 on the back of the PS4 and 3 holding the power supply in) you gotta take out. Unplug it and pull it straight out while trying not to bend the prongs. Pop your new power supply and screw everything back up. Took me about 10 minutes. I hope that fixes your issue because if it doesn't, then it might be the logic board and you might need professional help.
A magnetic screw driver set helps out a lot.
I got this one
An ESD mat
and wrist strap are strongly recommended, though not required. There are other ways to ensure that you're grounded.
Thermal paste Along with some >90% alcohol to clean off the old thermal paste if needed.
And lots of patience. I assembled and disassembled my PC multiple times until I was happy with my cable management.
I'm a big fan of using 3" long bits. the shorter 1" long bits just don't fit in a lot of electronics and such.
Depending on your budget the 3" Wiha "power bits" are excellent. There are a bunch of cheap chinese made kits too which work fine.
I really like using this small Wera bit holding handle for electronics work. It works really well with 3" bits.
I also like this Wera bit holding screwdriver which is a little bigger (size of an average screwdriver) for regular work.
You're garage!
Seriously, this is one of the of the higher value maintenance tasks most people can do at home. It can easily save you $200 and much more if you're also changing rotors. Just use the jack from the car if you don't have a floor jack. The only thing you might need that most people don't have are jack stands (safety first). You might also need some grease for the pins and the back of the pads, but otherwise it's pretty simple tools. You might also need an impact driver if you need to replace the rotors as well (I'm not sure if Yukon rotors are bolted on at OEM). Like this: http://www.amazon.com/dp/B000NPUJYE
Here is a decent guide:
http://www.paulstravelpictures.com/GM-Chevrolet-Tahoe-Front-Brake-Pads-Replacement-Guide/
I got this Wiha set after after destroying a few cheapo bits and couldn't be happier with it. Bonus: the box can act as a handle in a pinch
I also recommend this magnetic bit driver. It's reasonably priced, very comfortable in hand, and the magnet is very strong.
This is a selection of what I keep in my tech go-bag. You'll build your kit as you learn and build experience, or realize you could have helped a customer out of a jam quicker if you had that tool with you.
Various extra parts I've accumulated over the years like screws, ATX Molex Power to SATA Power Adapters, ATX Molex Y splitters, SATA cables etc..
Good luck and some tools overlap like multi tools and pliers so if budget is low, go with the tool that covers the most jobs.
Edit: I noticed your bag is kind of expensive compared to something like a Dewalt tool bag. I use a plain Dewalt bag which is not as cool as the one in the link, but it's just as tough. This might be a good and less expensive consideration for you if you don't require the look of a briefcase for your tool bag.
Edit 2: You may want to mark your tools with a wrap of some crazy bright color electrical tape to be able to recognize them when they walk away.
I have this https://www.amazon.com/dp/B00C0VSNKQ/ref=cm_sw_r_cp_awdb_t1_pDOpDbJ4JM57C but it's bulkier than what you show in the picture. Not sure of a slimmer option, but the DeWalt is a lifesaver and of good quality.
I would think if you have a drill bit that doesn't have a smooth shank, it could work for drilling. The piece I linked accepts standard hex shank bits, so a drill bit without a smooth shank could work
Boxer - Boxer 30 Pcs 4mm Precision Screwdriver Set - PK30 https://www.amazon.com/dp/B000FGQ1G6/ref=cm_sw_r_cp_apa_O..YzbM6B48CZ
I've had this kit for years since my day job was repairing computers. It hasn't failed me yet.
If you want a much nicer set wiha is one of the best brands when it comes to precision screwdrivers
Wiha 75992 System 4 Precision Interchangeable Bit Set, Torx, Slotted, Phillips, Hex Inch, ESD Safe Precision Handle, 27 Piece In Compact Box https://www.amazon.com/dp/B0000WTBO4/ref=cm_sw_r_cp_apa_qbaZzbCKNSP8S
So help me out here, I've had this Wera set on my Amazon wish list for awhile. At $65.99 for 30 pieces, you're spending $2.20 per bit.
That price is considerably more than comparable sets like this 40-piece DeWalt set that goes for $24.98 ($0.63/bit), or this 42-piece Milwaukee set for $19.98 ($0.48/bit). This means the per-bit price of the Wera set is between 3.5 and 4.6 times that of comparable sets made by two other major manufacturers.
Do you really get that much more life out of the Wera bits to justify the huge jump in price?
Probably not what you want to hear, but you'll probably need to get a new stickbox (desoldering the old one, soldering a new one). It's a straight forward process and hard to mess up, but the cost can be a big factor if you don't already own the equipment.
Video for reference.
Other option would be to just buy another controller off Ebay, open that controller and swap the guts with your old controller.
You can find a bunch of results for analog stick boxes on Ebay.
Best of luck!
I have an update on my own blend door problem. Because I'm a glutton for punishment I went ahead and bought the Dorman replacement that I mentioned in my other comment and did it myself instead of taking it to Ford. I can confirm that the Dorman part is significantly heavier, physically thicker and higher quality than the OEM unit. The gear set is in a slightly different arrangement and the gears themselves are more robust. I can also confirm the overall shitty quality of the OEM part.
The install wasn't quite a nightmare, but it was challenging. I used this video as reference though I didn't have to take the driver's seat out. I also had this handy mini ratchet which was absolutely perfect for the job along with a T20 bit. Now the tricky part which I wasn't quite sure of going in: I switched the car on and turned off the HVAC assuming that doing so would put the actuator in some sort of parked position. This probably isn't necessary since it likely goes back to the same position when the car is turned off. Anyway, after removing the OEM blend door I noted which position the output shaft was in. There's a little arrow on the casing that part of the gear lined up with. The new unit's output shaft wasn't in the same orientation. So, I plugged the Dorman unit in but didn't install it, turned the car on and switched the HVAC on and off to put the new unit in the same position as the OEM one. After that I noticed the output shaft still wasn't in the correct orientation. So, I had to open it up and take out one of the drive gears so I could reorient the output shaft. Once I did this the new unit slid into position pretty easily and I tested it out and BAM, no noise and the climate control works as expected. Now to see if this one lasts longer than 13,000 miles but after seeing the two parts together I really think it will. Hope this helps someone!
Edit: So I've got everything in one place for people stumbling across this here's the link to the Dorman part. It is Dorman 604-400 Air Door Actuator replacing OE part BE8Z19E616B
I always bring a few items to every show I do to prevent those "oh shoot!" moments:
Ninja edit for links and more detail.
I've had this set for over two years. When one finally breaks or I lose one ( mostly the tiny ones) I just buy the single bit of the same kind. They work really well on metal and plastic. They're for making jokes in plywood or through a 2x4.
