Reddit mentions of Ontario Knife Co. 8846 Rat-1 Black Coated AUS-8 Stainless Steel 3.6 in Plain Edge Blade Nylon Handle 4-Position Reversible Clip Folding Knife for Outdoor, Tactical, Survival & EDC (Black)

Seconding that you should upgrade the knife.

There are a lot of good options, although I would recommend you shy away from the Gerber brand as they have some quality control issues, and have been running quite a few recalls (Including on that utility knife you're carrying). I was hoping to have a link for you to an article comparing their number of recalls versus several other companies but can't seem to find it currently. A quick googling though will show you what I mean.

For a list of nice knife options for less than $100 (and most around the $50 mark) check out some of these:

Spyderco Endura

Cold Steel Recon 1


Cold Steel American Lawman

Cold Steel Voyager

Kershaw Blur

Benchmade Griptilian

Ontario RAT 1 Folder

CRKT Heiho


I think these on top of the list /u/OC4815162342 provided should give you oodles of options!

Also if you want to upgrade that wallet of yours here are some options to look at.

www.Popovleather.com

Guy is also a redditor.

Leather Mimalist Wallets

Minimalist Wallets

For the record, I feel the same that the Cryo is too slippery - which is why I'm super glad Kershaw released a G10 version of it last year.

I also agree that the Tenacious is just a bit too big for EDC - and they do make the Persistence, which is a shrunken version of the Tenacious, with a 2.75 inch blade vs the Tenacious' 3-3/8 inch blade. If you wanna go even smaller, the Ambitious has a 2.25" blade. All 3 knives share a similar design (though the Ambitious is small enough that the proportions might look a little weird to some).

A few other knives of note that are standouts in the sub-$50 price range:

• CRKT Ripple - Ken Onion design with a more-traditional drop point blade, IKBS, 8Cr14MoV. Usually on most people's "Under $50" list.
  
  
• Kershaw Leek - Again, a little slippery and still Speedsafe but a slightly weaker torsion bar so not as forceful. Some people have issues with broken tips since they're a little thin, but this thing was the best under $50 when it came out.
  
  
• Ontario RAT 1 - At $25 this thing is a pretty great package, if not a little big. 3.5" blade, but it's AUS-8 if you don't like the 8Cr China steels (even if they are pretty similar).
  
  
• SOG Flash II - again, a 3.5 inch, AUS-8 blade. Assisted opening, but much less forceful than Speedsafe.
  
  
• The Kershaw Emerson CQC-6K has blown up since it's release and a lot of high speed low drag tactical types love it for EDC use. $25 makes it a pretty appealing choice and rock solid under $30.
  
  
• The Spyderco Delica 4 is just a touch over $50, averaging about $60, but it's also a go-to knife in the $50 for many people. VG-10 steel on this one is a big selling point.
  
  
• On the same hand, the Kershaw Blur is usually available for about $60, and for those looking for a big folder (seriously this thing is large) it's a great choice. Sandvik 14C28N as standard steel, also available with S30V for about $75.
  
  A few notes here
  
  
• You'll see a lot of sub $50 knives using 8Cr13MoV or 8Cr14MoV. The main difference is a little more Chromium in the 8Cr14MoV, leading to a little more corrosion resistance. A lot of people loved the Skyline, but there were a few issues with minor rust spots on the knives, leading to many companies switching to 8Cr14MoV for some of their knives (most of the budget Kershaws are 8Cr14MoV now).
  
  
• Kershaw has many many options for budget folders under $50, for all kinds of aesthetic tastes. The Chill, Thermite, Link, Oso Sweet, etc. I've owned a handful of Kershaws, and loved all of them, especially for the price.
  
  
• The 8Cr steels (13MoV and 14MoV) are pretty much on par with AUS-8, especially from CRKT, Spyderco, and Kershaw who all do a good job on their heat treats. There's a slight difference in hardness (3 to 4 HRC difference by most counts), but really they're nearly identical for all intents and purposes, mainly sharpening and edge retention. Some people just prefer AUS-8 because they don't like so called "China steel."
  
  
  ETA a few more links and some clarification of my still-awake-at-5am rambling.

i dont think your friend gave you a very good deal. For $30, a rat-1 would be a better investment.

http://www.amazon.com/Ontario-8846-Folding-Knife-Black/dp/B001E8EM2E/ref=sr_1_3?ie=UTF8&qid=1395251283&sr=8-3&keywords=ontario+rat-1

Titanium is not an ideal knife material. A stainless steel blade, even one made of cheaper steel will perform better than a titanium equivalent.

The knife you linked is not titanium, I think they are claiming the coating is Carbonitride Titanium but the blade itself is good old AUS 8. Which is a decent steel. If you like that knife, it would probably work just fine.

In this price range, I was going to recommend Kerhsaw, Benchmade and Spyderco. But, I just looked through the UK amazon store and your choices are really slim. So, I looked through the store and picked a couple solid choices.

https://www.amazon.co.uk/d/g6q/Ontario-Knife-Company-Folder-Plain-Folding-Blade/B001E8EM2E/

https://www.amazon.co.uk/Spyderco-Resilience-Plain-Folding-Knife/dp/B004AWOLV8/

If you end up further down the rabbit hole /r/knives, /r/knifeclub, /r/turtle/

Watch 25.49
Knife 24.00
Wallet 10.92
Flashlight 23.95
S Biner 1.78
Free Key 7.49
Total: 93.63

lmao those knives of quality and then the piece of shit mtech cant make this shit up. her eyou go my man, budget AND quality for ya:
https://www.amazon.com/Ontario-8846-Folding-Knife-Black/dp/B001E8EM2E
roughly the same size too
visit us in r/knives or r/fountainpens for more stuff (your pen could use an upgrade too)

Things in my EDC:

• Ontario RAT
  
  
• Hammer Anvil Leather Wallet
  
  
• Moto 360
  
  
• Nexus 6P

This is one of my EDC Kershaw Black Clash its a great little knife to eye

if you got 28$ i would def get this Ontario RAT