Reddit mentions: The best robotic products
We found 15 Reddit comments discussing the best robotic products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 11 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Double Robotics Telepresence Robot for iPad Tablet First Generation (Discontinued by manufacturer)
- UPC: 859025004001
- Weight: 9.920 lbs
- This model is discontinued
Features:
Specs:
Height | 49 Inches |
Length | 5 Inches |
Weight | 14 Pounds |
Width | 10 Inches |
2. HC–SR04 Ultrasonic Sensor - 2 Pack
- Range: 2cm - 400cm
- Power: +5V DC Current: 15mA
- Effective Angle: <15 degrees
- Dimension: 45mm x 20mm x 15mm
- Trigger Input Pulse Width: 10uS
Features:
Specs:
Height | 0.8 Inches |
Length | 1.75 Inches |
Number of items | 3 |
Width | 0.5 Inches |
3. ARCELI STM32F103C8T6 ARM STM32 Minimum System Development Board Module STM32F103C8T6 Core Learning Board for Arduino
- Mineral based sunblock made with natural ingredients, vegan. Its active ingredient, Zinc Oxide, is considered the most effective sunscreen.
- Physical sunscreen, doesn´t contain chemicals. 50 SPF High protection against UVA and UVB rays.
- Recommended for outdoor sports (surf, running, cycling etc) High protection for sensitive areas like scars, spots, redness
- Thick texture, warm it with the fingers or use a sponge. Light-colored (medium tone of skin). Water resistant for up to 80 minutes.
- Coral reef safe (non-nano ingredients). Biodegradable. Made in Galicia, 50g (travel size)
Features:
4. Tracked Robot Smart Car Platform with Damping Effect System Metal Tank Chassis with Powerful Dual DC 9V Motor for Arduino Raspberry Pi DIY Kit STEM Education, Easy Assembly (11.0x9.8x4.5inch, 3.28lb)
- Damping Effect - Shock absorber spring achieve damping effect. Widely suit for road surface
- Aluminum Alloy Car Platform - offer outstanding appearance, higher durability and stability
- Dual DC 9V Motor is equipped with a speed feedback circuit and Hall speed. Dual motor offers higher power and speed. NOTE: Battery is not contained
- Flexibility - go forward, go backward, turn left, turn right, turn around
- Easy to assembled by yourself and easy to learn Arduino Raspberry Pi DIY.
Features:
Specs:
Color | # 3, Black ( Damping Effect) |
Height | 2.1 Inches |
Length | 12 Inches |
Weight | 3.37 Pounds |
Width | 8.7 Inches |
5. Turbo Drone Quadcopter - Awesome Indoor / Outdoor Quadrocopter - Do 360? Flips!
6. Transparent Clear Case | Soft TPU Bumper Drop Protection | Wireless Charging
Specs:
Is adult product | 1 |
7. 2 Pin JST (PH) Extension Cable - 50cm
- Range: 2cm - 400cm
- Power: +5V DC Current: 15mA
- Effective Angle: <15 degrees
- Dimension: 45mm x 20mm x 15mm
- Trigger Input Pulse Width: 10uS
Features:
8. Walkera GA-006 Dual 1 Cell USB LiPO Battery Charger RC Drone Quadcopter WK008
- OEM Replacement Part
- Uniform Dimensions
- High Quality
- Fits Walkeras FPV Ladybird V2, Ladybird V2, InfraX, V120D02S, Mini CP, Genius CP V2, Super CP
Features:
Specs:
Height | 4 Inches |
Length | 4 Inches |
Weight | 0.02 Pounds |
Width | 1 Inches |
9. Hexnub Anki Vector Robots Trax-Pack Accessory Treads for Remote Control Stem Robot Toys Add Traction and Personality Enhance Style and Gameplay Three Awesome Colors
10. 4WD Robot Chassis Kit with 4 TT Motor for Arduino/Raspberry Pi
Smart 4WD robot car chassis with 4 TT DC Gear Motor, horsepower fullness, Operating voltage: 3V - 12V.DC Motor Reduction Ratio: 1:48 (3V Motor No-load speed 125RPM).Robot chassis kit made of PCB material, Size:256*150*2MM, Maximum Load 500g.With many circuit mounting holes, users can add some micro-...
Specs:
Height | 2.5590551155 Inches |
Length | 10.0787401472 Inches |
Weight | 0.661386786 Pounds |
Width | 6.299212592 Inches |
11. Gowe 6 DOF Programmable Clamp Robot Arm Kit
Need Patience to download the software and instructions before use it. Robotic arm that everyone is familiar, the hospital's surgical robot, the factory in the industrial manipulator, even though you've seen on TV or in the field, but its large body and high price, so that we stay away, and now We d...
