#16 in Health & Personal Care
Reddit mentions of RAW 79 mm 1 1/4 Hemp Plastic Cigarette Rolling Machine
Sentiment score: 33
Reddit mentions: 70
We found 70 Reddit mentions of RAW 79 mm 1 1/4 Hemp Plastic Cigarette Rolling Machine. Here are the top ones.
Buying options
View on Amazon.comor
- 79 mm cigarette rolling machine
- Raw 79 mm roller cigarette maker for 1 1/4 size rolling papers
Features:
Specs:
Height | 3.5 Inches |
Length | 1 Inches |
Number of items | 1 |
Size | 1 Count (Pack of 1) |
Weight | 0.0625 Pounds |
Width | 1 Inches |
One of these OP
Hey buddy. Im not the guy to talk to about THC levels and all that. But the prerolls are kinda expensive. If u were gonna use those regularly I recommend hopping on amazon and getting the RAW joint roller for 10$. It works well and will save u money in the long run
https://www.amazon.ca/RAW-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8/ref=mp_s_a_1_3?ie=UTF8&qid=1539797371&sr=8-3&pi=AC_SX236_SY340_FMwebp_QL65&keywords=raw+rolling+machine&dpPl=1&dpID=41nISmL1jVL&ref=plSrch
Practice is the only way to get good. I would recommend picking up a rolling machine such as this one. Saves a ton of time and headache.
My cop out suggestion is to get a joint roller on amazon. They take a little trial and error (the first time i used it [4] i made it explode and my weed got all over me) but once you get it right it makes perfect
https://www.amazon.com/dp/B002CNE9H8/ref=cm_sw_r_cp_apa_1h1sybB0M7NEH
I use one of those RAW Rolling Machines as I very rarely smoke joints but sometimes they're necessary for parties or events. My hand rolling technique is trash and they come out looking like a joint from the 70's so this setup is pretty great for uniform size and shape results.
You could always try a joint rolling machine and see if you like that. Im so bad at rolling, but using the machine works like a charm I find. An extra $2-3 just for them to roll it for you is quite steep when you think about it, and the machine pays for itself after 4 uses at that rate.
https://www.amazon.ca/RAW-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8
Answers.
I mostly vape. I also have a bong. I don't usually smoke canons/cones. I can roll by hand, and do, if I'm rolling something big, but for just myself and my girlfriend, I just use the RAW 1 1/4 papers and roller with the cellulose filters.
I do not use tobacco. Only smoke straight green.
I do rehydrate now, only in the last few months. Never used to. Always just picked up and smoked right out of the bag.
It does make it easier for rolling a burns a bit smoother IMO.
With the roller, you pack the weed in with a filter, close it shut, spin it and it will compress the weed to the same side/shape as the filter. Once you've rolled and compressed, slide in the edge of a paper, start spinning the roller and it will pull the paper in and wrap it around the weed and filter. Open it and you have a perfect "cigarette" every time.
When rolling cone, larger joints, cross joints, etc... I like to use something to roll the paper with, a pen, a rolled up sheet of white paper, etc... To make it easier to hold the shape. Roll the paper around whatever I'm using and stick it to create a hollow cone/tube. Then I slip a paper filter/tip from the top, down to the bottom and let it unroll itself a bit to fit the open, then fill the weed in from the top. Different people have different methods. My "hand roll" method is a bit unorthodox and "assisted" but a lot easier than fumbling weed everywhere. If that's. It an option, just use the fold in a pack of paper to hold and fill with weed, then tuck/roll a corner and spin it between your fingers, similar to what the roller does.
I prefer to use the rollers though.
If you want to pick some up to try for yourself, here's the links:
The simple RAW 1 1/4roller:
https://www.amazon.ca/dp/B002CNE9H8/ref=cm_sw_r_cp_apa_i_cKLXCbHRW125D
With 1 1/4 papers: https://www.amazon.ca/dp/B0066WMVPS/ref=cm_sw_r_cp_apa_i_bMLXCbGKAAPZE
With the slim, cellulose filters (a lot easier on the lungs): https://www.amazon.ca/dp/B06XH6QGCX/ref=cm_sw_r_cp_apa_i_kNLXCb5DB9S6T
Looks solid, nice job! I take the easy way out and just use a roller. RAW 79mm 1 1/4 Hemp Plastic Cigarette Rolling Machine https://www.amazon.com/dp/B002CNE9H8/ref=cm_sw_r_cp_apa_ysbuyb9KZCJWV
Grab a papers roller box for him. They can be used one handed and are cheap.
https://www.amazon.ca/Hemp-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8
I dunno why anyone would do it the hard way when these things make it a snap. Takes me ~15 sec to roll a joint with mine.
edit: For the 2-5 times a year I want to waste pot by passing a joint around. My bubbler or vape are far more efficient...
