Reddit mentions: The best rivets
We found 13 Reddit comments discussing the best rivets. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 10 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. M0.9(d)2.5(L)mm 0.9mm Metal Elements Copper Hollow Rivet Double-sided circuit board PCB vias nails
- 1000pcs rivet nuts.
- Size:M0.9(d)2.5(L)mm.
- Material:H59 environmental protection brass.
Features:
2. Riveters Gun,LineWinder Blind Rivets Pop Rivet Gun, Hand Repair Tools Riveter, Heavy Duty Riveting Tool With Rivet Heads and Wrench, Rivet-Nut Tool For Metal, Wooden and Plastic Yellow
- Use the Rivet Gun for die cast metal, automotive, and duct work applications. It features a black wrinkle finished die cast steel body with drop forged handles
- Extra four interchangeable nose pieces and wrench stores on handle
- Comfortable vinyl grip for easy no-slip operation
- Long handle makes riveter easy to squeeze. Uses 1/8", 3/32", 5/32" & 3/16" diameter Steel & Aluminum Rivets
- Limited Lifetime Warranty
Features:
Specs:
Color | Yellow |
3. SNUG Fasteners (SNG474) 1000 Qty Aluminum Blind Rivets Bulk (#6-4) 3/16" Diameter x 1/4" Grip
- #6-4 (3/16" Diameter, 0. 188" - 0. 250" Grip)
- Aluminum Rivet And Steel Mandrel
- Recommended Drill Size: #11 (. 194)
- Bulk Package Of 1000 Blind Rivets
- Ideal For A Wide Range Of Applications
Features:
Specs:
Color | White |
Height | 4 Inches |
Length | 4 Inches |
Number of items | 1000 |
Weight | 0.99 Pounds |
Width | 4 Inches |
4. S&R Industriewerkzeuge Single-Hand Blind Rivet 2.4-5.0Mm Profile 250 Mm For Steel, Stainless Steel And Alu Rivets; With Durable Construction Made Of Die-Cast And Aluminum Housing
- DAlu, mm: 2.4, 3.0 / 3.2, 4.0, 4.8 / 5.0 DSteel, mm: 2.4, 3.0 / 3.2, 4.0, 4.8 / 5.0. Stainless steel, mm: 2.4; 3.0; 4.0 mm. Weight 512 gr, length 254 mm
- one-hand blind rivet tongs, incl. Mounting key and return spring for 1-hand operation
- Material: aluminum housing, steel handles, ergonomic handles, isolated with rubber plastic
- Blind rivet pliers for precise and safe use, resistant, in industrial quality
- Safe construction for durability, suitable for: metal, aluminum, leather, wood, plastic and textile
Features:
Specs:
Color | Balue Griffe |
Height | 0.9448818888 Inches |
Length | 9.9999999898 Inches |
Weight | 1.1464037624 Pounds |
Width | 3.1102362173 Inches |
5. 25 Nylon Expansion Rivets 1/4 Hole Dia. 2-3/16 Length by Clipsandfasteners Inc
Sold on Amazon
6. 100 Qty 304 Stainless Steel Blind Rivets (#6-6) 3/16" Diameter x 3/8" Grip (BCP179)
#6-6 (3/16" Diameter, 0.313 - 0.375 Grip)304 Stainless Steel Rivet And MandrelRecommended Drill Size: #11 (.191)Package Of 100 Blind RivetsPerfect For Corrosive Environments
Specs:
Height | 0.5 Inches |
Length | 4 Inches |
Weight | 0.93 Pounds |
Width | 6 Inches |
7. uxcell 5mmx22mm Round Head Semi-Tubular Rivet Fastener Silver Tone 5pcs
- Country of Manufacture: CHINA; Material: Metal
- Net Weight: 18g; Package Content: 5pcs x Semi-Tubular Rivet
- Main Color: Silver Tone; Product Name: Semi-Tubular Rivet
- Total Size: 9 x 23mm / 0.35" x 0.9"(Head Dia.*Total L); Shank Size: 5 x 22mm / 0.2" x 0.87"(D*L)
- Inner Dia.: 3.9mm / 0.15"
Features:
8. Racer's Speed Shop Black 3/16" Large Head Tri-Fold Exploding Aluminum Mandrel Pop Rivets 50 Pack
Specs:
Color | Black |
Height | 1.25 Inches |
Length | 5 Inches |
Size | Aluminum |
Width | 4 Inches |
9. Copper Rivets Plus Washers 3/32 X 3/16 Leather Fastening 50 Ps
You get 50 solid copper flat head rivets and 50 washersSee the example how it looks attached to leather on both sidesI use the leather hole maker, baby ball peen hammer on and plastic mallet
10. DZUS SNOOPY TOOLS
- This link only sells OEM profile Keycaps,no keyboard included.There is a puller presented in package.