DEWALT DW1361 Titanium Pilot Point Drill Bit Set, 21-Piece https://www.amazon.com/dp/B004GIO0F8/ref=cm_sw_r_awd_Gbtywb2RR9JW9
Rockler has a set of woodworking bits that I pull out when I'm working on something nice like a box or some nice hardwoods.
http://www.rockler.com/rockler-25-pc-hss-brad-point-bit-set
Hope this helps!
Exactly right but I think it’s too late for this screw. The left-handed drill bit idea is the best choice IMO.
Neiko 01925A Screw Extractor and Left Hand Drill Bit Set, 10 Piece | Alloy Extractors | Cobalt HSS Drill Bits | https://www.amazon.com/dp/B000F9ANQW/ref=cm_sw_r_cp_api_48c-BbVJE5B8K
Hozan JIS-4 JIS Screwdriver Set (NEW 3rd. Gen) https://www.amazon.com/dp/B00A7WAHTU/ref=cm_sw_r_cp_api_09c-BbD50WFW8
If you do electronics stuff fairly regularly, I'd recommend one of the ifixit kits. They're kinda pricy but really high quality bits.
You can get cheaper ones that are still pretty good like this screwdriver kit for $15, https://www.amazon.com/ORIA-Screwdriver-Professional-Precision-Smartphone/dp/B01E16J6RQ/ref=sr_1_4?ie=UTF8&qid=1525454044&sr=8-4&keywords=Screwdriver+kit
Or if you want one with every little tool you could ever possibly need this is a good deal for $35. https://www.amazon.com/ORIA-Precision-Screwdriver-Magnetic-Electronics/dp/B06Y2N568J/ref=sr_1_2_sspa?ie=UTF8&qid=1525454044&sr=8-2-spons&keywords=Screwdriver+kit&psc=1&smid=A2FOADTO08BQD0
Just don't get one of the sub $10 kits that come with all sorts of extra junk, those bits and tools are really low quality in my experience.
What is your budget?
Here is my suggestion. Forget about getting hand screw drivers; IMO, waste of money unless if you are an electrician or need to pry something, they are bulky and waste time. I would suggest spend a few extra dollars and buy a electric screwdriver like this or an 12v impact like this with a bit set like this. Bit sets are great because your don't need to gave a bucket of screw drivers laying around and you with have every bit you need in a small form factor.
If our budget is tight check your pawn shops often and look for NEW or LIKE NEW versions of these tools. You can find them for cheap. Remember these tools will last you forever.
Looks like a good kit to me! Do you have a pipe reamer? Thumbs up for having a tick tester, too. One thing I added to my kit recently was the Wera Tool Check Plus (this guy I got mine on sale for like $50-60CAD. I have the same impact and it’s handier’n frig for working on shit in tight spots and you can do quite a bit with it and the bit holder and bits work great in the M12 impact.
Oh, and ditching the crimpers for an M12 propex expander would be a good move 😉
What you are describing sounds like this:
GearWrench 9008 1/4-Inch Combination Ratcheting Wrench by Apex Tool Group http://www.amazon.com/dp/B0002NYD44/ref=cm_sw_r_udp_awd_YDS0tb09EZ2G5
But this may be a better fit:
Neiko 03044A Mini Ratcheting Screwdriver and Bit Set, Pocket Size Close-Quarters ,1/4-Inch Drive by Neiko http://www.amazon.com/dp/B000XYOUS6/ref=cm_sw_r_udp_awd_8FS0tb012H4Q2
Hope this helps!
I second Wiha! I have many other cheap sets, got this set for my bday: http://www.amazon.com/gp/aw/d/B002PJ3IYE/ref=mp_s_a_1_4?qid=1368322598&sr=8-4&pi=SL75
It is the Best set I have ever used! Quality steel that I can't strip, perfect size bits for a perfect fit.
Right angle attachment. I have the dewalt one. They sell it at home depot. They work great. I recommend getting one if you don't have one.
DEWALT DWARA100 Right Angle Attachment https://www.amazon.com/dp/B00C0VSNKQ/ref=cm_sw_r_cp_apa_euWnyb1Q21X15
Not op, but it is not hard at all. Just takes some common sense and the proper tools. I highly recommend this pocket ratchet off Amazon. It is very helpful with the tight spaces. https://www.amazon.com/dp/B000XYOUS6/ref=cm_sw_r_cp_apa_i_LnC6Cb0ZVA1PR
Dunno what country you're in, but the appropriate name for the tool to hit these screws is called a "Close quarters ratcheting screwdriver", and can be had for ~$10 for a pretty good one.
I have one like this.
I would return if it is not the quality you expected. Wiha is supposed to be a premium brand. None of the pictures look like major issues, but you are paying for something that is supposed to be nice. You could even save a few dollars and buy this https://www.amazon.com/Wera-056490-Tool-Check-Ratchet-Sockets/dp/B00I8MYMT2/ref=sr_1_1?s=hi&ie=UTF8&qid=1493311078&sr=1-1&keywords=wera+set
Had that happen to me as well. Trickier to fix than the circle pad, but still doable. Might I recommend:
Try searching for "Torx Tamper Resistant" or "Torx TR8" instead of "Torx Security", you might find better results.
I got this set of Amazon: TEKTON 2830
It's cheap and you get bits for pretty much any popular electronic device.
Just did this myself.
A couple tips.
Here's the clear shell: https://smile.amazon.com/gp/product/B075JJ2KH5
Get this screwdriver kit: https://smile.amazon.com/gp/product/B009MKGRQA
Precision tweezers also help a lot.
You'll need 3 bits out of that kid and the little plastic tool that comes with it.
That's it!
No mate you won't need any additional cables, the motherboard willo come with SATA cables and your power supply will come with the necessary power cables. Do have a screw driver set such as this one: https://www.amazon.com/gp/product/B015F734P0/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
It has a number of attachments that can always prove handy and more so, it's magnetized and will make your life easy when dealing with the little screws. And no a magnetic screwdriver such as that one won't damage anything, the magnetic field is too mild!
Good luck on your build and do write in again if you're stuck at any point. Cheers!
if you're talking about the rubber on the joystick, you find find replacement joysticks on amazon: http://www.amazon.com/Gamecube-Replacement-Analog-Yellow-Replaces-Controller/dp/B004H7P0B6/ref=sr_1_1?ie=UTF8&qid=1421534140&sr=8-1&keywords=gamecube+joystick However, in order to open the controller, you need a tri-wing screwdriver: http://www.amazon.com/Tri-wing-Screwdriver-Nintendo-Gamecube-Gameboy/dp/B000S6AG9G/ref=sr_1_1?ie=UTF8&qid=1421534165&sr=8-1&keywords=triwing+screwdriver Although, I would recommend not getting if from this seller (Just wanted to show the type of screwdriver needed). While it is cheap, a lot of people have waited 6+ weeks for it and nothing from the seller (me included). I would recommend buying this handy tool kit: http://www.amazon.com/TEKTON-2830-Everybit-Electronics-Precision/dp/B009MKGRQA/ref=sr_1_2?ie=UTF8&qid=1421534165&sr=8-2&keywords=triwing+screwdriver replacing the joystick isn't that hard, everything fits into place
I highly recommend the Wiha 77790 Ultra Driver Multi Tool. Be sure to read the comparison chart to understand the different bit combinations available. I use the Tradesman model.
