Reddit mentions: The best smartwatch cases
We found 378 Reddit comments discussing the best smartwatch cases. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 107 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. SIRUIBO Compatible with Apple Watch Series 3 Screen Protector 42mm, Soft Slim Full-Around Protective iWatch 3 Case Cover for Apple Watch Series 3 2 1, Rosgold
- available in black or silver finish; this is the BLACK VERSION
- 12 volt DC operation; will work anywhere in the world
- RIAA freq response 20hz-20,000hz +/- 0.5dB, S/N ratio 85dB
- Gold plated jacks and black anodized metal casing; ground wire terminal and power indicator
- Includes AC adaptor, RCA cable, miniplug adaptor
- available in black or silver finish (read the SELLER'S COMMENTS when purchasing to make sure you are buying the color you want...)
Features:
Specs:
Height | 2 Inches |
Length | 8 Inches |
Weight | 0.01 Pounds |
Width | 3 Inches |
2. Spigen Rugged Armor Designed for Apple Watch Case for 42mm Series 3/Series 2/1/Original (2015) - Black
Flexible TPU allows quick and easy installationDurable build with a raise of 1.2mm to protect screenAluminum button for solid feedback and an easy pressScreen Protector NOT includedApple Watch Case Compatible with Apple Watch Series 3/2/1/Original(2015)/Nike+ Sport Edition 42mm
Specs:
Color | Black |
Height | 3.5433 Inches |
Length | 7.16534 Inches |
Weight | 0.009259415004 Pounds |
Width | 0.59055 Inches |
3. [6 Color Pack] Fintie Case Compatible with Apple Watch 38mm, Slim Lightweight Hard Protective Bumper Cover Compatible with All Versions 38mm Apple Watch Series 3/2/1
★★★★★ [Limited-time Promotion] Compatible with All Versions 38mm Watch Series 3 (2017) / Series 2 / 1 / Original (2015). NOT FIT for 42mm Watch.Premium Polycarbonate Hard Protective Bumper Case Cover for your Watch.Slim and lightweight design. Access to all controls, buttons, sensors and w...
Specs:
Color | Multi-Color A |
Height | 0.65 Inches |
Length | 6.9 Inches |
Size | 38 mm |
Weight | 0.04 Pounds |
Width | 3.85 Inches |
4. Spigen Rugged Armor Designed for Apple Watch Case for 44mm Series 5 / Series 4 - Black
Everyday scratch defense with flexible and shock-absorbent layerMatte finish adds a modern lookRaised bezels for bolstered screen protectionFull access to all features with precise cutoutsCompatible with Apple Watch 44mm Series 5 and Series 4
Specs:
Color | Black |
Height | 0.476377 Inches |
Length | 1.665351 Inches |
Weight | 0.00881849048 Pounds |
Width | 1.905508 Inches |
5. Ringke Bezel Styling for Galaxy Watch 46mm / Galaxy Gear S3 Frontier & Classic Bezel Ring Adhesive Cover Anti Scratch Stainless Steel Protection [Stainless] for Galaxy Watch Accessory GW-46-01
Ringke Bezel Styling for Galaxy Watch 46mm / Gear S3 Frontier & Classic focuses a spotlight on your watch by giving it a new and improved visual.Designed to be the optimal size for the existing watch bezel. The peerless composition of the Bezel Styling allows a seamless connection between the rotati...
Specs:
Color | Silver Black Engraved (46-01) |
Height | 0.05 Inches |
Length | 1.8 Inches |
Weight | 0.00220462262 Pounds |
Width | 1.8 Inches |
6. Apple Watch Series 2 42MM Case, Monoy 2-Pack (Clear+Grey) Slim Clear 2nd PC Hard Screen Protector for iwatch Series 2 42mm 2016 (PC Hard Case)
2-Pack (Clear+Grey) Screen Protector Cover for Apple Watch Series 2 42mmSolved the problem of losing easily on 1st PC Cover .Case only for Apple watch Series 2Complete access to all functions of the watch without having to remove the case Extremely tough, durable case molds perfectly to your watch s...
Specs:
Color | 42MM PC Hard Case |
Height | 0.75 inches |
Length | 2.9 inches |
Width | 1.75 inches |
7. [6 Color Pack] Fintie Case Compatible with Apple Watch 42mm, Slim Lightweight Hard Protective Bumper Cover Compatible with All Versions 42mm Apple Watch Series 3 2 1 Sport & Edition - Multi Color A
- Specifically compatible with All Versions 42mm Watch Series 3 / Series 2 / 1 / Original (2015). NOT FIT for 38mm Watch.
- Premium Polycarbonate Hard Protective Bumper Case Cover for your Watch.
- Slim and lightweight design. Access to all controls, buttons, sensors and watch features.
- 6 Color combination pack dresses your Watch to match your daily mood.
- Easily to install. Cases Only, Watch and Watch Band are not included! *** Please Note: If you are unable to submit a return request on this item, please feel free to contact us and tell us any problem you have met. We would be happy to assist you with returns.
Features:
Specs:
Color | Multi-Color A |
Height | 0.7 Inches |
Length | 6.93 Inches |
Size | 42 mm |
Weight | 0.09 Pounds |
Width | 3.86 Inches |
8. Smiling Case for Apple Watch Series 4 & Series 5 with Built in TPU Screen Protector 40mm - All Around Protective Case for Apple watch Series 5/4 40mm (clear)
- [Designed for apple watch 40mm] This case fit for apple watch series 6/ SE/ series 5 / Series 4 4 40mm, high-quality TPU case with built in screen protector.
- [Precise cutout]: This Apple watch screen protector 40mm was designed with precise cutouts for functional buttons and ports.
- [Ultra slim]: This apple watch series 6/5 40mm screen protector front cover is only 0.3mm and total 0.5oz weight not add any bulk and you will not lose any touch sensitivity.
- [Shock-proof]: made of high quality, anti-scratch TPU, this apple watch case covers the full front and curved edges of the I watch, Offering full protection for YOUR Apple Watch against Scratches, drops, and bumps.
- Includes: 2 pack High quality TPU case with screen protector for Apple Watch series 6/SE/series 5 /series 4 40mm
Features:
Specs:
Color | Clear |
Number of items | 2 |
Release date | January 2019 |
Size | 40mm |
9. Spigen Tough Armor Designed for Apple Watch Case and Built in Screen Protector for 42mm Series 1 (2015) - Gunmetal
[Patent Pending] Intense Fortification—Air Cushion Technology and dual-layered protectionShock-absorbing TPU interior + Polycarbonate exterior[IMPORTANT] Check the video on the left side for help with installationRaised lip of 2.0mm protects screenApple Watch Case Compatible with Apple Watch 42mm ...
