Reddit mentions: The best sanding rolls
We found 13 Reddit comments discussing the best sanding rolls. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 6 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. PORTER-CABLE Sandpaper Roll, Adhesive-Backed, 4 1/2-Inch X 10-Yard, 120-Grit (740001201)
- Clog- and loading-resistant sandpaper can be used on a wide variety of materials
- Comprised of aluminum oxide grain
- Resin coating fights against damage caused by heat or humidity
- Clog- and loading-resistant sandpaper can be used on a wide variety of materials
- Comprised of aluminum oxide grain
- Resin coating fights against damage caused by heat or humidity
- Responsive adhesive gives you greater control
- Works on plastic, wood, painted surfaces, fiberglass, and metal
Features:
Specs:
Height | 2.8 Inches |
Length | 5.63 Inches |
Number of items | 1 |
Size | 4-1/2" x 10 yrd |
Weight | 0.95 Pounds |
Width | 2.88 Inches |
2. Woodturner ins Multi-Roll Sanding Pack
- Includes five rolls of J-weight, cloth-backed sandpaper
- Includes sandpaper in 150, 240, 320, 400 and 600 grits
Features:
Specs:
Height | 3.7 Inches |
Length | 7 Inches |
Weight | 1.06 Pounds |
Width | 3.8 Inches |
3. Scotch-Brite(TM) 7447B Abrasive Hand Pad, General Purpose, Maroon Color, Aluminum Oxide, Grit Very Fine (Case of 60)
Universal surface conditioning hand pad is designed for a variety of applicationsUsed by hand, with a hand block or with in-line sandersExcellent starting abrasive pad for cleaning finishing, graining, denibbing and defuzzing.Grade: Very-FineMeasures Length: 9" (229mm) Width: 6" (152mm)
Specs:
Color | Maroon (6 in. x 0.25 yds.) |
Height | 19.7 Inches |
Length | 6.9 Inches |
Number of items | 60 |
Weight | 0.059999999949685 Pounds |
Width | 9.6 Inches |
4. Norton Q421 Screen-Bak Durite Abrasive Roll, Cloth Backing, Silicon Carbide, Waterproof, 1-1/2" Width x 25yd Length, Grit P120 (Pack of 10)
- P-graded silicon carbide on open mesh backing^Extreme resistance to loading when removing scale, rust and corrosion^Ideal for drywall applications^Waterproof, washable^Good performance level
Features:
Specs:
Height | 5 Inches |
Length | 8 Inches |
Number of items | 10 |
Weight | 1.39 Pounds |
Width | 8 Inches |
5. Steel Sandpaper Roll Dispenser with 5 Turners Mesh Abrasive 1" x 20' Rolls (Steel Dispenser w/ 5 Mesh 1" x 20' Rolls)
The 1" x 20' Mesh Rolls are Conveniently packaged in a dispenser box to make choosing just the right length strip quick and easy.Perfect for turning, sanding spindles, pens, detail work, small projects and much more. The strips are easily wrapped around objects for better detail work or for more agg...
Specs:
Size | 5 rolls w/ Dispenser |
6. PORTER-CABLE Sandpaper Roll, Adhesive-Backed, 4 1/2-Inch X 10-Yard, 80-Grit (740000801)
- Clog- and loading-resistant sandpaper can be used on a wide variety of materials
- Comprised of aluminum oxide grain
- Resin coating fights against damage caused by heat or humidity
- Clog- and loading-resistant sandpaper can be used on a wide variety of materials
- Comprised of aluminum oxide grain
- Resin coating fights against damage caused by heat or humidity
- Responsive adhesive gives you greater control
- Works on plastic, wood, painted surfaces, fiberglass, and metal
Features:
Specs:
Height | 3.8 Inches |
Length | 5.63 Inches |
Number of items | 1 |
Size | 4-1/2" x 10 yrd |
Weight | 1.15 Pounds |
Width | 6.63 Inches |
🎓 Reddit experts on sanding rolls
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where sanding rolls are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
I've built a Traditions flintlock pistol and followed these videos to get my bearings on what to do. part 1 part 2. Here is a different series of videos I referenced: part 1
Your kit does not look radically different from the level of completeness from the Traditions, so give those a watch to get a sense. Remember that getting it functional is not difficult, and you can spent as much time finishing it to perfection as your patience allows. By hours, you're looking at shaping the stock to fit your separate parts.
When you get sandpaper, I found a wood turning box where you rip off what you need as you go was handy.
Good luck!