If you need something a little smaller consider the Wiha 75093 16 Piece System 4 ESD Slotted, Phillips and Torx Micro Bit Set either on its own or in addition.
If you’re looking for a good set of precision drivers I recently acquired the Xiaomi Wiha Precision Screwdriver Set, 24 Magnetic Driver Bit Set, Pocket Screwdriver Tool Set, Mini Screwdriver Kit, Repair Tool Kit for Electronics and am very pleased with them. If you’re willing to wait and run the risk of receiving a counterfeit product, you can also find this set (as I did) on Ali Express for a few less dollars.
FWIW I carried pocket knives on the NYC Subways for over 20 years without once attracting attention.
This is more for the road, but the small size sometimes comes in useful in the shop. The ratchet is rated for 33ft.lb. The whole kit is about 2/3 the size of my hand excluding thumb.
I've got a Wiha 75992 which is awesome. Looks like it might fit OPs needs
For tools I really like the Tusk T handle tool Then I have a couple pouches one with the sockets, and the other I fill with a Philips bit, a flat bit, and a metric hex key bit set like this. I still have to carry the 10/12 wrench for chain adjusting, the sparkplug puller, and the 27 size spanner for the rear. But compacting all the Hex tools and screw driver tools into a pouch is super handy. Plus with the tool kit wrenches there are so many bolts that just strip if you try to use it, the sockets are so much better and faster. Make sure to have a spare master link. Also maybe a small length of wire, and defiantly a couple spare fuses, I think the fuse box carries a spare in it, but should check. Depending on the miles and conditions, I carry a smaller chain lube. I also run Tubliss, if you get a flat you can generally still ride out of the woods on it, and it is easy to patch puncture holes. Also no chance of pinch flats.
Wiha Tools makes the best micro screwdriver bits around, and some of their products are available on Amazon. If I were in your shoes I'd buy this
My personal solution is to keep a Leatherman Wave with a Leatherman pocket clip in my EDC backpack along with a Leatherman Bit Kit that I've modified with a Nite Ize pocket clip and some gorilla tape. Anytime I need to do some screw driving I just clip the wave and bits onto my pocket and they're incredibly accessible.
When you get around to it you should definitely treat yourself. Hex ratchets are total game changers. They work super fast and they are way better for hard to reach bolts. They also make assembling IKEA furniture a breeze.
This one is only $9 and gets good reviews. No tire lever but totally worth having in the toolbox.
Just a suggestion, [this:] (https://www.amazon.com/TEKTON-2830-Precision-Electronic-27-Piece/dp/B009MKGRQA/ref=sr_1_6?s=videogames&ie=UTF8&qid=1468693084&sr=8-6&keywords=tekton+tools) is a good investment. I've used it for smartphones, laptops, DSLR cameras, Xbox remotes, and more, but like others are saying, on ebay you might get lucky and find a listing with a screw driver included, or just flat out find it cheaper.
This kit comes with lots of tips, extenders, a case, and another tool which I haven't found a use for yet, all for $11. You might even be able to find it cheaper somewhere else!
It depends on the quality. I have a couple sets from Wiha ranging from $15-50, but you certainly don't need to buy ones that nice. I bought a couple of these sets to give to people last year. I kept one for myself and it is percectly fine.
I've looked an an Ifixit bit set that someone I know bought and it's not very high quality, not terrible but, not great.
I personally have this set: http://www.amazon.com/Wiha-75992-Precision-Interchangeable-Phillips/dp/B0000WTBO4/ref=sr_1_13?ie=UTF8&qid=1427321240&sr=8-13&keywords=wiha+bit+set and it is very very good. ESD safe handle for electronics.
Another tool that can really help is a T-handle hex bit holder. In my experience, this is the best driver to work on carbs. For screws that are are already mangled, or when I expect that they'll be seized (front brake master cylinder cap x1000) and I need more assurance, I use the $8 Harbor Freight impact screwdriver.
It all depends on how much you want to spend. There's some decent drill and driver kits out there, like this one: link. That's got a ton of driver bits in it though, and it's probably much more than you'll need for basic home improvements.
Black and Decker also sells a combo kit, but it may be too extreme in the other direction, because it's pretty basic in the drill bit area: link.
You could always get a decent set of drill bits, and then pick up a separate set of drivers. Here's a basic set of drivers for $3.80
Edit: I just saw your edit. Maybe the second link would be in your range?
This may seem dumb, but would you guys recommend this over the Vastar set? I was thinking having the flexible shaft and a few more bits might be useful in some of my builds.
Backs are easier than fronts... but make sure you have something like this to screw in the backs.
The part the instructions didn’t help:
After I figured out how the S clips go on in the most illogical way, everything else is easy... also, don’t forget the spacers in the front!
this is a handle I like and use, https://www.amazon.com/Felo-0715732350-4-Inch-T-handle-Holder/dp/B000E62NIC
good value! German tool. It is basically a 1/4" bit handle. I like having different handles for the differing bits I use. It makes things faster/ easier than sitting there juggling bits. Once you have the bit size and specification figured out, you do different things from there, maybe get an extra one or two or whatever. Anyway it is a great thing, as you can imagine, to turn a loose disco into a happy scooter. does not work every time. I report the ones that are missing 3 out of the 4 base screws. but I tell you, Often I have tightened up about 70% of them. It's a real issue.
A new screen and back cover would be $68 from eBay, I just replaced the battery in mine and it's awesome, went from around 4 hrs of screen on time to 8 hrs. You can get a new screen and frame from eBay here for $57.66, and you can get a new back cover from $10.33-$19.51 (depending on color) here is Metallic Red, Black, and here's Ballistic Nylon Black, and Blue. I'm also assuming that you haven't replaced your battery either so here's the battery from Amazon for $12.98 if you want that too. If you don't have small screwdrivers/bits then you'll need to buy a cheap "mobile" work kit, I used this one from Texton for $9.24. It might seem easier to just buy a new phone, but there's nothing that really compares to the Turbo, I would also watch this video from JerryRigEverything on repairing the device before purchasing anything. The fact that the screen comes with the frame will make replacing the screen easier and you won't have to worry about applying adhesive or removing the frame from the old display, and there's a lot of adhesive holding the back cover on, when I replaced the battery I removed all of it and nothing is shaking around or loose. So for a new screen, frame, back cover, battery, and tools, it would be $90.21.
