Reddit mentions: The best applicator tools
We found 10 Reddit comments discussing the best applicator tools. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 9 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. GUGUGI Vinyl Wrap Application Tool Kit Window Film Tint Kit Decal Applicator with Vinyl Knife, Scraper, Felt Edge Squeegee, Knit Work Gloves for Vinyl Wrap, Decals Sticker Installation, Wall Paint
- Adhesive paper install tool kit: Make car window tint/wrapping viny/wallpaper application easy and efficiently.
- Felt squeegee: Will protect the film vinyl away from any scratches/marks during removing air bubbles. Both squeegee edges can be smoothing tools.
- The razor blade cutter knife: Razor blade is hidden inside; Cut car vinyl, film sticker, tint filmvery easily and safe.
- The work gloves will keep your hand clean and safe; Fingerprint will not left on the vinyl film. The yellow scraper can be a decal scraper too, good to clean the glass adhesive.
- Package Included: 1x Safety Razor Cutter; 1x Yellow Scraper; 1x Felt Blue Card Squeegee; 1x Orange Suede Edge Squeegee; 1 pair of Working Gloves.
Features:
Specs:
Color | tool kit A |
2. Car Builder Supply Fiberglass Resin Spreader Epoxy Squeegee Brown 3pc Set
Chemical resistant, acetone, resin, etc.3pc SetFlexible Design for hand LayupCan also be used for body filler applications
3. CRL Tapered End Windshield Stick Setting Tool - Pack of 10
- glass-embedded nylon
- strong and durable 3M product
Features:
4. Permatex 80190 SaferScraper, 2 Refillable Blades
Hard plastic double-edged razor blade is a safer alternative to metal razor bladesIdeal for removing decals, bugs, tar and paint without scratching or harming the body paint underneathSafely removes gaskets from a plastic or aluminum flangeDurable holder designed to fit standard metal razor blades i...
Specs:
Height | 0.5 Inches |
Length | 9 Inches |
Number of items | 1 |
Size | Single Unit |
Weight | 0.06 Pounds |
Width | 3.5 Inches |
5. Miayon Vehicle Vinyl Film Tool Kit, 4PCS Vinyl Wrapping Window Tint Tools for Car Wrapping 1 Set
SCRATCHLESS SQUEEGEE: The suqeegee is covered with a soft felt which can easliy remove bubbles without leaving any scratches for your cars, ideal for car wraps, delicate surfaces, decals, sign making, window tint, etc.REPLACEMENT BLADES:Each blade has 8 razors, if your razor are dull, you could brea...
Specs:
Color | Blue,red |
6. Cotton Auto Detailing Stix (100)
Perfect tool for detailers.Allows you to reach into the tiniest nooks and crannies.Perfect for cleaning wax residue
Specs:
Weight | 2 Pounds |
7. Griot's Garage 10552 Target Tire Dressing Applicator (Set of 2)
Reticulated foam construction ensures durabilityEasily conforms to tire sidewall for efficient application of dressingTarget bull's eye serves as measuring cup
Specs:
Number of items | 2 |
Release date | July 2014 |
Size | Pack of 2 |
8. FIRSTINFO Aluminum Can Pneumatic/Manual Refillable Fluid Pressure Storage Sprayer, 2 Nozzles with Stream and Mist Spraying, with 1 Extra Nozzles
- 💎Versatile Usage -- It's easy and convenient to use in detergent, lubrication, brake system cleaning, anti-rust, etc. Ideal for automobiles, motorcycles, bikes, and vehicles. ** DO NOT recommend to use with only air as an air duster.** DO NOT fill with acetone, corrosive, strong acid, alcohol and alkaline fluids.
- 💎Upgraded Design of Canister And Nozzle-- The thickness of canister is 0.06 inch (1.4mm), much thicker than old ones. Advanced Nozzle with *thread* for conveniently replacement. **With 1 extra nozzle; total 2 pieces of nozzles included.**
- 💎Air Pressure Stuffing, Upside Down Use -- Provides strong output pressure of fluid or air even when held upside down. This pressure aerosol can with the sufficient force for you to spray from any angles without the limitation of space.
- 💎Universal Air Valve Stem/ Must Keep Refilling Pressure for Use -- Refill pressure with universal valve stem for easier to stuff air pressure. It can be refilled pneumatically with an air compressors or manually with a foot pump. Also equipped with the safety valve **Preset 140 Psi (9.65 Bar)**, the excessive pressure will be released automatically when stuffing.
- 💎Refillable, Reusable, Durable-- With the higher quality material of aluminum and o-rings ensures the durability; and 620 c.c. (21 US fl. oz) light weight for conveniently carrying to use with.