🎓 Reddit experts on robotic products
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where robotic products are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
I like uattend.com with a fingerprint scanner for timeclock. Other than that, I'd setup something to measure KPI's like the other person said, require the managerment to provide spreadsheets and reports. Setup dropbox or Google docs for sharing. Plus a solid video chat setup like a conference room with TV and camera for staff meetings, use Skype or Gotomeeting. I don't know if something like this would work but they're in some offices now https://www.amazon.com/Double-Robotics-Telepresence-Robot-Tablet/dp/B00K2Z8LRW. Also I really like Square as a POS and their apps are great for reporting.
If you want to use any custom firmware then don't upgrade. The latest upgrades encrypts the bluetooth which makes 3rd party apps and firmware flashing impossible.
DRV 155 is fine but as its a clone board BMS and BLE have to be flashed using the ST-Link method.
The documents say soldering but there is no need if you buy some pins for the ST-Link as clone motherboards have holes for the pins so that they are easy to flash.
Get ST-Link Get Pins
Put pins in ST-Link connectors
Plug ST-LINK into PC, set up ST-Link drivers and software
Download firmware needed to PC
Plug ST-Link leads into the correct holes on the clone board
Run the ST-Link software to flash the board
Done
Details are here for the whole thing including great firmware for heavier guys or for people faced with hills. Its the V9 firmware at the bottom of the page:
https://rollerplausch.fandom.com/de/wiki/Pro_Dashboard_und_CFW_Installation
Here is the link for flashing the board with an ST-Link (follow the Pro guide):
https://www.instructables.com/id/Firmware-Downgrade-M365/
And here is a link to a guy who did what I did
https://scootertalk.org/viewtopic.php?t=2600
Here is the ST-Link I used
https://www.amazon.co.uk/gp/product/B079128QP1/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&amp;psc=1
And here are the pins I used
https://www.amazon.co.uk/gp/product/B077MJKCVT/ref=ppx_yo_dt_b_asin_title_o05_s01?ie=UTF8&amp;psc=1
Good luck if you use the CW Firmware hills are a problem no more!
Hello :-)
You can use a simple (leaver) switch when it bumps into something (or indeed use the flex sensor), but better would be a ultra-sonic sensor ($1 at Aliexpress or eBay, $5 at Amazon). Another method is something like a tcrt5000 infrared distance sensor, but it's vulnerable to ambient light. You could do this with the photocell as well (or line tracking).
Also ad a $1 9g servo to pan the sensor :-)
What parts do you have besides the kit?
TL/DR: Just get started! All robots need basics coms, motors etc... Learn to control those and you'll find out exactly what you want to build after.
I am in the same boat, decided to build and program a robot from scratch. What the robot should do, I still dont know but I figured I should just get started with the basics; getting a processor communicating with a Motor and some basic sensors
Since I mostly wanted to get experience with hardware/software interface I got a raspberry pi and a robot chassis kit and started there.
Found a really good guide book that shows how to hook up a pi to sensors, motors, etc ... ISBN-13: 978-1119188681
Bought a chassis kit https://www.amazon.com/dp/B077HMY3YK/ref=cm_sw_r_cp_apa_i_Y.N5Ab2GXWV62
I also added a couple of arduinos sensors to play with.
Some quadcopters are called drones by their own manufacturer, which I gotta say, sounds pretty BADASS!!! Check out this TURBO DRONE!
They don't, but I accepted the challenge of finding a way to get one with bitcoin. I can buy an Amazon.com gift card at Gyft.com using my bitcoin and purchase it. It doesn't matter who takes my bitcoin as long as I can get what I want with them. Oh, and Gyft.com gives me 3% back on my bitcoin purchases).
I asked massdrop support and they said any 2x3x4 mm square led would work and gave me this link note board only supports single color, not RGB leds
this could help, but I recommend using the splice method.
Get the Hubsan x4(107L). It is AMAZING. Don't be fooled by its small size and inexpensive price. I would wager it goes over 25mph, can do flips, and is amazingly tough. I crash quite a bit while messing around and it always amazes me what it will take. So far since 7-11 I have broken 2 propellers and lost 1.
I would recommend getting the bigger batteries and some extra propellers - especially if you plan on flying inside. I also picked up a 2 slot battery charger so I can charge 3 batteries at once.
Amazon. They're not too expensive. Here is the link for the pack I have
might want to start with something simpler to get the basics down such as an Arduino car kit and go from there
robot arm of death!
make a cheap version of this. be creative~