This is only 1.16 and free shipping. If you are doing an order that can have an add-on item this is $4. Thanks for the contest!!!
I have a Wiha Micro Bit Ratchet Set on my "Expensive Shit" Wishlist. It would make my life easier when I'm working on whatever laptop/desktop/gadget/etc. I have in front of me. I've been wanting something like this for a while, but haven't had a chance to buy it yet.
I already have this tool, but the ratchet set has way more going on! PLUS, getting the ratchet set would allow me to give this to someone I know who needs one.
Win-Win!
Thanks for the contest!
These do a great job also until the head is fully rounded out
TEKTON 2905 3/8-Inch Drive Manual Hand Impact Driver Set, 7-Piece https://www.amazon.com/dp/B000NPPATS/ref=cm_sw_r_cp_api_i_b0OkDbAQAGG1H
/u/MrVinceyvince
if the bit isn't in this kit I wouldn't know what to do myself...haven't found one yet....there is very few "electronic" security screw bits this does not have if any.
best $12-14 you will ever spend towards taking things apart.
Amazon
Vastar 62 in 1
https://www.amazon.com/Vastar-Magnetic-Precision-Screwdriver-Smartphone/dp/B015F734P0/ref=sr_1_6?ie=UTF8&qid=1503977321&sr=8-6&keywords=electronic+screwdriver+set
Haha I was actually looking at one of those 90 degree angle attachments, but figured I don't really need it yet. Will wait until it goes on clearance.
That makes sense about the bit holders though. Same thing, will wait to find some on sale since I don't need them urgently.
I came across this set of titanium bits on sale, but it only goes to 1/4. /u/blbd mentioned that this is probably the most cost effective option since it doesn't have the pricier bits, but it means if I ever need more bits, I would need a new case; this is why I was going to wait until this one goes on sale, but might be a silly endeavour.
Is this the knife you use currently? Only downside I've seen is someone people say it gets uncomfortable to hold - looks good otherwise.
Best? Probably not. We've been firm believers in the Husky ones where I used to work: http://www.homedepot.com/p/Husky-8-in-1-Precision-Slotted-and-Philips-Screwdriver-Set-71281H/204664388
I used to take laptops apart for hours every day, it always seemed to do me well. I slighly preferred their older style (looked like this)
Basically they work well until they get lost, and they're cheap enough to just repurchase.
I also used this at another job: http://www.amazon.com/dp/B009MKGRQA
Not amazing quality, but I liked the selection of bits. Also cheap.
These things are tiny, but not a bad size really. I ordered what I thought was one of the Wera bit holder and got three which is fine by me. Also got a set of Wiha T5-T10 Torx bits to go with it.
Haven't really used them yet but they seem nice.
I'm generally a bigger fan of plastic spudgers for disassembly.
I'm also a big fan of iFixIt, but this is a decent cheap screwdriver set. I have one of these in my car and in my laptop backpack at all times.
I also highly recommend a magnetizer/demagnetizer tool.
ORIA Precision Screwdriver Kit, 60 in 1 with 56 Bits Screwdriver Set, Magnetic Driver Kit with Flexible Shaft, Extension Rod for Mobile Phone, Smartphone, Game Console, Tablet, PC, Blue https://www.amazon.com/dp/B01E16J6RQ/ref=cm_sw_r_cp_api_i_wDfADb9JXTR73
This is what I used and I was able to put everything together but all really need a good screwdriver and some bits but the kit I linked has everything you need and more
Sounds like you need a torx driver like this set.
Wiha 75992 System 4 Precision Interchangeable Bit Set, Torx, Slotted, Phillips, Hex Inch, ESD Safe Precision Handle, 27 Piece In Compact Box https://www.amazon.com/dp/B0000WTBO4/ref=cm_sw_r_cp_apa_i_k5mDDb0TYJHX3
Here is a link to an Amazon listing. But there were a lot of various brands and options when I searched “left hand drill bit” so you can browse and make a choice of your favorite.
I've personally used the following kits:
Kit Option 1
Kit Option 2
Both are great. The second kit adds a few tools for mobile device repair/fat finger support.
I am still waiting on my kit but I like you did some research and was told to make sure you have a 4mm hex bit along with the proper size screw driver. This is the tool kit that was recommended:
https://www.amazon.com/gp/product/B009MKGRQA/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Wiha, I bought this set when it was on sale a while ago to cover all my bases for knives and absolutely love it. I'm sure they have a torx set or something smaller closer to what you're looking for though.
https://www.amazon.com/gp/product/B0000WTBO4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Jigsaw - http://www.amazon.com/Black-Decker-JS515-Variable-Jigsaw/dp/B001CL4ZHK/ref=sr_1_3?s=hi&ie=UTF8&qid=1405629429&sr=1-3&keywords=jigsaw
Bits - http://www.amazon.com/Black-Decker-71-081-Screwdriving-10-Piece/dp/B000RH3DW8/ref=sr_1_5?s=hi&ie=UTF8&qid=1405629356&sr=1-5&keywords=power+drill
Power Drill - http://www.amazon.com/Black-Decker-DR260B-8-Inch-Driver/dp/B004FRXWRW/ref=sr_1_4?s=hi&ie=UTF8&qid=1405629356&sr=1-4&keywords=power+drill
Tape measure - http://www.amazon.com/Stanley-33-115-10-Foot--4-Inch-PowerLock/dp/B00009OYGH/ref=sr_1_7?s=hi&ie=UTF8&qid=1405629447&sr=1-7&keywords=tape+measure
Square - http://www.amazon.com/Swanson-SO101-7-inch-Speed-Square/dp/B00002255O/ref=sr_1_1?s=hi&ie=UTF8&qid=1405629470&sr=1-1&keywords=square
You actually will have some more money for clamps and wood to make projects. There's a lot you can make for yourself with just these things and some creativity. Plus, it'll let you be pretty handy around the house.
OK, so what I purchased from Harbor Freight was somthing similar to this:
* https://www.amazon.com/Neiko-01925A-Extractor-Extractors-Cobalt/dp/B000F9ANQW/ref=sr_1_12?keywords=screw+extractor+kit&qid=1554384193&s=gateway&sr=8-12
​
However if you already have drill bits, including a small enough one for that buffer, then you'll just want one of these.
