Reddit mentions of PBT Keycaps Backlit 109Key Set Doubleshot Cherry MX Key Caps Top Print with Keycaps Puller for 87/104/108 MX Switches Mechanical Gaming Keyboard (Gray White Combo)

This is a Magicforce 68 /w Happy balls pbt keys, both from amazon

https://www.amazon.com/gp/product/B077Q75JZ4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B072M53N2D/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

If you’re looking for the cap set, then here.

These are the keycaps I ordered.

AmazonSmile Link: PBT Keycaps Backlit 109Key Set Doubleshot Translucent Cherry MX Key Caps Top Print with Keycaps Puller for 87/104/108 MX Switches Mechanical Gaming Keyboard (Gray White Combo)

^Use AmazonSmile to donate 0.5% of your purchase price to a charity of your choice at no extra cost to you.

These are it! https://www.amazon.com/gp/product/B077Q75JZ4/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

Thanks! One word of caution, I have two of these keycap sets (one gray and one blue) and the space bar on the blue set does wobble a little bit (gray set is fine). Not a deal breaker by any means but worth mentioning.

https://www.amazon.com/gp/product/B01N5PZTKI/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B077Q75JZ4/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

Magicforce 68 with custom PBT keycaps
https://www.amazon.com/gp/product/B01872MCIA
https://www.amazon.com/gp/product/B077Q75JZ4

Ducky One RGB is the keyboard and here are the keycaps. https://www.amazon.com/dp/B077Q75JZ4/ref=cm_sw_r_cp_apa_i_1NYPCbDRBP5J4

I'd recommend different keycaps if you go with something that isn't backlit though

the keyboard is the "Gmmk Tkl" with keycaps simmilar to these " https://www.amazon.com/Keycaps-Doubleshot-Switches-Mechanical-Keyboard/dp/B077Q75JZ4?ref_=fsclp_pl_dp_2 "

CM Masterkeys Pro S with these caps =)

Assuming your existing keycaps are black, you could mix in some caps from a set like this, or this one is a whole white/gray/black set (but it's tenkeyless).

Monoprice also has a super cheap white keycap set if that helps.

https://www.amazon.com/gp/aw/d/B077Q75JZ4?psc=1&ref=ppx_pop_mob_b_asin_title , actually from Amazon. The gray keys suck but I was just after the white.

its E-Element Z-88 with outamu blue switches, with custom keycaps. I didnt switch all the keycaps since I liked this combo better than the all-white.

So can I get the GMMK, these switches and these caps would that work? On the GMMK website, it says cherry switches are not compatible with the LEDs, that's why I'm asking.

https://www.amazon.com/gp/product/B077Q75JZ4/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1 ?

It was just some random ones I found on amazon.

Link here

> https://www.amazon.com/dp/B077Q75JZ4?ref=yo_pop_ma_swf

those look nice, thanks!

It's a standard layout, so any mx keycap set would work great

I bought this one on Amazon

PBT Keycaps Backlit 108Key Set
https://www.amazon.com/dp/B077Q75JZ4?ref=yo_pop_ma_swf

I just bought a CTRL last weekend, but I hate the color of the keys that it came with. There are seemingly endless options for ultra-high quality keycap sets that would work well, but none that are backlit.

I really want some keycaps that take full advantage of the CTRL's RGB. More Specifically, I'm looking for some white keycaps. That probably makes it even harder. I bought these to try them out, and the quality was so bad I seriously debated if it would be worth the satisfaction of crushing them with a hammer rather than returning for a refund.

The feel of the keys is fine, and they are nice and thick. Problem is, over 20% of the keys have rough molding marks on the lower edges and bottom. Every key larger than 1x1 has very minor warping, with the space bar particularly horrible. Just unacceptable quality to be using, especially on a $200 board.

I don't think what I am looking for is particularly or unreasonably outlandish. Just white, backlit keycaps that aren't made out of pure Chinesium or cheap, thin ABS. No cringe-inducing gam3r font. I would prefer if the number row was horizontal to allow for the backlighting to be even. Under $100 for the set. That's it.

---
I know GMMK has some, but I don't really have any idea on the quality. They're ABS, but I don't really know how thick. From the pictures, they give off the vibe of stock OEM keycaps that you would instantly replace anyway.

---

I've seen the Vortex PBT+POM 104 key set recommended in the past, but it's out of stock on MK.com and Amazon. I don't really like that the number row is vertical either, since the numbers won't be illuminated as much as the symbols would be.

---

I know Vortex has a newer 126 key set, but I don't think it matters. People have said it's lower quality than the older PBT+POM set, and it's OOS every anyway as far as I can tell.