Specs:
Color | 42mm Gunmetal |
Height | 3.2 Inches |
Length | 5.9 Inches |
Size | 42 mm |
Weight | 0.220462262 Pounds |
Width | 0.4 Inches |
10. Spigen Liquid Air Armor Designed for Samsung Galaxy Watch Active 2 Case 44mm (2019) - Black
Exclusively designed for the Galaxy Watch Active 2 44mm (2019)Scratch defense with flexible and shock-absorbent layerMatte finish adds modern look to the sleek designRaised bezels for bolstered screen protectionSlim and form-fitted for quick button response
Specs:
Color | Matte Black |
Height | 0.47244 Inches |
Length | 1.822831 Inches |
Weight | 0.00440924524 Pounds |
Width | 1.822831 Inches |
11. Spigen Liquid Air Armor Designed for Samsung Galaxy Watch Active 2 Case 40mm (2019) - Black
- Exclusively designed for the Galaxy Watch Active 2 40mm (2019)
- Compatible with ECG Monitoring Feature with Button Cut-Out design
- Matte finish adds modern look to the sleek design
- Raised bezels for bolstered screen protection
- Slim and form-fitted for quick button response
Features:
Specs:
Color | Matte Black |
Height | 0.480314 Inches |
Length | 1.669288 Inches |
Number of items | 1 |
Size | 40mm |
Weight | 0.00440924524 Pounds |
Width | 1.669288 Inches |
12. Spigen Thin Fit Designed for Apple Watch Case for 44mm Series 5 / Series 4 - Black
Everyday scratch defense with polycarbonate exteriorForm-fitted design adds no bulk to the deviceFull access to all features with precise cutoutsConvenient snap-on design for easy installationCompatible with Apple Watch 44mm Series 5 and Series 4
Specs:
Color | Black |
Height | 0.417322 Inches |
Length | 1.594485 Inches |
Weight | 0.00220462262 Pounds |
Width | 1.814957 Inches |
13. Spigen Liquid Air Armor Designed for Samsung Galaxy Watch Active Case 40mm (2019) - Black
Exclusively designed for the Galaxy Watch Active 40mm (2019)Scratch defense with flexible and shock-absorbent layerMatte finish adds modern look to the sleek designRaised bezels for bolstered screen protectionSlim and form-fitted for quick button response
Specs:
Color | Black |
Height | 0.787401574 Inches |
Length | 4.0157480274 Inches |
Width | 3.7007873978 Inches |
14. MENEEA for Apple Watch Series 4/Series 5 44MM Case Protector,Ultra-Thin Anti-Scratch Flexible Soft Protective Bumper Cover for New Apple Watch Series 4/Series 5,Replacement for iWatch 4 5 Case Black
- Latest 3D NAND Technology
- Sequential read/write Speed Up to 520/450 MB/s *Vary by SSD capacity
- SATA III 2.5 inch form factor
- Ideal for personal, gaming and business use
- Compatible with Windows 10/8/7/Server 2003, Vista (SP1 and above), XP (SP2 and above), MAC OSX, and Linux
Features:
15. Speck Products CandyShell Fit Case for Apple Watch 42mm, Black/Slate Grey
- Durable design wraps the perimeter of your Apple Watch (42mm), Apple Watch Sport or Apple Watch Edition while leaving buttons and crown fully accessible.
- Hard, impact-resisting exterior and soft, shock-absorbing interior guard against bumps, knocks, and other collisions in a surprisingly slim profile.
- Durable materials flex on and off easily for convenience on-the-go
- Sleek, slim design adds minimal bulk to Apple Watch
- Candy Shell Fit underwent durability and accelerated life testing against extreme temperatures, cracks, and abrasions. Material:Exterior hard interior rubber
Features:
Specs:
Color | Black/Slate Grey |
Height | 4.25 Inches |
Length | 5.25 Inches |
Size | 42 mm |
Width | 1 Inches |
16. Spigen Rugged Armor Designed for Apple Watch Case for 40mm Series 5 / Series 4 - Black
Everyday scratch defense with flexible and shock-absorbent layerMatte finish adds a modern lookRaised bezels for bolstered screen protectionFull access to all features with precise cutoutsCompatible with Apple Watch 40mm Series 5 and Series 4
Specs:
Color | Black |
Height | 0.480314 Inches |
Length | 1.527556 Inches |
Weight | 0.00881849048 Pounds |
Width | 1.755902 Inches |
17. Mahipey OULUOQI Compatible with Apple Watch Case 42mm, Shock-Proof and Shatter-Resistant Compatible with Apple Watch Protector Compatible with Apple Watch Series 3, 2, 1, Sport, Edition - Black/Black
- 18-month Support: For 18 months after the date of purchase, we take care of all quality-related issues, please contact us.
- Charge directly: Do not need to take the case off to charge. And you will not be worried about sweat buildup after a workout.
- Special Design :Durable and soft TPU material cover the side and edges, slightly higher than the watch surface designed keeps your Watch from scratched and scuffed. Pls notice that do not bend the case to prevent it from breaking.
- Application: Perfectly fit for 42mm watch Series 3, Series 2, Series 1, Sport, Edition.
- Package Included: 1 x 42mm Black Case.
Features:
Specs:
Color | Black |
Size | 42 mm |
18. Ringke Bezel Styling for Galaxy Watch 46mm / Galaxy Gear S3 Frontier & Classic Bezel Ring Adhesive Cover Anti Scratch Stainless Steel Protection [Stainless] for Galaxy Watch Accessory GW-46-02
- Ringke Bezel Styling for Galaxy Watch 46mm / Gear S3 Frontier & Classic focuses a spotlight on your watch by giving it a new and improved visual.
- Designed to be the optimal size for the existing watch bezel. The peerless composition of the Bezel Styling allows a seamless connection between the rotating ring and Styling.
- High-quality Stainless Steel bezel selections available in various colors and patterns for Galaxy Watch 46mm / Gear S3 Frontier & Classic.
- Simply grab your smartwatch and place it on top. It's easy to change the style. The adhesive on the bezel ring allows easy attachment and removal of the Styling.
- Please Be Advised - Galaxy Watch body is NOT included with the purchase of product.
Features:
Specs:
Color | Silver Engraved (46-02) |
Height | 0.05 Inches |
Length | 1.8 Inches |
Weight | 0.00220462262 Pounds |
Width | 1.8 Inches |
19. Julk Series 3 38mm Case for Apple Watch Screen Protector, iWatch Overall Protective Case TPU HD Clear Ultra-Thin Cover for Apple Watch Series 3 (38mm)(2-Pack)
Notice: This Case Fits for Series 3 38mm (2017). Please Search "Julk" for Other Sizes/Version.Kindly Remind: Using this product at gym or sports activities may cause the moisture (from perspiration) to be trapped between this product and the watch screen. This is due to the nature of the product as ...
Specs:
Color | Transparent |
Height | 0.65 Inches |
Length | 3.6 Inches |
Size | 38 mm |
Weight | 0.04 Pounds |
Width | 3.2 Inches |
20. Ringke Bezel Styling for Galaxy Watch 46mm / Galaxy Gear S3 Frontier & Classic Bezel Ring Adhesive Cover Anti Scratch Stainless Steel Protection [Stainless] for Galaxy Watch Accessory GW-46-12
Ringke Bezel Styling for Galaxy Watch 46mm / Gear S3 Frontier & Classic focuses a spotlight on your watch by giving it a new and improved visual.Designed to be the optimal size for the existing watch bezel. The peerless composition of the Bezel Styling allows a seamless connection between the rotati...
Specs:
Color | Shiny Silver-46-12 |
Height | 0.05 Inches |
Length | 1.8 Inches |
Weight | 0.0771617917 Pounds |
Width | 1.8 Inches |
🎓 Reddit experts on smartwatch cases
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where smartwatch cases are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Personally, I'd say search through thrift stores for LPs and even a Turntable. I got my record player from a thrift store for $10 and it works amazingly, has for about a year now, the most maintenance I've had to do is buy a new drive belt and a preamp so I could actually turn it up to proper volume (all that was about a $60 total). I can't guarantee the same luck with you of course. But that's always the option if you want to go cheap and don't have much of a preference. There's also the internet of course too.
For records, again thrift stores are great. They're usually only a $1 a record. You will see A LOT of repeats in a thrift store record collection, but if you take the time to sort through it, you can find great things. Also the internet is a great way to finding local stores around you and a great way to buy records. I live in Massachusetts, and I buy a great bulk of records from Newbury Comics, seeing as it's closest to me and one of the very few places that has them around me. Buying directly from whatever artist you want also works, it's reliable AND you're directly supporting them and you can also get some pretty cool bundles and deals too! I also recommend Kung Fu Nation if you like any of the bands they support they usually sell LPs of albums they've released.