* https://www.amazon.com/Extractor-TIAMAT-Hardness-Extractors-Stripped/dp/B07GLPLV78/ref=sr_1_11?keywords=screw+extractor+kit&qid=1554384193&s=gateway&sr=8-11
* https://www.amazon.com/Damaged-Extractor-Stripped-Remover-Queenti/dp/B07P668VWV/ref=sr_1_1_sspa?keywords=screw+extractor+kit&qid=1554384193&s=gateway&sr=8-1-spons&psc=1
​
{edit}
Forgot to say, if you already do have the drill bits, I would recommend #2 of the other 2 options, as those bits are double sided for more dual purpose work.
Cheap $12 bit set solves that problem.
Every geek should have these bits on hand.
https://www.amazon.com/gp/product/B0744BTGJ8/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Keep a set of something like this around for extra credit. Some security screws are deep-recessed:
https://www.amazon.com/Neiko-10224A-Security-Length-Premium/dp/B003X5KEUK/
>So I've given up and have booked it in to the workshop, but I just hate how I cant seem to accomplish the simplest of mechanical tasks, I'm really just venting here. fuck my useless mechanical ability, I just ruin things like screw heads when I try >:( >:(
Few pointers from a guy whose been wrenching for a long time:
So what do you do?
For those soft screws that love to strip: You use an impact screwdriver to break it loose and/or a good creeping lubricant to break the rust (PB blaster, Kroil).
Once you munge a screw up badly, you will need an extractor set. I recommend you learn this skill by deliberately ruining a few screws that yo have screwed into a board and use the set to get them out.
Here is one example of an extractor kit:
http://www.amazon.com/SpeedOut-Damaged-Screw-Extractor-Bolt/dp/B00IRL3WP4/ref=sr_1_1?ie=UTF8&qid=1414453572&sr=8-1&keywords=screw+extractor
My advice to you:
EDIT: Thanks for the gold, whoever sent that. Totally unnecessary but I appreciate it and gold helps reddit avoid selling out completely to advertisers. Cheers!
Honestly, if I were to buy another precision set, I'd go with this that I just found on Amazon. But if you just want the one type of bit, the name of what you're looking for is Torx bits.
ORIA Screwdriver Set, Magnetic Driver Kit, Professional Repair Tool Kit, 60 in 1 with 56 Bits Precision Screwdriver Kit, Flexible Shaft, for 8, 8 Plus/Smartphone/Game Console/Tablet/PC https://smile.amazon.com/dp/B01E16J6RQ/ref=cm_sw_r_cp_apa_i_.1fXCbBAV24QJ
Neiko 01925A Alloy Screw Extractor Solid Cobalt Left Hand Drill Bits Set, 10-Piece https://www.amazon.ca/dp/B000F9ANQW/ref=cm_sw_r_cp_api_Ac3xzbK2JWX51
$23.93 CAD (pesos).
I've had them for a year and they have held up just as good as my old set of snap-on ones.
I’d use a hand impact driver. ( and I have various air tools). They are about the only things that work on slotted screws like that. https://www.amazon.ca/TEKTON-2905-8-Inch-Manual-7-Piece/dp/B000NPPATS/ref=asc_df_B000NPPATS/?tag=googlemobshop-20&linkCode=df0&hvadid=292995173425&hvpos=1o2&hvnetw=g&hvrand=4683897586214222232&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9001423&hvtargid=pla-420785539586&psc=1
Edit( the force of hitting it with a hammer helps to drive it out)
I have liked this Tekton 27 piece set for a while. I mostly like it because it comes with both size pentalobe bits, if you're doing any apple repair stuff. It comes as part of their 135 piece set too, which I think is a good deal. Reach isn't very long is the only real downside.
Well once you get the screw out get yourself this amazing driver set
https://www.amazon.com/Wiha-Precision-Interchangeable-Slotted-Phillips/dp/B0000WTBO4?crid=2R9SYNV61YMX8&keywords=wiha+screwdriver+set&qid=1535862350&sprefix=wiha&sr=8-11&ref=mp_s_a_1_11
I have this set and absolutely love it and havent stripped a screw since getting it
Yea "Superdrive" is an old Apple term for the CD/DVD drive. I would get a magnetic screwdriver set like this one:
https://www.amazon.com/Vastar-Magnetic-Precision-Screwdriver-Smartphone/dp/B015F734P0/ref=sr_1_2?ie=UTF8&qid=1503856698&sr=8-2&keywords=magnetic+screwdriver
I dropped tiny screws multiple times and I definitely wished I had bought one myself when I did it lol.
Have you opened up a laptop to upgrade RAM or hard drive before? If not study a few YouTube videos to see if it's something you'd be willing to undertake.
I have a Wiha torx bit set from Amazon. It works perfectly well, but be aware that their torx bits don't carry a warranty, while their torx drivers do. I had one bit deform on a loctite-ed screw, but it takes some mighty force to break them like that.
For that last part, they make the hand impact drivers that does exactly this.
https://www.amazon.com/dp/B000NPPATS/ref=cm_sw_r_cp_apa_i_s1QPCbJW6THVR
There's a flat driver in that set, slot it into the slot, get a good grip, and hit it with a hammer. It simultaneously impact the bolt to break the rust while at the same time turn the bolt out.
I haven't had experience with the set you listed but I bought the Wera Tool check set about a year ago and it's great. Doesn't have the ability to spill, has all of the bits you would need for the most stuff and has some smaller sockets. I would highly recommend. It's 10 bucks more I think but that's not much over the years you'll have it.
Wera 056490 Tool-Check Plus Bit Ratchet Set with Sockets - Metric https://www.amazon.com/dp/B00I8MYMT2/ref=cm_sw_r_cp_apa_i_Naq4BbV4832TP
Edit: I will warn you that the screwdriver handle is very small. But if you need the extra torque to break the screw loose you can use the ratchet.
Amazon Prime > sex:
Seriously. After breaking a bolt or two on my Subaru I got fed up and bought a Makita metric bit kit. Where'd ya think I found it to get it to my house in < 3 days?
I have a 2008 BMW 335i. It has the N54 twin turbo 3.0L engine. I bought the car with 51k miles almost 5 years ago. It now has around 88k. Here's a rough list of what I've done so far:
In general, I will say that I've managed to DIY just about everything on this car, with the exception of the air conditioner evaporator. That I had done at my local A/C shop, but I've since seen someone on the e90 forums do it themselves.
I have had to buy quite a few tools and accessories along the way: a battery trickle-charger for the water pump bleed process, media blaster for the carbon cleaning, torx and e-torx bits/sockets, steering hub spreader for shocks (forgot this in the list above), impact hammer thing for brake rotors, extended low-profile jack, and so on and so on.
The most frustrating thing though was getting the BMW software to work. It's necessary for registering a new battery (so that it charges properly), or for installing new fuel injectors (they have individual flow rates and tolerances).