---

I have seen the Capturer Backlit Doubleshot PBT Keycap Set recommended on this subreddit a few times. It seems to have good reviews. Although I wouldn't be excited about waiting three weeks to see what mystery Chinese keycaps show up, I will if the quality is actually there.

---

This 109 key set from Amazon seller "Happy Balls" appears to be the same keycap set as the Capturer on AliExpress, which makes me concerned about both sets. The light bleed through the caps looks outright poisonous from the reviewer submitted images, and while the seller promises to replace any keycaps that arrive damaged or defective, the keycaps get pretty mixed reviews. The seller also has an 80% rating, and from experience anything under 98% means the seller basically gives you the middle finger and blows you off.

---

The most promising set I have found are the IKBC PBT Backlit Doubleshot 108 key set on Amazon. They get rave reviews on Amazon, domestic shipping, and they look pretty good illuminated from the user review images. The price seems to good to be true though, so I am a bit skeptical. I would love to know if anyone has any experience with this set.

---

Overall I can say it's more than a little disappointing. With today's ubiquity of RGB mechanical keyboards, SMD LEDs on PCBs, and backlight compatible switches, I would think we would have some higher end options for backlit keys by now. I would more than appreciate a little help finding a good set.

I just put these on my full size Alloy

https://www.amazon.com/Keycaps-Doubleshot-Switches-Mechanical-Keyboard/dp/B077Q75JZ4/ref=mp_s_a_1_7?ie=UTF8&qid=1540087057&sr=8-7&pi=AC_SX236_SY340_FMwebp_QL65&keywords=keycaps&dpPl=1&dpID=51liQTeB0JL&ref=plSrch

I think they look great!

It's the Ducky One TKL RGB White with these caps.

Thanks for the feedback! funnily enough I, this is also the white LED varient, it's just the lighting that gives it that blue look. The keycaps used are a cheap no name brand that can be found almost anywhere, the place I bought them from was Amazon, but that can also be found on eBay and AliExpress. Here's a link to the page I bought mine from: https://www.amazon.com/Keycaps-Doubleshot-Switches-Mechanical-Keyboard/dp/B077Q75JZ4/ref=mp_s_a_1_1?ie=UTF8&qid=1540665689&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=Happy+Balls&dpPl=1&dpID=51liQTeB0JL&ref=plSrch
Glad you like it.

I just grabbed them off Amazon (here) on impulse to try them out as I was getting tired of the Deck font. They seem quite decent for $30. The default LED brightness on the Hassium is a bit much and shines through the white keys pretty bad, but I just modified my default LED script to tone things down a bit.

Ordered this set from Amazon for my Pok3r: PBT Keycaps Backlit 109Key Set... https://www.amazon.com/dp/B077Q75JZ4?ref=ppx_pop_mob_ap_share

Everything is great but the space bar pops off the stabilizer on the opposite side where it’s pressed. Doesn’t happen with stock Vortex caps. Is there anything I can do or did I get a poorly made space bar keycap?

https://www.amazon.com/YMDK-Profile-Keycaps-Mechanical-Keyboard/dp/B07CYTLXRB/ref=mp_s_a_1_14?ie=UTF8&qid=1536068311&sr=8-14&pi=AC_SX236_SY340_FMwebp_QL65&keywords=pbt%2Bkeycaps&th=1&psc=1

https://www.amazon.com/YMDK-Through-Profile-Mechanical-Keyboard/dp/B078LVM49C/ref=mp_s_a_1_1?ie=UTF8&qid=1536068469&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=pbt+keycaps+108&dpPl=1&dpID=51Jj2p95c%2BL&ref=plSrch

https://www.amazon.com/Doubleshot-Translucent-Switches-Mechanical-Keyboard/dp/B077Q75JZ4/ref=mp_s_a_1_2?ie=UTF8&qid=1536068515&sr=8-2&refinements=p_85%3A2470955011&rps=1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=pbt%2Bkeycaps%2B108&dpPl=1&dpID=51liQTeB0JL&ref=plSrch&th=1&psc=1

It also depends on what keyboard you have. Not all full boards are the same. Some gaming brands have different bottom row layouts. (like razer and Logitech I think. Maybe even Corsair)

I forget the brand. But something cheap like this. Just some pbt double shot caps.

PBT Keycaps Backlit 109Key Set Doubleshot Cherry MX Key Caps Top Print with Keycaps Puller for 87/104/108 MX Switches Mechanical Gaming Keyboard (Gray White Combo) https://www.amazon.com/dp/B077Q75JZ4/ref=cm_sw_r_cp_apa_i_DupnDbVA6538F

GMMK TKL with Gateron Yellows and these keycaps https://www.amazon.com/dp/B077Q75JZ4/ref=cm_sw_r_cp_apa_i_ilnmDbDX72GY0