As for equipment, just find a reliable pair of speakers, I suggest buying a preamp (this is the one I bought and it's amazing. And when it comes to your turntable just be sure to keep everything in proper running order and maintain it.
I hope this helps, happy hunting!
I bought the Spigen Liquid Air, which protects the whole watch body. I really like it because the watch body is protected without appearing bulky. I didn't buy a screen protector, but the IQ Shield is very popular. Note: The Spigen doesn't have edges raised high enough. So if on a rare occasion, I were to lie my watch face down, then my screen would definitely touch the surface.
Download the Galaxy Wearable app as well as the Watch Active2 Plugin from the Play Store. You'll need these, at the very least, when pairing your phone and your smartwatch. When setting up your watch, go through each and every possible setting through both, the app and the watch itself. On the app, I haven't found a way to enable the PIN security, but I was able to through the phone with some exploration. I adjusted the settings to help preserve battery life, like turning off the Always-On Display (AOD), being picky about which phone apps I wanted to receive notifications on my watch, adjusting the heart rate monitor to only check manually, adjusting brightness, etc. Flossy Carter on YouTube posted a nice review and setup process of the watch.
As ThatFoxyThing said, the watch's keyboard is a T9. I like it because it felt nostalgic, but I can understand why others wouldn't. I don't know if there's a keyboard watch app to download as a remedy if you don't like the T9 setup.
I've experienced a few connection issues with Spotify before, but it has since been resolved so far. The app is great now for me.
I bought my 46mm LTE about 2 months ago ($380 brand new from Amazon). Prior to getting it, I purchased the Active 2 44mm to try it out since it was the newer watch. It's a very nice watch, and not to knock it, but I really didn't like the way it looked. It's a bit on the feminine side and just looks odd. I returned it the next day solely based off its design.
I have since purchased a Ringke bezel for my 46mm...it looked awesome to begin with, but the silver bezel just puts it over the top.
https://www.amazon.com/dp/B07LGVRPP3/ref=cm_sw_r_cp_apa_i_Jc01DbQDW6JXV
I run 5 miles a day with it, and workout at the gym. It records (almost) everything perfectly. Plus, even with LTE on I get outstanding battery life. So not only is it a great looking watch, it is equally a great fitness tracker.
Honestly, this little piece of tech is one of the best purchases I've made in a long time.
Yes, you'll be able to play modern records on old turntables. All records, old and new, run at standardised speeds of 33 or 45 rpm. They're clearly marked on each LP, and you should switch the speed on the controls of your turntable.
Normally when you have a turntable connected to an amplifier, the amplifier MUST have a phono input, otherwise you need to use an external phono pre-amp (They're really cheap - something like this is fine: http://amzn.to/17VJtnt). Old "receivers" or expensive home theatre hi-fi Amps almost always do, but lots of cheaper stereos don't. Sometimes, the turntable has an in-built pre-amp. This means that it does not matter what kind of amplifier/receiver you hook it up to.
I'm not familiar enough with turntables to recommend very many, but I have a NAD c556 (identical to the Rega RP1) which I love, and goes for about $500.
One of the most popular turntables on this site is the ProJect Debut Carbon. It's also great, but doesn't come with a dust cover, which is an absolute must in my opinion (I have one and it's always covered in dust - I can't imagine what my platter would be like if the cover wasn't there!)
Depending on your budget, it can be a good idea to buy a second hand turntable. If you buy a used turntable, you should probably replace the stylus, because you can't be sure how old it is. Old needles in poor condition will permanently damage your records! Great turntables can often (and sometimes speakers) be found quite cheaply at goodwill, or garage sales.
It's also a good idea to get a brush to get dust of your records, and a cork mat, which will help prevent the build up of static, but these aren't essential to making the turntable actually work!
Finally, don't worry if it makes you look like a wanker - You don't have to be an audiophile to buy/collect vinyl, and if you like it, then that's all that matters!
I would definitely use a screen protector. Not everyone likes cases, but I do and here's my favorites. I think the S3 is the same size as the S2, so they should fit the S3 I hope.
Skinomi screen protector from amazon:
https://www.amazon.com/dp/B01H7WV1QU/ref=cm_sw_r_cp_api_bScCzb9QMKFDX
Great case, but it's bulky. It has a raised edge that MIGHT protect the screen a little, but I don't trust it so I still use a screen protector.
https://www.amazon.com/dp/B01N0QYUR4/ref=cm_sw_r_cp_api_USlEzbKN82J81
Had this one for a few months and they're great. They snap on easily and are tight and secure. Made of hard plastic type material.
https://www.amazon.com/gp/aw/d/B014HA8RG2/ref=mp_s_a_1_3?ie=UTF8&qid=1501106014&sr=8-3&pi=AC_SX236_SY340_QL65&keywords=fintie+apple+watch+case&dpPl=1&dpID=51S3Iq%2BGZIL&ref=plSrch
I wanted one that was gray to match my space gray watch better. They are really form fitting and thin and barely stick out from the watch at all. Made of rubbery TPU material.
https://www.amazon.com/gp/aw/d/B01MTUTMMG/ref=mp_s_a_1_8?ie=UTF8&qid=1501106149&sr=8-8&refinements=p_89%3AMonoy%C2%AE&pi=AC_SX236_SY340_QL65&keywords=Monoy&dpPl=1&dpID=511seG1-pPL&ref=plSrch&th=1&psc=1
I have a similar one to your 2nd example. The Spigen Tough Armor. It includes a built-in screen protector. It's working well so far.
I also considered your first example, but was concerned that it might scratch the watch after sliding it on/off repeatedly.
I don't really like the look of screen protectors as I can usually see the edges and, IMO, they take away from the look of the device and screen quality. I also don't want to have my watch in a case full time. However, I wanted something to protect my watch when working in the yard, on the car, etc. This case was the best I could find to protect both the screen and the watch. It's fairly easy to put on/take off. It looks good enough that I could leave it on for a quick trip in to town if I didn't want to bother taking it off right away.
I could not find many options that included the built in screen protection. I wish I could find something comparable that would not require me to remove the band to install/uninstall .
I would also like to have one that was easy to install/uninstall and covered the digital crown to keep out dust when mowing, etc.
The general attitude towards cases on this sub is generally no, but given certain environments I can see why it's a good idea.
Unless you're going swimming (full watch submersion for long periods of time), you probably won't need the catalyst case for the Apple Watch.
For rough physical environments, I recommend using something like this Spigen case. You'll save a great deal of cash compared to the catalyst but also have adequate impact protection.
For an active setting I like MD 153 or SportMinimalLite, and for a more professional look I like AS_Watch_Mod or X2 Viron.
Barton makes the absolute best silicone strap, it has a curve on each strap that makes it more comfortable for a larger wrist.
https://www.amazon.com/Barton-Elite-Silicone-Watch-Bands/dp/B07B5M91V7/ref=mp_s_a_1_5?keywords=barton+galaxy+watch+46mm+bands&qid=1567896574&s=gateway&sprefix=Barton+Galaxy+watch&sr=8-5
I went this route for a more professional look. Also a bezel cover looks great in any setting. https://www.amazon.com/gp/aw/d/B07HQ8NSRX?psc=1&ref=ppx_pop_mob_b_asin_title
https://www.amazon.com/gp/aw/d/B07LGVRPP3?psc=1&ref=ppx_pop_mob_b_asin_title
I got my Active one of these and I've really liked it so far. Had it since May and feels like it does a pretty good protecting from accidental brushes against a wall or whatnot.
It completely covers the buttons, so hopefully will help avoid what happened to OP (sorry OP, that sucks).