OH. I almost forgot. The waste gates on my turbos are rattling, and I'm out of warranty, so I'm looking at ~$1500-$2000 for new turbos some time this year. After that, it'll be new front wheel bearings. As soon as things stop breaking, I'll maybe have some time for upgrades and/or tune. =)
I should add, that the only reason I am even willing to do this stuff is because my wife and I commute to work together, so my car can be in pieces for weeks at a time if it needs to. Were that to change, I'd probably have to ditch this car for something more reliable.
Edit: After I finish all of the above, I'm going to polish and seal my headlights. I pretty much have to do this, since I'm sure as shit not going to pay $1k per light. >8|
I kind of got off topic. You asked about the feasibility of maintaining a car like this on your own. It's definitely possible, but it helps to know what you can expect down the road.
If you do a lot of Ikea, I would recommend getting a metric hex bit set for use with a power drill on the lowest setting to avoid over-tightening. You can also use the bits with a ratcheting screwdriver to make it easier and more ergonomic to drive the screens by hand. I use the drill to drive most of the screws in, and then finish by hand.
https://www.amazon.com/Titan-TIT16112-Metric-Hex-Piece/dp/B0043C55AG
id go back to the dealership but I have no desire to wait for their service dept to get to me nor to go all the way over there.
but you've def inspired me to try again. I just got the larger screw heads linked below (FFS I really need these anyway since I lose them so often).
I don't think I need power tools. honestly, you typically get more torque out of your arm than the power tools can put out.
https://smile.amazon.com/gp/product/B000RH3DW8/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&amp;psc=1
I bought this set years ago - Tekton 2830 - and it's my go-to for all small electronics.
It has the PH00 you need for the DS4 and also the TR9 bit if you would ever want/need to fully open up your PS4.
Also has a bunch of special bits that are needed for iPhones, Wiis, Xboxes, and pretty much any other small electronics.
I bought this tekton screwdriver kit and it's worked beautifully for everything I've needed so far. If you ever need more, the iFixit Mako is worth every penny.
I recommend http://www.amazon.com/Felo-0715732350-4-Inch-T-handle-Holder/dp/B000E62NIC
it is not ratcheting, but a good t handle is worth its weight in gold. I can put far greater pressure on stubborn bits with this. It might not be a replacement for you, but its a great addition.
FWIW I bought the set linked below when I needed to open up my Nexus 9 to replace the battery. It has quickly become my favorite kit for everything, in particular the hex bits are nice for not having to go hunting around for an allen wrench.
https://www.amazon.com/ORIA-Screwdriver-Professional-Precision-Smartphone/dp/B01E16J6RQ/
https://www.amazon.com/ORIA-Screwdriver-Professional-Precision-Smartphone/dp/B01E16J6RQ/ref=sr_1_3?ie=UTF8&amp;qid=1511977685&amp;sr=8-3&amp;keywords=oria
I work in a computer repair shop. We found this set last year and I highly recommend it. The build quality is great, the screwdriver is extendable, and all the bits are magnetic. They saved money on the part the bits sit in being formed plastic but I have not found another tool set that can match it for price to quality!
Edit: For spelling and format.
> As an aside, just bite the bullet and drill those damn screws out.
If the heads haven't been ruined yet, on a 2010 they should come out pretty easily with an impact screwdriver, which you can sometimes rent from auto parts stores.
The hollow sound definitely makes me think there's either a dented dust shield or a piece of debris stuck between the shield and rotor. However, I had a grinding noise sort of like this once that turned out to be one of the pad clips having slightly cracked and warped such that it could rub the rotor under braking.
You could always pick up a hand impact driver like this.
Also you could try trying to turn both directions. Sometimes all you need to do is get it moving.
Also you could use a propane torch to heat the bolt, and give it a few heat cycles.
This is also a nice wiha set. Wiha 75093 Micro Bit Set with ESD Safe Handles, Slotted, Phillips and Torx, 16 Piece
You could probably buy the two as a set on eBay for like $7. Or for double that you could get yourself a nice screwdriver set. This is the one I have.
They're considered by a lot of people to be the best out there. I have not used better ones and have not heard about better ones (but if there are I would love to know!).
Plus, they make a cool little kit version containig everything you'd need for knives. You can get away with a T6 and T8 for a while, but eventually you're going to start running into T5s, T7s, T9s, etc.
I bought a blue kit from Amazon a few months back and it has really came in handy, iPhone, switch, PS4 controller. It’s usually around 11-15 dollars and it comes in a blue or orange color scheme.
Something like this
ORIA Screwdriver Set, Magnetic Driver Kit, Professional Repair Tool Kit, 60 in 1 with 54 Bits Precision Screwdriver Kit, Flexible Shaft, for iPhone 8, 8 Plus/ Smartphone/ Game Console/ Tablet/ PC, etc https://www.amazon.com/dp/B01E16J6RQ/ref=cm_sw_r_cp_api_kscMAb2HB4TF1
Yeah, I used this kit on my joycons
https://www.amazon.com/gp/aw/d/B01E16J6RQ/ref=yo_ii_img?ie=UTF8&amp;psc=1
The one you're looking at looks pretty much the same.
I got this one a couple years ago for a specific job and have since found myself using it quite often. I actually just used it today! It works great. The day it breaks, I'll be buying another one immediately.
https://www.amazon.com/gp/product/B015F734P0/ref=oh_aui_detailpage_o07_s01?ie=UTF8&amp;psc=1
Used this one for about 2 years and I do all types of projects. There are plenty out there similar to this as well. Really great.
I've got something similar, but it's a Wiha: http://www.amazon.com/o/ASIN/B002PJ3IYE?tag=adapas02-20
Very easy to carry it around.
DeWalt power drill with bit set and angle adaptor. Perfect set for someone newly living on their own or for someone who just doesn't have their own power drill. The angle adaptor is particularly handy.
I've used both of these cheaper kits by ORIA and they've been fantastic! Not sure about UK availability, but might be worth a look.
https://www.amazon.com/ORIA-Screwdriver-Professional-Precision-Smartphone/dp/B01E16J6RQ/ref=sr_1_6?ie=UTF8&amp;qid=1536259932&amp;sr=8-6&amp;keywords=screwdriver+kit
https://www.amazon.com/ORIA-Screwdriver-Professional-Precision-Cellphone/dp/B01IVKPTP6/ref=sr_1_21?ie=UTF8&amp;qid=1536259932&amp;sr=8-21&amp;keywords=screwdriver+kit
For oil change, a standard socket set, a drain pan and maybe an oil filter wrench is all you really need.
Depending on what you’re doing with your carbs, you might invest in an impact hammer set like this one: TEKTON 2905 3/8-Inch Drive Manual Hand Impact Driver Set, 7-Piece https://www.amazon.com/dp/B000NPPATS/ref=cm_sw_r_cp_api_i_8VjCCbNQD190X. This will prevent stripping the screws during disassembly.