- This keycap is made of 90% PBT.The thickness is around 1.5mm.The printed one is laser etched.The blank one is no legend
- This keycap is compatible with most standard ANSI MX switches keyboard whose bottom modifier key is 1x6.25u 7x1.25u.Space is around 11.7cm.
- It's not compatible with Corsair Razer keyboard.64 68 75 84 96 keyboard can't use it as well
Features:
🎓 Reddit experts on rivets
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where rivets are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
You can buy it i would imagine but where's the fun in that.
Buy This Sheet
These Rivets
For minimal expense it can mostly be worked with hand tools.
A hacksaw, a hand file, a riveter. Drilling the hole for the rivet will require a power drill though. A hand drill would be a pain in the ass.
This is theoretical, so if anyone else has any better ideas I'd listen to them. HAHAHA.
I grabbed a cheap Rivet Gun from Amazon. On advice from the growmau5 YouTube channel. It took all of 5 minutes to learn how to use. Way easier than nuts and bolts. Downside is once you rivet two things together, it's more or less permanent. But, when using aluminum, that's not a huge deal.
edit: Should note that you don't need a rivet gun, or any kind of tap set. The heatsinks come pre-tapped, and include all the hardware you could possibly need. All you would have to do is drill holes in the aluminum pieces to secure them to each other (any drill bit will be harder than aluminum, and will drill through easily) then use a couple dollars worth of nuts and bolts to secure the thing.
You mean like the plastic ones? I wrapped myself around a gutter and had to take my stock rear fender off/put it back on. All I needed was these three generic Chrysler plastic pins:
(1) Chrysler: 6030441 https://www.amazon.com/gp/aw/d/B0040CYSUW?psc=1&ref=yo_pop_mb_pd_title
(2) 25 Nylon Expansion Rivets 1/4 Hole Dia. 2-3/16 Length - these are hard to place without a river pusher, but I managed to do it without using needle nose pliars.
(https://www.amazon.com/Expansion-Rivets-Length-Clipsandfasteners-Inc/dp/B0040CZ3TW/ref=pd_aw_fbt_263_img_3?_encoding=UTF8&pd_rd_i=B0040CZ3TW&pd_rd_r=b82e8272-e9dd-11e8-a1cb-bd18f79b5821&pd_rd_w=7ZdmU&pd_rd_wg=gjeoA&pf_rd_i=mobile-dp-sims&pf_rd_m=ATVPDKIKX0DER&pf_rd_p=b98fa1a4-6e6e-4981-835c-7fb29e0f4dd2&pf_rd_r=TB987ENEC86RB33HG8W1&pf_rd_s=mobile-dp-sims&pf_rd_t=40701&psc=1&refRID=TB987ENEC86RB33HG8W1)
(3) GOOACC 036372 Rocker Moulding Clips
https://www.amazon.com/GOOACC-036372-Rocker-Moulding-Clip/dp/B008FUAUI4/ref=pd_aw_fbt_263_img_2?_encoding=UTF8&pd_rd_i=B008FUAUI4&pd_rd_r=b82e8272-e9dd-11e8-a1cb-bd18f79b5821&pd_rd_w=7ZdmU&pd_rd_wg=gjeoA&pf_rd_i=mobile-dp-sims&pf_rd_m=ATVPDKIKX0DER&pf_rd_p=b98fa1a4-6e6e-4981-835c-7fb29e0f4dd2&pf_rd_r=TB987ENEC86RB33HG8W1&pf_rd_s=mobile-dp-sims&pf_rd_t=40701&psc=1&refRID=TB987ENEC86RB33HG8W1
Is it something like this you used? https://www.amazon.de/dp/B0073RU3BY
It looks homemade with flanged aluminum pop rivets, like these.
https://www.amazon.com/dp/B07PQS53VN/ref=sspa_dk_detail_1?psc=1&pd_rd_i=B07PQS53VN&pd_rd_w=rJSOj&pf_rd_p=8a8f3917-7900-4ce8-ad90-adf0d53c0985&pd_rd_wg=F4Oe3&pf_rd_r=87HV6RE8ABA7CMDN47A7&pd_rd_r=d681828f-a6f9-11e9-85ce-aff8187a0e51
I think this might be the correct one https://www.amazon.com/gp/product/B0040CZ3TW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1. I used these for my fender flare but there is also another type of clip depending on what part you are attaching if i remember correctly.
This.
Description
Three different sized radii to match the slots in various 1/4-turn fasteners. Non-slip plastic grip. Handy, durable tool for the Dzus fasteners found on aircraft panels and race cars. Fits three different sizes of fasteners. Made in the USA from high quality stainless steel!
maybe try copper rivets with washers and a set tool for them? sometimes called saddle rivets. for example http://www.amazon.com/Copper-Rivets-Washers-Leather-Fastening/dp/B011W08OMM/ref=sr_1_13?s=industrial&ie=UTF8&qid=1464217707&sr=1-13&keywords=copper+rivet
Pop/blind rivet
tubular rivet fasteners
Pop rivet before it's popped.