RAW 79 mm 1 1/4 Hemp Plastic Cigarette Rolling Machine https://www.amazon.com/dp/B002CNE9H8/ref=cm_sw_r_cp_apap_edMOkcAuvMmwN
I can't roll for shit either. This makes it simple and cake to roll perfect every time. Look into vaporizers! It will change how you use weed for ever!
Buy one of these.
But if you're wanting something now you can always use 2 pencils, wrap the paper around one, lick it and seal it like you're rolling up the pencil and then push the paper up the pencil and pack the weed into it with the second pencil until the paper is full. Then twist it at the ends and fly to the moon.
I dont know about cigarette injector, but before I learned how to roll joints I had bought a raw roller. It makes flawless joints and it's really quick. this is the one I got. You can get a 1 1/4 size and a king size. But now I roll my joints faster. It just takes practice man.
https://www.amazon.com/79mm-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8/ref=sr_1_3_s_it?s=hpc&ie=UTF8&qid=1481849549&sr=1-3&keywords=zig%2Bzag%2Broller&th=1
Or just type joint roller in amazon. They are super easy to use and make fat joints in a second or two
http://www.amazon.com/79mm-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8/ref=sr_1_1?ie=UTF8&qid=1381356746&sr=8-1&keywords=raw+rolling+machine
$3.50 on Amazon. Rolling machine, 4 pack of papers (128 papers) and 500 filter tips for a total of $13.00
https://www.amazon.com/RAW-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8
I believe he’s talking about something like this and if that’s the case these will make your life 100% easier if you can’t roll too good on your own
For cost savings, maybe try rolling your own. As I understand it, there are different levels of it, where the more skill you have the less complicated the tools are. You can freehand roll them, use a plastic machine
Or use an injection machine with filter tubes which are like cigarettes without the tobacco.
buy a pack of Randy's to learn with. The wire in it makes it easier to learn rolling technique. They arent the greatest but do the job and it has the built in roach holder. Or get this and a grinder and they work awesome
good idea! i just bought this to match these papers! and you put up a very valid point with the technicalities of the tubes vs thin rolling paper and the filters! thanks for ur input!
I can tell you the secret... for about tree-fiddie
And by that I mean buy the aforementioned rolling machine... it's just over 3.50 on amazon with free shipping.
https://www.amazon.com/RAW-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8
Get one of these. It’s life changing.
Like the other guy said, spoon pipes are alot less of a hassle, but if you insist on joints here's my suggestions:
Loose filters can be a number of problems. Too small of a filter being the easiest thing to blame it on. If you roll straights it can be hard to make the filter stay in, I usually try to keep the filter rolled as tightly as possible and pinch it between my fingers when rolling so it will expand to fit the paper when I let go, I sometimes rip gum tips off papers and use the glue to keep filters in when I'm having trouble. Alternatively if you roll straights, I find rolling cones really makes the filter sit better, as well as smoking better. If all else fails a raw rolling machine (I bought mine couple years back at my local headshop couple years back for something like 4$, and its never failed me) is a great investment for really cheap and wont break on you anytime soon. If you load one of these with about a .8 of rolling batch and a pretty fat filter it will roll you something that is extremely similar to a brand name somke in both look and feel. Good luck and happy rolling.
Anything "RAW" in that case. Without spending too much money I'd suggest a raw rolling tray, raw papers (1 1/4 size is what most people roll with), and some tips! If he has a difficult time rolling his own joints you could always get him a rolling machine. They're pretty cheap.
Rolling machine
Tray
I cannot vouch for the machine, but everything else is pretty basic. Pretty much everyone uses Raw papers these days. I prefer variety myself, but yeah.
It's the RAW 1.25 roller. You can get it here on Amazon
Yes but it will stink and also taste differently when you relight it.
I’m not sure about at Ganjika or the OCS but at the Wee Smoke Shop in dt Brampton you can buy rollers. The brand is Raw and it’s no more than $10. It’s a little contraption where you put the weed into it and a filter paper, then you just close it, feed a rolling paper through, give it a twist, lick the paper and you have a smokeable joint. (Not the prettiest or best roll but it’s fast and small and convenient). Here’s a link to it on Amazon
Almost everybody had one of these, tho
Good luck m8
If I don't feel like rolling, I use one of these. Cheap, and effecient.
get a rolling machine:
http://www.amazon.com/79mm-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8
I have one of these and it works like a champ.