Doesn't detract from the look of the watch either (at least with my black version) -- honestly I think it makes the watch look better.
I have seen the Grado black recommended, but it's probably outside my price range for my first upgrade, as it's worth more than what I paid for the TT. I also read that conical is better for older records, because an elliptical would make the pops and clicks louder, is that true? I just started so I don't have many new records yet, but I plan to. And yeah, I just got the Pyle as a stop gap until I can afford something better. I also looked at the TCC Preamp, is the ART still preferred? Thanks.
EDIT: My setup is a yamaha 3066 (aka 375) receiver, Micca MB42X speakers and an andrew jones sub.
My Smiling brand bumper + screen protector has served me very well in the gritty, sand-blast environment of riding a recumbent trike (the watch is 10-12” above the pavement and 2-3” from the right front tire). It lasts 3-6 months before needing replacement but protects my watch very well. It is, however, a “soft” case and might not withstand your work environment. It can be seen here:
https://amazon.com/Smiling-Apple-Watch-Screen-Protector/dp/B07JZ69XJ9/
Good luck in finding something that will work for you.
Thanks for the response!~
Now, is there any particular brand of p-mount cartridge you recommend? Are there any tools I will need to install the cartridge? And I was looking at amplifiers on line (before your comment was posted) and I came across this "TCC TC-750 BLACK Audiophile Phono Preamp" which seems to have gotten pretty good reviews. However would it still be more advantageous to get a vintage amp? Would it wind up costing less?
agreed, had a gshock aviator before. I use it caseless with a zagg shield on the screen i had them put on in the local mall. looks like new, i swap the silicone bands often tho. Seems to hold up well. i'd probably recommend something like the case my friend has below, if your in a foot pursuit prone area or generally rough area.
My buddy works in another dept and has this rugged armor case on it: http://www.amazon.com/Apple-Watch-Spigen-Rugged-Resilient/dp/B00UVSNQPM/ref=sr_1_3?ie=UTF8&qid=1465247925&sr=8-3&keywords=apple+watch+case
Vintage turntable: $100
Cartridge: $60 Other good options exist
Basic phono stage: $50
Headphones: $100 Headphones are hard to recommend, but the entry-level Grados are considered good bang-for-buck by most. If you want better sound, spend more on the headphones.
Headphone amp: This is headphone specific. You probably don't need one. Build yourself a Cmoy if anything.
I'm a nurse and want to wear mine at work. I just got my Apple Watch Sport and I'm worried about scratching it by bumping it on someone's bed rail or something, so I ordered a screen protector from Amazon and also some bumpers for the face to change up the color and add some protection from scuffs. I also got apple care. I may be being too cautious, but I rarely spend $350 on an accessory so you're damn right I'm gonna baby it!
Edit: This is the screen protector I ordered. I haven't received it yet but it offers edge to edge protection and seemed to have mostly positive reviews.
These are the bumpers I got. I thought they'd add a little extra protection and plus it'll be fun to switch up the colors and match them with different bands.
Hey! I'm going to get an AT 120 LP. I have a question - can i buy passive speakers, if I'm also going to buy this TCC TC-750 Phono Preamp. Do i also need to buy a large amplifier in order for this all to work?
Turntable -> TCC Phono Preamp -> PASSIVE powered speakers = is it everything i need for the music to play? Please help me out, i looked for so long and it's still really confusing to me. Thanks a million.
Well you would plug the record player into the "input" of the preamp, and them from the output of the preamp you would go into any "input" of the Yamaha. So CD, AUX would be a good bet. And then yes, after speakers, you are good to go.
Here is a phono preamp for even cheaper. ;)
http://www.amazon.com/TC-750-BLACK-Audiophile-Phono-Preamplifier/dp/B000A36LQ4/ref=sr_1_3?ie=UTF8&qid=1406504785&sr=8-3&keywords=preamp+phono
I just picked up the S4 SS 44mm. I work in an industrial setting so I need to have a case on my Apple Watch. These two fit the bill and look pretty good considering. I didn’t wear a case on my Series 0 SS 42mm and it got pretty beat up on the SS. It never got a scratch on the face so I’m not too worried about that but I want to protect the SS from scuffs this time around.
Spigen Thin Fit
Spigen Rugged Armor Works
I’ve been using this case since I got my watch series 3 when it came out last year. Got this after I shattered my Apple Watch 2 after knocking it on a door handle in the OR. I can’t even tell it’s there. it’s easy to clean and protects the entire Watch face. I’ve wiped it with purple tops, bleach, hydrogen peroxide, alcohol preps, etc.
Julk Apple Watch 3 Case
This is my favorite case because it's not too big but it offers pretty good protection.
https://www.amazon.com/dp/B01MTL6BRE/ref=cm_sw_r_cp_api_H1ojzbT7YZWDN
Hey guys! I've been lurking this subreddit since I picked up my first record a couple months ago. Since then, I've been researching budget turntables, and decided to buy this https://www.amazon.com/dp/B01F2B3FKI/ref=twister_B01KI5736U?_encoding=UTF8&psc=1 turntable and this https://www.amazon.com/gp/product/B000A36LQ4/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 pre-amp.
I went scouring the pawn shops today and came across this http://imgur.com/a/2Lt0j amplifier. I liked the look of it, and figured you couldn't really go wrong with an '89 or '90 Kenwood amp. I took it home for $50, and realized there is no volume control! Apparently this model (KM-208) was originally sold with a pre-amp that had all of the volume controls. I have 30 days to return it, but if possible, I wouldn't mind rigging up a volume dial. Is this amp worth the work, or should I return it? As of now I don't have any speakers, but I'm willing to spend up to $250ish. I'm also considering building my own with the same budget.
TL;DR I'm new to vinyl ad so far have collected a TT, a pre-amp, and would like your opinion on the amp I bought.
Thanks for reading. I'm looking forward to your feedback!
you can buy a USB pre amp, which would be much better than buying a USB turntable.
but honestly, just buy a pre amp, possibly retip or replace your cartridge, new belt, whatever get it up to good condition.
http://www.amazon.com/dp/B000A36LQ4/
this is for moving magnet cartridges. if the turntable wasnt very high end this is probably what you need.
I love this case. No branding. Not too bulky.
link
I love it on my AW S4 44 SBSS. It keeps me worry free when doing yard work. I also tend to bump my arm into everything.
Spigen Liquid Air Armor Designed... https://www.amazon.com/dp/B07RG48J5Z?ref=ppx_pop_mob_ap_share
Looks great. A bit hard to get on so i wont be switching up the look like i thought i might but its great otherwise.
I could be completely wrong here, but the case in the photo appears to be the [Speck](Speck Products CandyShell Fit Case for Apple Watch 42mm, Black/Slate Grey https://www.amazon.com/dp/B00XEGT3GY/ref=cm_sw_r_cp_api_-h5ezbXVZFSPS) case. I have both, but I'm pretty sure the one in your photos is Speck, not Spigen.
(Not trying to be abrasive, just pointing it out.)
Ooh really that’s funny. I do the same. I don’t mix concrete much but I wouldn’t want it in my watch. If I were you I’d maybe get a small case. I don’t like them but it helps.
My case got all jacked up. https://www.amazon.com/dp/B07JZ69XJ9/ref=cm_sw_r_cp_api_i_i2rVCbNA3BF5F
I just found this. I'm pretty sure it's for line level input, so you would need any basic phono stage to input to it. I've heard people talk about this one, it gets fairly positive reviews.
Thanks for the response. I understand the questions were a little...stupid, and I appreciate you taking the time to answer them. If you don't mind answering another....
As far as a pre-amp, I'm trying to decide between this or this. Have you heard anything about these? Something else you recommend?