You might also want to do a valve check which will require some feeler gauges. If you wanna cheap out on a valve adjustment, you can use some sand paper to bring your shims into spec. Otherwise you’re gonna need to buy some replacement shims.
I have this set. Great little set.
Just bought this set to use to install some SSDs in my MBPs works great and cheap.
http://www.amazon.com/gp/product/B009MKGRQA/ref=oh_aui_detailpage_o04_s00?ie=UTF8&amp;psc=1
This is the one I use at work and it's great.
https://www.amazon.com/dp/B01E16J6RQ/ref=cm_sw_r_cp_apa_i_1V2XDbDHRJKVW
This is the kit I use. I highly reccomend it as having magnetic tips is a godsend and just having multiple sizes it general makes it so you don't strip the screws.
That... That's actually kind of terrifying.
I'd suggest going into the Apple store to see if they'll do anything. They have been known to replace computers out of warranty. Just tell them what you told us and hope for the best, I guess.
If that doesn't work out, you need to decide wether or not you should replace it with something else. This could be based on the specs of your computer. Does it run slow? Is it not doing what you need it to do?
If you're not happy with its performance anymore, I'd suggest going to a MacBook Air if you want to go portable. But if you just need it to work as a media center PC like your current MacBook is, just get a Mac Mini.
If you just want to replace the battery, check Amazon or your local hardware store. They're likely to have the screwdriver you're looking for. As to size, you'd be looking at a Tri-wing Y1, according to this article. The battery can be found all over the internet from plenty of reputable sources.
https://www.amazon.com/dp/B015F734P0/
Grab something like this,l have a couple just like this and they have almost everything you could need
Bought this set a while ago, very happy with it:
http://www.amazon.com/gp/product/B009MKGRQA/ref=oh_aui_detailpage_o03_s00?ie=UTF8&amp;psc=1
You'll need to go to a micro center or specialty computer store to get the screwdrivers, since they won't be available at a regular hardware store. You'll need a small phillips head for the back case and a star bit for the hard drive.
The difficult one is the tri-wing screwdriver that you need for the battery. This is a pretty cheap set that should cover all of the bits you will need
Hope this helps!
It's not the cheapest, but this Wiha set is what I use. A good torx set will go a very long way.
And Nano Oil.
I am reluctant to out myself by connecting /u/pbjamm to me IRL but I will gladly answer any questions you have. Here is a post I made when I finished the first half of the project. After talking to Bus Depot about this they suggested I might have to loosen the top corners of the tent up a bit. I undid them and pulled the top front as tight as I could and screwed it back down. Be sure to do that the first time as it was a total bitch to get that back up into place with the bottom connected already but not impossible. The extra 1-2cm was enough to get the bottom tacked down in the back. Working in the bottom back was by far the hardest part of the project. There is so little room to work I could barely see what I was doing. I highly recommend a ratcheting screwdriver for getting into the tight places. As I said before the finished project is tight, like a drum head. I was genuinely worried when I popped the top the first time, but it can stretch. I dont think I have any in process photos as I was too busy sweating and cursing to work the camera.
Is that flange metal or plastic?
I'd drip a little oil down there. PB blaster if you have it. WD-40 or light machine oil if you don't.
Then get a set of left-hand drill bits and pick a small one. Go slowly with the drill in reverse and try to get it to bite. If the hole gets ~1/4" down and it hasn't bit in yet, try the matching extractor. If that doesn't work, move up a drill bit size and extractor size.
Eventually it'll get to the point where you've just drilled out the whole screw--destroying the threads in the flange in the process. This is okay. If it gets that far, get a tap in the next larger size and replace the screw with that larger size. And get a stainless screw for sure. And wax or copper grease it to help keep it from freezing to the flange in the future.
I have found the ball end T-Handles to be capable of damaging the bolts. There is less surface for engagement and can lead to slipping and rounding the socket of the bolt. Hex bits and a bit ratchet are good for those hard to reach situations.
Will most likely only need one.
Should get this little guy though, super handy.
I cannot fathom what you are trying to describe, but maybe this tool will help?
I like extractor sets with reverse drill bits. Often they'll come out before you have a chance to use the extractor.
http://www.amazon.com/Neiko-01925A-Alloy-Extractor-Cobalt/dp/B000F9ANQW/ref=sr_1_1?ie=UTF8&amp;qid=1450035946&amp;sr=8-1&amp;keywords=extractor+set+with+reverse+bits
I got this one for half the price (originally just for the torx security bits) and it has held up well: https://smile.amazon.com/gp/product/B015F734P0/
And you absolutely need one of these!
TEKTON 2905 3/8-Inch Drive Manual Hand Impact Driver Set, 7-Piece https://www.amazon.com/dp/B000NPPATS/ref=cm_sw_r_cp_apa_i_BpUDDbSQB0RGV
I'd hit it with the penetrating oil (not sure what kroil is) a couple times waiting a few minutes in between to give it time to work.
Grab one of these as well. Is the old style impact driver. You whack the end with a hammer which is what turns the mechanism. It can go left or right so make sure you have it set to the correct one.
https://www.amazon.com/TEKTON-2905-8-Inch-Manual-7-Piece/dp/B000NPPATS/ref=mp_s_a_1_8?keywords=impact+driver&amp;qid=1550950294&amp;s=gateway&amp;sr=8-8
If those are standard size screws, you can change to Allen screws which can be easier to remove. Just make sure you don't over torque. And consider putting a little anti seize on there when installing.
A security bit set will have it. They sell a red case a lot of hardware stores with a ton of oddball bits. I got my kit for $10 at harbor freight.
edit: here is an amazon link https://www.amazon.com/100-Piece-Security-Ratcheting-Screwdriver-Vanadium/dp/B0744BTGJ8/ref=sr_1_3?keywords=security+bit+set&qid=1563728809&s=gateway&sr=8-3
You need an impact driver,
TEKTON 2905 3/8-Inch Drive Manual Hand Impact Driver Set, 7-Piece https://www.amazon.com/dp/B000NPPATS/ref=cm_sw_r_fm_apa_i_VVNsDbWB1P6WT
Some like this are cheap, nicer ones are out there but if you only need it once it might not be worth it.
I have had to use one on my first bikes brake reservoir, and 3 of my friends... they come in handy.
Dewalt makes two attachments you could look at.
This is their impact driver rated right angle attachment. I use mine fairly often on the job, and it's held up to hard use, including running 1" spade bits with my impact driver. It's not something I use often but it can really get you out of a jamb.
They also make this flex shaft one, but I don't own one so can't personally comment on its toughness. It looks lighter duty but it would fit into even tighter or awkward spots.
T-handle hex bit holders sound like they'd solve your issue.
I believe that the newer models uses a pentalobe 1 head, and yeah you can just screw them back in.