Ever used on of these? Cigarettes are horrible for your circulation which won't help your dexterity. Do you like rap music? You could get yourself an MPC instead of a guitar and make some beats or something...
https://www.amazon.com/79mm-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8/ref=sr_1_2_a_it?ie=UTF8&qid=1494087142&sr=8-2&keywords=rolling+machine
https://www.amazon.com/RAW-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8
I got you 👌🏻
There was a thread not too long ago (maybe an hour) talking about some tips and tricks for rolling. If you like me and can't roll to save your life, pick one of these up.
https://www.amazon.ca/RAW-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8
Try using a cigarette roller. My thumbs are shot and this makes it super easy.
As far as rolling a joint goes if you don't have the patience to master doing it freehand you can always get a rolling machine. They are sized to fit a particular size of paper so be sure the roller and papers are the same size.
Trade-Ctore RAW 79 mm 1 1/4 Hemp Plastic Cigarette Rolling Machine
how to video
Well, mine is Raw, I got it from Rock universe. Most headshops should have them. Or buy from Amazon - https://www.amazon.ca/RAW-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8
ninja edit: OCS might have some under accessories
Joint Roller
check this out, I don’t use it but I heard it gets you perfect joints every time!
I highly recommend a Raw “cigarette” rolling machine! Once you get the hang out of it, there’s no turning back!
Easier to get a rolling machine. https://www.amazon.ca/Hemp-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8
you twist it in case you dont plan on smoking it within an hour or so and you are worried about it falling apart.
looks pretty loose so it was a good idea for him... goodtry/10 bro
maybe think of investing in a roller-
http://www.amazon.com/79mm-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8
Buy a rolling machine. https://www.amazon.com/RAW-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8/ref=mp_s_a_1_6?keywords=cigarette+rolling+machine&qid=1564366234&s=gateway&sr=8-6
Not really. The stuff you're thinking of putting in it is typically more moist and doesnt pack as well in a machine of this caliber. Save the $70 bucks and maybe go with something like this instead.
http://www.amazon.com/gp/aw/d/B002CNE9H8/ref=mp_s_a_1_3?qid=1449539448&sr=8-3&pi=SX200_QL40&keywords=cigarette+roller&dpPl=1&dpID=41m6FQ7ldPL&ref=plSrch
Although hand rollies still work better i think.
if you're gonna get one i recommend getting tips. helps keep the grass in and lets you burn all the tree without leaving a roach. you can get bigger ones too and package deals with all of it. also remember to roll towards you and not away.
I've never used them. If you're not familiar with hand rolling I recommend this like thing.
Don't try to overstuff it and you'll make perfect little cigarettes. Use 1.25 papers.
It always takes awhile for me, never could roll a decent one quick.. I picked this up a few years ago. Perfect every time. https://www.amazon.com/dp/B002CNE9H8/ref=cm_sw_r_cp_awd_OAXPwbAFVSDAH
Try a rolling machine (Amazon). I've given up on hand rolling. Honestly even the rolling machine was a pain in the ass for me to get right (took me like 20 attempts after watching a REALLY simple youtube video) but eventually I got it right.
The thing I figured out was that the herb needs to be somewhat dense for it to roll right. I only like to smoke a little at a time so I didn't want to fill the entire joint.
I fixed that by cutting a piece of a plastic drinking straw and stuffing it with rolled up filters. I put the straw at one end of the roller, and the (actual) filter at the other, that way I can pack herb into the open area tightly without using too much.
Now that the herb is packed in nice and tight, I roll it up, seal it, and kind of pinch the straw out of the joint and twist it up. They come out a little pathetic looking but who gives a shit? They smoke really nice and it's the perfect amount.
If you're interested I can take a few pictures to illustrate what I mean about the straw.
Those cheap little rolling machines really work.
Example ----> www.amazon.com/79mm-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8
Maybe buy a grinder and a vape. Or even cheaper, a grinder and a rolling machine like this
I cheat and use a cigarette rolling machine, like this:
http://www.amazon.com/79mm-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8
Plus the tips they have in the "frequently bought together". Perfect cylinders every time, no burnt fingers or lips.
I can't stress how awesome the automatic cigarette rollers are. They are 5 bucks, and worth their weight in gold.
it takes about 2 minutes to learn how to use it.
every joint you roll is perfect, cylindrical, tight, same diameter of a cigarette. and because they are so perfect, they look a lot more like a cigarette.
edit: here is the one i have
http://www.amazon.com/79mm-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8
That's cool, no judgement. But a rolling machine like this one. https://www.amazon.com/RAW-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8/ref=sr_1_1?keywords=rolling+machine&qid=1572918887&sr=8-1
A pack of papers and a Glass crutch are minimal effort for a much more powerful and cheaper experience. https://www.amazon.com/Premium-Rolling-Genuine-Cigarette-Straight/dp/B07BMXR6GC/ref=sr_1_3?keywords=Glass+Cigarette+Rolling+Filter+Tips&qid=1572918993&sr=8-3
The smallest amount of effort will afford you a better experience, that's all I wish to point out.