If it's your first TT and you're just getting started, /r/vinyl recommends this one. I've been happy with mine, although I do plan to upgrade in the future. If your budget is a little higher, I've heard good things about this one.
The one I plan on eventually getting is this guy.
The helpful suggestion above looks very special ed. I guess its one of those "eye of the beholder" things. Thanks for your feedback.
I have seen enough Apple watches in subpar condition. Just because its an Apple product, doesnt mean its indestructible.
https://www.amazon.com/dp/B07JZ69XJ9?ref=ppx_pop_mob_ap_share
Thank you! Yes it is, I got this one from Amazon
They come in a whole set, but I just use the black one. I'm constantly bumping my hands into things and wanted to protect my watch. It's done a great job, I have broken one and reordered to get another black one.
I have this on my Apple watch and I'm pretty happy with it. It's not your typical screen protector but it does the job and I don't have to worry about it cracking as easily or coming off.
https://www.amazon.com/dp/B01MTL6BRE/ref=cm_sw_r_cp_apip_3yFQtY7onvlmp
My friends is an airplane mechanic and uses an Apple Watch with a protective case. He's banged it up quite a bit and hasn't had any issues.
I'm pretty sure he has this one:
Spigen Rugged Armor Apple Watch Case with Resilient Shock Absorption and 2 Screen Protectors Included for 42mm Apple Watch Series 2 / 1 / Original (2015) - Black https://www.amazon.com/dp/B00UVSNQPM/ref=cm_sw_r_cp_api_tQU8yb49TAKT9
Cases get a lot of hate on this sub, but it’s your watch and you should wear it how you choose. I’ve used the Spigen Rugged Armor since getting my watch at Christmas and I like it. I personally do not think it adds any noticeable bulk to the watch. I originally had the case + band model, but the band didn’t fit my wrist very well so I got the case only and have been wearing it with the black Apple Sport Band the watch came with.
Link
I use this case and this band on my S0 when I'm doing more active things currently. Most other times I just have it naked. I'll use the same on my S3 if it ever finally comes (thanks a lot Best Buy).
cool i'll check that out! I'm planning to use headphones and i already have this phono preamp as well as this amp ready to order. All I need next is the turntable correct?
EDIT: possibly this Samsung SS-3350 reciever instead of that amp and preamp i posted above?
Here’s the bumper I started with:
www.amazon.com/dp/B075XDV5R6/ref=cm_sw_r_cp_api_rEKeAbKGM5FD6
Happy with the functional results and time saved!
I would get the Spigen Rugged Armour case 38mm/42mm and it's apparently it's got impact protection and is made of soft TPU that should protect the aluminium.
Apple Watch Series 1 Series 2 Series 3 Spigen, [Rugged Armor] [Black] Apple Watch 42mm Case Cover / Ultimate Impact Protection Protection from Drops and Impacts https://www.amazon.co.uk/dp/B00UVSNQPM/ref=cm_sw_r_cp_api_gxAgAbX19VAAV
The reason I recommend this is because I have used Spigen cases on phones in the past and they don't scratch the devices from my experience. Some clear cases are subject to yellowing due to exposure from the sun.
Got mine from Amazon UK last week, here is the link, hope it helps?
https://www.amazon.co.uk/gp/aw/d/B07YBMX5SQ?psc=1&ref=ppx_pop_mob_b_asin_image
Spigen makes a great one thats minimal and secure.
I bought this case in both black and white:
https://www.amazon.com/dp/B00XEGT3GY/ref=cm_sw_r_sms_awdb_NNksyb3H90Q7J
It does add a noticeable amount of bulk to the watch and at times could pinch the skin on the top of my wrist. They were only around $15 when I purchased them but the seem to have gone up since then. I eventually got tired of messing with them and stopped wearing them. YMMV but I honestly can't recommend this product unless you find it cheaper maybe or find it in a store to try out first. Sorry I don't have any recommendations for a screen protector. Good luck!
Ringke Bezel Styling for Galaxy.
https://www.amazon.co.uk/dp/B07LGVRPP3?ref=ppx_pop_mob_ap_share
👍🏼👌🏻
Glad to help! Here's what I have - https://www.amazon.com/TC-750-BLACK-Audiophile-Phono-Preamplifier/dp/B000A36LQ4
Yes, that's the one I have. Like it so much that I kept in on instead of replacing it with my Ringke Bezel.
Edit: I got mine from Amazon. Just checked they still have them.
https://www.amazon.com/Spigen-Liquid-Designed-Samsung-Galaxy/dp/B07YBMVVLT/ref=sr_1_9?keywords=samsung+active+2+case&qid=1572806033&sr=8-9
LEO here. I bought a series 1 about a month ago and haven't had any issues. I sometimes bang my watch going into people's houses or any tight spots and it's still holding strong. A bunch of the guys in my command have Apple watches as well. Some without any protection and I haven't heard any complaints. I decided to use a Spigen case on mine. I bought this one https://www.amazon.com/dp/B00UVSOWBY/ref=cm_sw_r_cp_api_3iCSyb5ATT7K0
I got the 38mm LTE series 3 in silver aluminum with applecare. I put a screen protector and case on regardless of which model because they all scratch. If you’re concerned about shattering from impact or bumps then definitely go with the aluminum and save some cash.
Armorsuit - Apple Watch Screen Protector (38mm Series 3 / 2 / 1 Compatible) MilitaryShield [Max Coverage] Screen Protector for Apple watch 38 mm [2 Pack] https://www.amazon.com/dp/B00UH3K244/ref=cm_sw_r_cp_api_xgTMAbKQXSF5C
[6 Color Pack] Fintie Apple Watch Case 38mm, Ultra Slim Lightweight Polycarbonate Hard Protective Bumper Cover for All Versions 38mm Apple Watch Series 3 (2017) / Series 2 / Series 1 Sport & Edition https://www.amazon.com/dp/B014HA8RG2?ref=yo_pop_ma_swf
Although you may want a more protective case. These snap on and can come off with enough of a bump.
Looks pretty much the same as the one you linked. https://www.amazon.com/dp/B01MTL6BRE/ref=cm_sw_r_cp_api_B4XgAb4SA9SJD
These are not perfect. They get dirty and scratched easily. And one of my two makes the screen a little less responsive in one corner. But they are easy to remove, affordable, and have a minimal impact on the size/shape of the watch.
I was looking at maybe something like this, just as a starter:
http://www.amazon.com/TC-750-BLACK-Audiophile-Phono-Preamplifier/dp/B000A36LQ4/ref=sr_1_4?ie=UTF8&qid=1310354886&sr=8-4
Surely that, coupled with my D2 and the Shure cartridge will surpass my current cermaic-based (Soundesign) TT?
I've got the 'Skinomi Apple Watch Series 4 Screen Protector', both on my 44mm and my Wife's 40mm series 4. Work like a champ. I also have the Spigen Rugged Armor case on order, it should be delivered here in a few days. That along with apple care, should all but a car wreck, protect it!
​
Skinomi:
https://www.amazon.com/gp/product/B07HNR2JML/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B07HSS4KYJ/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
​
Spigen:
https://www.amazon.com/gp/product/B07HSS4KYJ/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
https://www.amazon.com/dp/B07HSK96MZ/ref=psdc_11591908011_t3_B07HSS4KYJ
I've used and like this one, but this one is popular, as well. I have no experience with the later.
I work out with a SS Apple Watch. I would recommend another app like Gymaholic to track progress, reps, etc. And if you are worried about your watch there's this protector for it.
Smiling Apple Watch 4 Clear Case... https://www.amazon.com/dp/B07JZ69XJ9?ref=ppx_pop_mob_ap_share
I use this. It’s the smallest one I can find. I go to the gym a lot and was always hitting my watch on weights, this works.