I would recommend buying this
A drill plus a right angle adapter
You can also use a much smaller drill, or even better a compact impact driver which is a lot smaller than even the smallest drills
TEKTON 2905 3/8-Inch Drive Manual Hand Impact Driver Set, 7-Piece https://www.amazon.com/dp/B000NPPATS/ref=cm_sw_r_cp_apa_i_rp.ZDb3MSFFNV
TEKTON 2910 1/2-Inch Drive Manual Hand Impact Driver Set, 7-Piece https://www.amazon.ca/dp/B000NPUJYE/ref=cm_sw_r_cp_apa_atUTBbTMV4HHR
I got this Wera bit set awhile back and it handles pretty much anything I need. I do have a separate DeWalt set of impact bits, that covers most of everything for my impact driver.
If you want long lasting screwdrivers, I'd highly recommend anything from Wiha.
I just picked up this little guy for my bag.
http://amzn.com/B002PJ3IYE
I picked up this tiny little thing which I like because it is literally as thin as you could make it, the back of the bit goes straight to the other side.
You will need a security bit set. If you go to a hardware store and show them this picture, they can get it for you. I think we found a set on Amazon for $14 or so.
Https://www.amazon.com/dp/B0744BTGJ8
Get this set: http://www.amazon.com/Wiha-79242-Selector-Torx-Piece/dp/B001US4RMI
It was recommended to me by /u/uberfastman and it's truly wonderful. It's the last torx set you'll ever need.
Do not get cheapo torx screws, they will screw everything up and cause you endless grief. Wiha or bust!
yes buy this for tbe back wheels
&#x200B;
https://www.amazon.com/gp/product/B000XYOUS6/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
OMG a cordless drill + set of metric hex bits make Ikea a breeze.
You can also buy proper hex drivers instead of using allen keys. Insert into your favorite driver/drill/handle of choice.
I don't get why people are content to settle for using the 3 inch long piece of hand-shredding Allen key that comes in the box to screw in something like 34 6 inch screws. Considering just about everything that is furniture in a box will end up using metric hex screws investing in one of these is worth every one of the $7 or so dollars it costs.
I mean come on people, even if you own an apartment keeping a couple basic tools around is a life necessity.
For next time :)
I like Wera tools. They aren't power driven, but they are really high quality and TOUGH.
I have one of these and it's my favorite thing EVER.
Thanks,
It's not to much of a hassle with only one wera handle.
I'm looking at getting these soon,
https://www.amazon.com/Wera-056491-Tool-Check-Ratchet-Sockets/dp/B016NC7NN0/ref=sr_1_3?ie=UTF8&amp;qid=1487731921&amp;sr=8-3&amp;keywords=wera+ratchet+set+screwdriver
A set like this?
These are the bits I got:
DEWALT DWA2T40IR IMPACT READY FlexTorq Screw Driving Set, 40-Piece https://www.amazon.com/dp/B00GMXFK3G/ref=cm_sw_r_cp_api_FtiXBb4BHHXY9
There is a manual impact driver that will work better than any electric driver. You basically put it on the screw then hit it with a hammer (preferably a dead blow hammer for best results) and it will literally break any screw loose, I’ve used one for many years in the navy on gun mounts when the screws were seized in place due to the rust.
The benefits are that it won’t strip the screws out and it’s cheap enough that you can pick it for about $20 or less at places like harbor freight.
The down side is that it can be hard to use sometimes when in a tight spot while trying to hit the head and it’s not as fast as an electric impact.
If I were you I would use the manual impact to break them loose then use the electric impact to speed up the removal. Here’s a amazon link so you can see what it looks like TEKTON 2905 3/8-Inch Drive Manual Hand Impact Driver Set, 7-Piece https://www.amazon.com/dp/B000NPPATS/ref=cm_sw_r_cp_api_i_pxIZDbMCYSWGE
I have 75992 and really like it.
There are several other kits on Amazon that are almost identical around the $10.00 mark, I've been using this one for ages. Still a good price for a solid kit, but nothing to jump at.
I got this set. https://www.amazon.com/gp/product/B0000WTBO4/ref=oh_aui_detailpage_o04_s00?ie=UTF8&amp;psc=1 because you never if you'll need something other than a torx, like with the Sebenza that uses hex.
Try using an impact driver, something like this:
https://www.amazon.com/dp/B000NPPATS/ref=cm_sw_r_cp_api_i_qzCBDb9KRYWE8
Start with tons of lube(I like Kroil and LiquidWrench), then use an impact driver with the correct size bit.
I would recommend this tool.
I like these a lot. They are quite handy because you can change the bits. https://www.amazon.com/Neiko-03044A-Ratcheting-Screwdriver-Close-Quarters/dp/B000XYOUS6/ref=mp_s_a_1_3?adgrpid=55650310786&amp;gclid=Cj0KCQjwkK_qBRD8ARIsAOteukD89A_TSwzoF-BxcrW5Uad5wt-F7E5qkiQd_HYTf4KygStUlugYLIoaAv_VEALw_wcB&amp;hvadid=274682060829&amp;hvdev=m&amp;hvlocphy=9030230&amp;hvnetw=g&amp;hvpos=1t1&amp;hvqmt=e&amp;hvrand=11339089793462780458&amp;hvtargid=kwd-301900027570&amp;hydadcr=20349_9348757&amp;keywords=ratcheting+bit+driver&amp;qid=1565309677&amp;s=gateway&amp;sr=8-3
something like this https://www.amazon.ca/Neiko-03044A-Mini-Size-Ratcheting-Screwdriver/dp/B000XYOUS6/ref=pd_rhf_gw_p_img_1?_encoding=UTF8&amp;psc=1&amp;refRID=AMBN4FAN905EVY73C3J5
You will need something like this. https://www.amazon.com/dp/B000XYOUS6/ref=cm_sw_r_em_apa_i_1YiTCbAXN1QC8
Can you get a right angle drill adapter to drill down from the attic?
Something like this: https://smile.amazon.com/DEWALT-DWARA100-Right-Angle-Attachment/dp/B00C0VSNKQ/
I believe the reason you're search isn't coming up with much is because it is the handles themselves which are magnetic, and it is passed through the bits. I would look into a kit like this, or possibly a magnetic ratcheting T handle and driver set.
http://www.amazon.com/dp/B015F734P0?psc=1
This ORIA Screwdriver Set, Magnetic Driver Kit, Professional Repair Tool Kit, 60 in 1 with 56 Bits Precision Screwdriver Kit, Flexible Shaft, for 8, 8 Plus/Smartphone/Game Console/Tablet/PC https://www.amazon.com/dp/B01E16J6RQ/ref=cm_sw_r_cp_api_i_hr0vCbWAS8NP4