Idk about blunts, but I do know joints.
For joints, the #1 mistake that I've learned not to make is to roll it/pack it too tightly. If you roll it or pack it too tightly, that joint will be running like a mf. It took some time for me to feel what is an overly packed joint.
Basically, if you squeeze it and it doesn't budge nearly at all from how tight it is, it will start running.
To avoid this problem, I do this: After I roll the joint, I twist 1 end. If I feel that it is too tight, I start rolling the joint in my fingers to loosen it, it's okay if a little weed falls out. It is kind of difficult for me to describe when a joint is not overly packed/too tightly rolled but also not "loose" either.
Again, basically if your joint is so tight that it feels like a candle stick and will not "give" when you squeeze it, you need to do the loosening technique. An under-packed joint should be obvious as weed will be able to slide up and down the joint.
Here is the joint roller that I use. It took some practice to learn how to roll good joints that weren't too tight or too skinny, but once I learned how to roll joints well with this, I never rolled by hand again.
You should get a joint/cigarette roller like this one . It’s great for shaky hands because it does all the work for you. They are also cheap. One of these would help you so much!
Amazon has them for less than $5, and my local tobacco shop has them for less than $3. Amazon Raw Rolling Machine
you can also just get filters and papers, and use a rolling machine: https://www.amazon.com/RAW-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8/ref=sr_1_3?keywords=rolling+machine&qid=1558931853&s=gateway&sr=8-3 put the filter in at one end and put the flower in the rest...
Maybe try one of these little rollers if you want to start rolling your own. Takes about a minute to make a perfect rollie without a fuss... I like to pack mine extra tight so they go out if I don't keep puffin.
I use a grinder. The buds don't break up enough for me when I do it by hand. Use a RAW rolling machine to roll joints. They burn a lot better that way because I can't roll a joint on my own to save my life. Lol
If you smoke regularly then I recommend you get this https://www.amazon.com/dp/B002CNE9H8/ref=cm_sw_r_cp_api_sqlqzb3NDCH8J. Buy some Elements King size Papers and a pack of tips. You'll save a lot of money!
I would advise you to pick up a Raw rolling machine and your own bud. Pre rolls can be made with shitty floor weed much like fake cigars are.
Not saying they all are, but some definitely are made with crap quality and its much easier to make pinners with that machine.
Just get a roller.
Bought mine for like 5 bucks from a corner store.
Trade-Ctore RAW 79 mm 1 1/4 Hemp Plastic Cigarette Rolling Machine https://www.amazon.com/dp/B002CNE9H8/ref=cm_sw_r_cp_apa_vMdEzbS3HPJF6
Just get a cigarette roller. They are cheap, easy to use, and roll a perfect joint every time.
https://www.amazon.com/dp/B002CNE9H8/ref=cm_sw_r_cp_awdb_t1_whtmDbKRM9TMZ
This probably wouldn’t work for dry papers but they do make really cheap machines just for that. They come in many different sizes for typically under $10. It’s the only way I can roll lol
RAW 79 mm 1 1/4 Hemp Plastic Cigarette Rolling Machine https://www.amazon.com/dp/B002CNE9H8/ref=cm_sw_r_cp_api_i_Vf0nDbMJ06HET
Here's a RAW joint roller:
https://www.amazon.com/79mm-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8/ref=sr_1_1_a_it?ie=UTF8&qid=1467441570&sr=8-1&keywords=raw+roller
They also have one that's 110mm
http://www.amazon.com/79mm-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8/ref=sr_1_1?ie=UTF8&qid=1464044235&sr=8-1&keywords=joint+roller
They make little plastic ones that you can get anywhere you buy papers. They come in different lengths, and it's best to get the one that matches the paper you like. Here's one example:
https://www.amazon.com/Hemp-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8/ref=sr_1_3_a_it?ie=UTF8&qid=1511527866&sr=8-3&keywords=rolling+machine
It's hard to explain until you have the machine in your hands, but you can roll just as tight or as loose as you want by applying a little finger pressure to the bars. You'll see.
Once you get the hang of the machine, you can do the same thing with a dollar bill. Again, its hard to explain, but once you see it happen if front of you it's easy.
This is the one I got and here is a larger one.
Problem solved