This is what i use
https://www.amazon.com/gp/product/B075XDV5R6/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
Its solid and i like the black. I dont have a glass protector because none of them cover the entire flat part.
They have this
https://www.amazon.com/Protector-Tempered-Anti-Scratch-Resistant-Scratch-proof/dp/B07D5ZM95X/ref=sr_1_4?ie=UTF8&qid=1527792834&sr=8-4&keywords=iwatch+screen+protector+42mm
But idk if it would fit with mine.
Here it is:
My wife uses the rose gold and it is a PERFECT match. The red one is a bit light, not Product Red red, if you know what I mean.
https://www.amazon.com/gp/product/B014H9WMHS/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
This one, right? Looks great! I have a similar one with a black sportband.
I use this one, i kick the shit out of it and haven't had any issues. https://www.amazon.ca/Spigen-Rugged-Armor-Designed-Apple/dp/B07HSS4KYJ/ref=sr_1_4?keywords=apple+watch+rugged+case+spigen&qid=1571086316&sr=8-4
I picked this up for mine and I love it.
https://www.amazon.com/Spigen-Thin-Designed-Apple-Watch/dp/B07HSS8JDV
MENEEA for Apple Watch Series 4... https://www.amazon.com/dp/B07HNZGB3Q?ref=ppx_pop_mob_ap_share
I currently use this and it looks great tbh, along with the skinomi screen protector
Case - https://www.amazon.com/dp/B00UVSNQPM/ref=cm_sw_r_cp_apip_sWygC8vcNrKI8
Band - https://www.amazon.com/dp/B073BG9V9Z/ref=cm_sw_r_cp_apip_poxXNRlU9xrug
I wouldn’t dare edc my Apple Watch without some form of protection, main reason is because I accidentally hit my previous edc watch on the corner of my marble countertop and I’ve been paranoid ever since. You’re wild for running a spartan race without protection LOL.
And the reason I carried fmj its difficult for me to acquire special ammo like hp so I figured it’s better than nothing, but luckily I recently found a seller of 45 hp so I’ve taken the liberty of loading my mags with those.
Rinke bezel it's seen better days, dark color from number are peeling off
Band is V-MORO metal strap
Both of them bought from Amazon
https://www.amazon.com/dp/B0721W3MJ5/ref=cm_sw_r_cp_apap_u8gg8AihNjfai
https://www.amazon.com/dp/B07LGVRPP3/ref=cm_sw_r_cp_apap_Ymwti6XxauRl1
They are pretty rugged and don't feel cheap...I have the stainless steel bezel that has no numbers..Looks like new, even after bumping it a few times..
​
https://www.amazon.com/dp/B07PXP4QT3/ref=twister_B07R2CY5YS?_encoding=UTF8&psc=1
I have the older version of this case. It will withstand whatever you throw at. The old model came with two screen protectors and that's what I put on it. The case is a little bulky but it looks good and it matches the black sports band.
Apple Watch Case, Spigen [Tough Armor][Gunmetal][Built-In Screen Protector] EXTREME Protection Dual Layer Cover for Apple Watch 42mm (2015) https://www.amazon.com/dp/B00UVSOWBY/ref=cm_sw_r_cp_tai_YBe7xbF2NFRPB
Band is V-Moro "Gapless" Leather Band https://www.amazon.com/gp/product/B07S4MSZ63/
Bezel is Rinke Bezel GW-46-02 https://www.amazon.com/gp/product/B07LGRHFH3/
Watch Face is Ballozi Granador Watch Face
​
This band is quite comfortable, but I may switch out to the black leather one. Installing the band was an exercise of frustration - following the V-Moro install video didn't help at all, and I spent about half an hour trying to get the bands to fit. I finally got them on by installing them "backwards." Instead of doing the normal way of putting on the non-lever side first than fiddling with the pin to get it in, I installed it lever side first, then used a 1/16 jeweler's flathead screwdriver to pop the other side in. Worked soooo much easier.
Edit: Added modification details.
Monoy wcase-c3 Apple Watch Series 2, 42 mm Case, Monoy New Design Slim Clear 2nd PC Hard Screen Protector for iWatch Series 2, 42 mm 2016 (PC Hard Cas https://www.amazon.com/dp/B01MTL6BRE?ref=yo_pop_ma_swf
Apple Watch Screen Protector (42mm Series 3 / 2 / 1 Compatible), Armorsuit MilitaryShield Full Coverage [2 Pack] Screen Protector for Apple watch 42 mm - HD Clear https://www.amazon.com/dp/B00UH3L82Y?ref=yo_pop_ma_swf
I've worn G-Shocks most of my life. I iust love how bulky they are. I highly recommend Spigen! The case is sold separately from the band but I have piece of mind when wearing it. My only real complaint about it is that the band requires a bit of dexterity to securely fasten. Nothing a little practice won't fix.
https://www.amazon.com/dp/B00UVSNQPM/ref=cm_sw_r_cp_apip_YH6PHVIwdfkXN
EDIT: Link
You could skip the receiver in general if your only input is turntable by buying a turntable pre-amp like this http://www.amazon.com/gp/product/B000A36LQ4/ref=as_li_ss_tl?ie=UTF8&tag=googlcom05-20&linkCode=as2&camp=217145&creativeASIN=B000A36LQ4
Otherwise, I guess I'd do as DrGrinch recommended and use the tape/monitor out on the receiver.
Spigen 40mm rugged armor this is their rugged armor version. They usually have another minimal design they come out with but looks like this one will be out first
Yes, I did the Ringke bezel and really like it. I will try to attach a picture here.
Ringke Bezel Styling for Galaxy Watch 46mm / Galaxy Gear S3 Frontier & Classic Bezel Ring Adhesive Cover Anti Scratch Stainless Steel Protection [Stainless] for Galaxy Watch Accessory GW-46-02 https://www.amazon.com/dp/B07LGRHFH3/ref=cm_sw_r_cp_api_i_G6IXCbW03J7RX
Picture of mine https://imgur.com/a/azSD3Sl
Julk Apple watch 3 case, iwatch... https://www.amazon.com/dp/B075WPCSHK?ref=ppx_pop_mob_ap_share :)
Spigen Liquid Air Armor ftw
https://www.amazon.com/Spigen-Liquid-Designed-Samsung-Galaxy/dp/B07YBMVVLT/ref=sr_1_4?keywords=Spigen+Liquid+Air+44mm&qid=1570640202&sr=8-4
This will do the trick quite nicely.
Apple Watch Case, Spigen® [Rugged Armor] Resilient [Black] - [Include 2 Screen Protectors] Ultimate protection from drops and impacts for Apple Watch 42mm (2015) - Black (SGP11496) https://www.amazon.com/dp/B00UVSNQPM/ref=cm_sw_r_cp_awd_ZJoHwbMA6GVKC
Thanks all for your inputs. I ended up ordering [https://www.amazon.de/gp/product/B00UVSNQPM/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1]
Try this https://www.amazon.com/dp/B07LGRHFH3/ref=cm_sw_r_em_apa_i_wi4YCbM4KC02T?th=1
​
Will then look like this https://i.imgur.com/7rv1Bqp.jpg
I purchased a Spigen Rugged Armor and think it looks great! I didn't really buy it for the protection, but more to make the watch appear a bit larger on my wrist.
Spigen Rugged Armor Apple Watch Case with Resilient https://www.amazon.com/dp/B00UVSNQPM/ref=cm_sw_r_cp_api_Qo8kybDVZTXE9
Caseology or Spigen are my favorites.
Yea its true. I did a few experiments putting it on and off and I ultimately returned it. I believe I have a nickel allergy.