If the pieces are pretty far off I would make a router sled
https://i.imgur.com/A6y2Zae.jpg
lots of youtube videos showing how to make and use these. I have flattened and thicknessed planed many boards with mine.
​
If you only need a little bit of flattening, or want to clean up a board that you just routed down: Order some adhesive sandpaper roll
https://www.amazon.com/PORTER-CABLE-740001201-2-Inch-Adhesive-Backed-Sanding/dp/B0000223SK
Obtain a flat strip of granite from a local marble countertop place, they gave me a leftover for free. 4x30". Apply the sandpaper to the granite. Pencil cross hatches onto your board and sand until they all disapear.
Are these what you are recommending? Thank you so much for your help.
https://www.amazon.com/Scotch-Brite-Abrasive-General-Purpose-Aluminum/dp/B001S8HF9W/ref=sr_1_2?ie=UTF8&qid=1469192797&sr=8-2&keywords=Scotch+brite+pads+maroon
I would get a sheet of plate glass and a long strip of sandpaper. Then as long as your lumber is reasonably flat to begin with it shouldn't take too much to clean up the surface/make it flat for gluing. I haven't actually done this, but I think it would be worth a try.
It looks like this: https://www.amazon.com/Norton-Screen-Bak-Abrasive-Backing-Waterproof/dp/B001HWOE6Q
I searched for "wide mesh sanding screen." I think the only issue is determining the grit. Also, you might have to buy one million yards of the stuff.
80 grit self adhesive sandpaper would cover it.
I'd guess it was used as a dispenser for sandpaper or other materials that came on a roll https://www.amazon.com/Sandpaper-Dispenser-Furniture-Restoration-Automotive/dp/B07457VPWY
If you do pursue diamond stones, here is a list of what I have.. I am not sure if this the be-all-end-all, and I can definitely recommend trying lots of things, because sharpening seems to be something so personal. Just wanted to collate in one place what I have settled on thus far.
This is one of the cheaper setups. I think it would be interesting to try ceramics at the top end, and better leather for a multi-strop setup.. Just ran out of funds after trying several failed other methods ;)
OP gave you some good advice about research. I'd add that if you can somehow find someone local who can show you what sharp really is, that would be a big bonus. I haven't found that person yet myself, because I am a hermit.
Stones:
Paddles:
Stropping:
Sandpaper:
All the crappy farm tables and diy projects on r/woodworking a your post gets removed, wtf.
I have a rikon half speed 1850 rpm 8" grinder with a 80 grit CBN cubic boron nitride wheel and a veritas tool rest. Shapton ceramic 320, 1000, 5000, 12000 stones. A 36"x6" 3 cm thick piece of granite and use adhesive backed sandpaper rolls. I wax the granite to allow the paper to come off the granite easily.
grinder
cbn wheel
tool rest
stones
320 g
1000 g
5000 g
12000
sand paper
I feel you. What an awful bitch. May I suggest hiding your tp and replacing it with a roll of sandpaper?
I thought I was the only one with this experience! My Ndad would only take horrifying, nasty dumps in my bathroom, too. Even worse? He had to walk through my bedroom to get to it, would leave the door open, and would consequently stink up my bedroom.
He also loved to "borrow" my car for road trips when I was a teenager. He believed he was entitled to it, as he paid for the insurance (he forbade me to pay for my own insurance, despite my attempts to do so). He would completely trash the interior with food, garbage, and mud, and would leave cups or bottles of pee in it amongst the garbage. OPEN containers of urine in a car when we lived in the South and regularly experienced 90+ degree weather. That jackass made my car smell like foul, fermented piss for weeks at a time, a smell that lingered even after I meticulously cleaned my car. The one time I told him HE should clean my car since HE trashed it, he vehemently lectured me about respecting him and said I needed to practice responsibility by keeping my own car clean. Yes, he continued to "borrow" my car and my brainwashed self was too scared to say anything about it again.
I did get back at him somewhat. If I got warning (advanced notice was rare) that he'd be using my car, and I was feeling a little brave, I'd run out, tune my radio to the local rap station, and crank the volume and bass to maximum. The resulting boom of sound and surprised shrieking when he started my car were totally worth the eventually blown speakers.
Seriously, though: sandpaper. Like so:
PORTER-CABLE 740000801 4 1/2-Inch x 10yd 80 Grit Adhesive-Backed Sanding Roll https://www.amazon.com/dp/B0000223SI/ref=cm_sw_r_cp_apa_0xc6ybA32TXSX
Edit: clarity and formatting