Here's the bezel I bought: Ringke Bezel Styling for Galaxy... https://www.amazon.com/dp/B07LGVRPP3?ref=ppx_pop_mob_ap_share
I just got this one in the mail yesterday, like it so far!
https://www.amazon.com/Spigen-Resilient-Absorption-Protectors-Included/dp/B00UVSNQPM/ref=sr_1_3?s=wireless&ie=UTF8&qid=1506805081&sr=1-3&keywords=apple+watch+case
Hi there, complete newbie here, just ordered a JVC AL-F3 automatic table for my first one. They said it comes with an Audio Technica SLT88E needle/cartridge. I just had a few questions/reassurances from the beginner's guide.
I assume I will need to get a new platter(I think that's what they are called?, the thing that goes below the record)
Do I have to get a new cartridge right away?
I was looking for a preamp for it, was thinking this maybe? Any other recommendations? https://www.amazon.com/TC-750-Audiophile-Phono-Pre-amp-Preamplifier/dp/B000A36LQ4/ref=pd_bbs_sr_1?ie=UTF8&s=electronics&qid=1198035223&sr=8-1&tag=Audioreview-VigLink-Convert-20
also if anybody then had some passive speaker recommendations, something cheap preferred
you can look for an amplifier that supplie phono power which is required to boost the audio signal from the needle or with out it you can use one of these
signal flow would be turntable -> Phono Preamp -> amplifier (rca Cables for all connections)
http://www.amazon.com/electronics/dp/B000A36LQ4
This is the bezel I bought if you're interested in it mate...
https://www.amazon.co.uk/dp/B07PXP4QT3/ref=cm_sw_r_cp_apa_i_N3uWDb6PJCJJ3
40mm version is up for preorder too.
Spigen Liquid Air Armor Designed for Samsung Galaxy Watch Active 2 Case 40mm (2019) - Black https://www.amazon.com/dp/B07YBMX5SQ/ref=cm_sw_r_cp_apa_i_1MULDbMAM8K1E
This one here I like it since always that I wear a watch i hit it everywhere
Looks like this one:
https://www.amazon.com/Ringke-Frontier-Stainless-Protection-Accessory/dp/B07PXP4QT3?th=1&psc=1
I use an Armor suit protective film and a Spigen rugged armor case. The film has adhered well and the case is fairly protective.
https://smile.amazon.com/gp/product/B07HCNHYGW/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
https://smile.amazon.com/gp/product/B07HSS4KYJ/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1
http://www.spigen.com/collections/apple-watch/products/apple-watch-case-tough-armor?variant=1193321617
If you have the 42mm watch, this is a good one. It has a built in screen protector. The Spigen website says it's backordered, but it seems to be in stock on Amazon + it's cheaper there too.
http://www.amazon.com/Spigen®-Protector-Gunmetal-EXTREME-Protection/dp/B00UVSOWBY/ref=sr_1_1?ie=UTF8&qid=1451066119&sr=8-1&keywords=spigen+tough+armor+watch
I don't know everything about preamps, but I've seen these two recommended for a budget:
TCC TC-750 Black $43.50
Behringer PP400 $23.99
You know I got it without knowing I would get an updated version. I bought it thinking that I would have the first gen with the one hole but to my surprise the updated one showed up.
Spigen Rugged Armor Apple Watch Case with Resilient Shock Absorption and 2 Screen Protectors Included for 42mm Apple Watch Series 2 / 1 / Original (2015) - Black https://www.amazon.com/dp/B00UVSNQPM/ref=cm_sw_r_cp_api_57GoybWTK0819
Apple watch Series 2 42MM Case , Monoy 2-Pack (Clear+Grey) New Design Slim Clear 2nd PC Hard Screen Protector for iwatch Series 2 42mm 2016 (PC Hard C https://www.amazon.com/dp/B01MTL6BRE/ref=cm_sw_r_cp_apip_mkwJ4Cn9qoxRp
I was looking at something like this plus a tempered glass screen protector. I haven't seen one for the 44mm yet but I would imagine it's coming out soon since they have the 40mm out.
Amazon Link
I apologize! Here the link:
https://www.amazon.com/dp/B07HNZGB3Q/ref=cm_sw_r_cp_api_tI43Bb04VRD8Q
Here's a $20 option, and here's a $40 option that I'm currently using. If you want to spend more you can. Up to infinity.
It's this one:
https://www.amazon.com/Spigen-Liquid-Designed-Samsung-Galaxy/dp/B07RG48J5Z
It's for the original GWA, but the 40mm GWA2 is identical. They don't have a 44mm version though (yet)
Yeah, this one. Series 1 and 2 are same form factor, so there is no variance in case size/ shape between watch series. You have to use the screen protector that comes with it, though. Any other screen protector that wraps the edges will not work with the case. Just a heads up ;)
No, you can't simply connect the RCA cable to the turntable and the crack, phono voltage out is below 'line level' amounts.
To mirror what /u/andrews013 said, yes the aune is probably the weakest point of your stack. If you want to improve your setup, sell the Aune, buy a proper phono pre-amp such as:
TCC TC-750
Rega Fono Mini (which does have a USB output)
Bugle2
or several others & for dac suggestions I'd probably go with either a Schiit Modi, Henry Audio DAC or JDSLabs Standalone ODAC,
https://www.amazon.com/Spigen-Rugged-Armor-Works-Apple/dp/B07HSS4KYJ/ref=mp_s_a_1_1?keywords=series+4+spigen&qid=1554789699&s=gateway&sr=8-1
Its a protective case. If you don’t want the aluminum frame to be scratched.
TRUMiRR No Gap Band for Galaxy Watch 46mm / Gear S3 with Solid Clips, Quick Release Stainless Steel Watchband Hand Detach Strap Wristband for Samsung Galaxy Watch 46mm R800/Gear S3 Classic/Frontier https://www.amazon.com/dp/B07X8TXGVB/ref=cm_sw_r_cp_apa_i_yLF2DbHJT3XTF
Ringke Bezel Styling for Galaxy Watch 46mm / Galaxy Gear S3 Frontier & Classic Bezel Ring Adhesive Cover Anti Scratch Stainless Steel Protection [Stainless] for Galaxy Watch Accessory GW-46-01 https://www.amazon.com/dp/B07LGVRPP3/ref=cm_sw_r_cp_apa_i_cLF2Db27JS5GE
All the setups I've seen have the ground go to the preamp. I've seen people reference these
Most turntables (including yours) output phono-level and need a preamp to convert to line-level using a phono preamp (like this). Some older receivers have one built into an input labeled phono.
TCC TC-750 BLACK Audiophile Phono Preamp, Pre-amp (Preamplifier) https://www.amazon.com/dp/B000A36LQ4/ref=cm_sw_r_cp_awd_gvH6wbTERGMK9
I use the TC-750 for, you input the two phono ports from the turntable and the output can be connected to the normal AUX or CD line-in on the back of the receiver.
http://www.amazon.com/TC-750-BLACK-Audiophile-Phono-Preamplifier/dp/B000A36LQ4
TCC TC-750
What are some suggestions for receivers?
Turntable will be a U-turn Orbit Plus and I'm thinking of purchasing the TCC TC-750. I haven't purchased the preamp yet, so feel free to suggest receivers with it built-in too.
Got you bro! Spigen Rugged Armor Designed for Apple Watch Case for 42mm Series 3/Series 2/1/Original (2015) - Black https://www.amazon.com/dp/B00UVSNQPM/ref=cm_sw_r_cp_api_i_HVXCDbBHW2GHR
watch
Spigen 42mm
Here's the link, it was actually 14$
Apple Watch Case, Spigen [Rugged Armor] Resilient [Black] - [Include 2 Screen Protectors] Ultimate protection from drops and impacts for Apple Watch 42mm (2015) - Black (SGP11496) https://www.amazon.com/dp/B00UVSNQPM/ref=cm_sw_r_cp_awd_tCvKwbAA6WSE5
I order these protectors (https://www.amazon.com/gp/product/B07MS1CJBM/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1) and this case (https://www.amazon.com/gp/product/B00UVSNQPM/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1)
https://www.amazon.com/gp/product/B00UVSNQPM/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
It's the Spigen Rugged Armor. I bought it here http://www.amazon.com/gp/aw/d/B00UVSNQPM/ref=mp_s_a_1_1?qid=1450043036&sr=8-1&pi=SY200_QL40&keywords=spigen+apple+watch&dpPl=1&dpID=513BWbIeR4L&ref=plSrch
Found this one.
https://www.amazon.com/dp/B00UVSOWBY/ref=cm_sw_r_cp_api_oCnNxb9H2EMV8
And I wear this one. It's a case and strap in one.
https://www.amazon.com/dp/B013H1V5IO/ref=cm_sw_r_cp_api_qGnNxb09NE7E0
case
https://www.amazon.com/Fintie-Lightweight-Polycarbonate-Protective-Packaging/dp/B014HA8RG2/ref=sr_1_1?ie=UTF8&qid=1503455819&sr=8-1&keywords=fintie+apple+watch+cases+38mm
This is the case pack that I got it from
https://www.amazon.com/gp/aw/d/B014HA8RG2?psc=1&ref=yo_pop_mb_pd
OULUOQI Compatible with Apple... OULUOQI Compatible with Apple... https://www.amazon.com/dp/B075XDV5R6
this
nm, I see it. Any other brands?
https://www.amazon.com/Spigen-Rugged-Armor-Designed-Apple/dp/B07HSK96MZ/ref=sr_1_2?s=wireless&ie=UTF8&qid=1540273713&sr=1-2&keywords=spigen+40mm
Spigen [Rugged Armor Apple Watch... https://www.amazon.co.uk/dp/B07HSK96MZ?ref=ppx_pop_mob_ap_share
Spigen Rugged Armor Works with Apple Watch Case for 44mm Series 4 (2018) - Black https://www.amazon.com/dp/B07HSS4KYJ/ref=cm_sw_r_cp_api_i_lFE4CbYFSAAHR
Screen protector I have is IQShield IQ32958 Apple Watch... https://www.amazon.com/dp/B078PVQFJV?ref=ppx_pop_mob_ap_share
I put this guy on my watch on weekends when I’m working around the house and such. Adds bulk, but total protection.
Spigen Rugged Armor Works with Apple Watch Case for 44mm Series 4 (2018) - Black https://www.amazon.com/dp/B07HSS4KYJ/ref=cm_sw_r_cp_api_i_QHZSCbYQW8SGC
https://www.amazon.com/gp/aw/d/B07HSS4KYJ
Get this and don't remove it:
https://www.amazon.com/gp/product/B07HSS4KYJ/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
Could it be this one?
https://www.amazon.com/dp/B07HQHBPS4/ref=cm_sw_r_sms_apa_i_bKPSCbT8YJD2M
https://www.amazon.com/dp/B07LGRHFH3/ref=cm_sw_r_sms_apa_i_3LPSCb78GP3C0
The band was from an older watch I was gifted so I don't know where it's from
Watch strap : https://www.watchgecko.com/butterfly-buckle-solid-5-link-stainless-steel-watch-strap + https://www.watchgecko.com/solid-5-link-ends
Aluminium bezel protector : https://www.amazon.co.uk/dp/B07LGVRPP3/ref=cm_sw_r_cp_apa_i_TOSsDb7ENFMB8
Here you go there are different ones too.
I think they both look kinda cheap and cheesy. Go with this one. https://www.amazon.com/dp/B07LGVRPP3/ref=cm_sw_r_em_apa_i_wi4YCbM4KC02T
Watch Band : Stainless steel watch band from Wish
Bezel: Ringke Bezel
Watchface: Experimental Labs EL-08
here you go
https://www.amazon.co.uk/gp/product/B07LGVRPP3/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1
Watch: Galaxy Watch 46mm (bluetooth edition)
Bezel: Ringke Stainless Steel (46-01): https://www.amazon.de/gp/product/B07LGVRPP3/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Watchband: Stainless Steel Metal Watch Band Strap For Samsung Gear S3 Frontier / S3 Classic https://www.wish.com/feed/recently_viewed__tab/product/590061f18a81cc2a9c1bc252
Watchface: Metro Watch (Free): https://galaxystore.samsung.com/geardetail/com.watchface.Metro
https://www.amazon.ca/gp/aw/d/B07LGVRPP3?psc=1&ref=ppx_pop_mob_b_pd_title
https://www.amazon.de/gp/product/B07LGVRPP3/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
https://www.amazon.ca/Ringke-Frontier-Stainless-Protection-Accessory/dp/B07PXP4QT3/ref=mp_s_a_1_2?keywords=ringke%2Bsamsung%2Bgalaxy%2Bwatch&qid=1557661341&s=gateway&sprefix=ringke%2Bsamsungg%2Bgalaxy%2Bw&sr=8-2&th=1&psc=1
This is the product from Ringke. I can take a shot from an angle later today. It does not look obvious that it is a stick on accessory. In fact when I show my watch to other people, they can never tell it is a separate accessory.
The adhesive for the bezel is one time use, so once you remove it, it cannot be reused.
https://www.amazon.com/dp/B07YBMVVLT/ref=cm_sw_r_cp_apa_i_HbULDb4GS4GWV
Check this one out!
40MM:
https://www.amazon.com/Spigen-Liquid-Designed-Samsung-Galaxy/dp/B07YBMX5SQ/ref=pd_gwm_cr_simh_0?pf_rd_s=blackjack-experiment-1&pf_rd_t=Gateway&pf_rd_i=mobile&pf_rd_m=ATVPDKIKX0DER&pd_rd_wg=uJNjy&pd_rd_r=47B9KMXY04SF96087Q4Q&pd_rd_w=bLAXY&pf_rd_r=HKJCGNNVZWVEKTF4K75X&pf_rd_p=92fc702b-1891-4940-bb1d-723c3e76ea89&pd_rd_i=B07YBMX5SQ
44MM:
https://www.amazon.com/Spigen-Liquid-Designed-Samsung-Galaxy/dp/B07YBMVVLT/ref=sxbs_sxwds-stvp?keywords=galaxy+watch+active+2&pd_rd_i=B07YBMVVLT&pd_rd_r=a4df1966-c068-4674-908a-7a71cdf5804f&pd_rd_w=KMXBY&pd_rd_wg=66GlR&pf_rd_p=d006b618-5fac-44e6-850d-a0fdd19f7847&pf_rd_r=D06X77RN8QFPA3DV7X4W&qid=1572550145&sprefix=galaxy+watch
https://www.amazon.com/gp/product/B07YBMVVLT/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1
Apple Watch Case, Spigen [Rugged Armor] Resilient [Black] - [Include 2 Screen Protectors] Ultimate protection from drops and impacts for Apple Watch 42mm (2015) - Black (SGP11496) https://www.amazon.com/dp/B00UVSNQPM/ref=cm_sw_r_cp_api_04YxxbSGH4R5M
This is the case. I don't remember where I got the band though. Sorry
I have the spigen case, not too bulky. I don't use a screen protector.
Spigen Rugged Armor Apple Watch Case with Resilient Shock Absorption and 2 Screen Protectors Included for 42mm Apple Watch Series 2 / 1 / Original (2015) - Black https://www.amazon.com/dp/B00UVSNQPM/ref=cm_sw_r_cp_api_7ATAybW84TT6N