Features:
Specs:
Color | Silver |
Height | 3.543307083 Inches |
Length | 11.417322823 Inches |
Number of items | 1 |
Size | Standard with 2 Extra Nozzles-Aluminum |
Weight | 0.62 Kilograms |
Width | 3.149606296 Inches |
9. FOSHIO 3Pack Black 4Inch Automotive Felt Squeegee for Auto Vinyl Wrap Window Tint Tool Wallpaper Tool
- Vinyl squeegee set include 3pcs 4 inch squeegee with micro fiber felt edge. Small size and lightweight makes it easy to use and carry.
- High quality and durable vinyl squeegee conforms the film more reliably into tricky areas and remove the bubbles effectively.
- Felt squeegee with fabric felt edge material will help to prevent damage on vinyl surface and leave no scratch on vinyl surface.
- Vinyl scraper widely used in window tint squeegee, pad pasting, car vinyl wrap, wallpaper pasting, window film, paint protection film, decals, wrap film.
- Vinyl squeegee featuring high-stability twin ribs for easy handling and pressure control. Perfect and durable for all vinyl applications.
Features:
Specs:
Color | 3pcs Black Felt Squeegee |
Height | 0.59055 Inches |
Length | 6.2992 Inches |
Size | 3PCS Black Felt squeegee |
Weight | 0.1763698096 Pounds |
Width | 6.88975 Inches |
🎓 Reddit experts on applicator tools
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where applicator tools are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Yeah, in addition to the vinyl I got from Amazon (link in another comment), I got this vinyl application kit also from Amazon. It's always nice to have an Exacto knife on hand if you need to trim anything by hand.
​
I watched some YouTube videos on how to install vinyl wrap before, this guy does a pretty good job explaining how to do a wrap and has some other great videos related to using the correct tools and techniques for a vinyl wrap application.
Now that you've done structural work, you want to fill the other side. I'm not a fan of bondo (polyester) - it cracks when you look at it wrong and it doesn't bend at all. Polyester fillers are for pinholes at most 1-2mm in diameter.
Instead, use resin mixed with a polyethylene balloon filler - this allows it to be sandable like bondo but takes overnight to set obviously since it's epoxy resin, but actually bonds to the underlying fiberglass and it far more flexible and structurally sound. Mix in around 1:1 with resin, it should nearly stand on it's own (think baking meringue) so it doesn't run when applied to the outer surface of your part. Dry overnight, sand by hand with 80 grit, repeat until you have a surface you are happy with painting.
Bondo is literally the last step you do 1h beforehand, just run it with the rubber squeegee into all the little pinholes.
As for painting, lots of guides on this... Generally you'll want everything at least down to old primer before painting, work through the grits. 80/120/180 at least and 220, you can use a festool or good soft palm sander for big spots like a bellypan but at least 75% of it is done by hand with a soft block and sandpaper. Use your hand or sander around corners and it will not turn out, trust me. Clean meticulously with acetone and then tack wipes before priming. Then sand primer with 120 grit and then paint.
This process took me about 30-35 hours of work over a month, I did around 30 structural repairs and 25-30 fills on the outside.
Parts list:
Last words - patience here. You are the master of the engineered product - you can take it down and add to it as many times as you want if you screw up. Doing the structural repairs in pieces, small batches of resin mixing, just take your time and do a couple hours of work, let it cure overnight, then sand and do some more.
PPE is NOT optional. (masks, gloves, etc).
Also your arms will be itchy from the fiberglass dust for eternity.
Edit: cleaned things up a bit.
The original black stick is pretty good but for bigger things like laptops and monitors you'll probably be better with something like this, some last longer than others but all are disposable, they are soft that's what are made for :)
These are all the things I used
Miayon Vehicle Vinyl Film Tool... https://www.amazon.com/dp/B07JZBM4N9?ref=ppx_pop_mob_ap_share
194 168 T10 2825 W5W LED Bulb... https://www.amazon.com/dp/B076HNCT8H?ref=ppx_pop_mob_ap_share
3M 1080 G13 GLOSS HOT ROD RED 5ft... https://www.amazon.com/dp/B007EF20GQ?ref=ppx_pop_mob_ap_share
In total it’s $30 and changed all shipped
I also used rubbing alcohol, a microfiber towel, and a heat gun (hairdryer works) and a flathead screwdriver time pop out the license plate lights.
Super easy took me about 1:30-2 hours to wrap since it was my first time every wrapping anything. And the bulbs took literally 1 min each
Google search for Detail Swabs or Detail Sticks.
Something like this
Or These
Also depending on the size of the vents, the smallest wheel woolie or similar tool also works really well.
I have goo gone, etc., but I'm afraid that a razor blade will scratch the glass. I think I'll first try with a plastic scraper like this:
http://amzn.com/B005DVHV0S
Thanks for the tips!
I just picked up these:
http://smile.amazon.com/gp/product/B00LJ3C2DA/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Used them once so far, they work well. I have to be careful on my skinny tires though.
Plastic scrapers are the way to go. I used these and these when I did the head gaskets in my Lumina. They get chewed up pretty quickly, but the chisel-type ones can be renewed with a file or grinder, and the scraper one has replaceable blades. Also some CRC Gasket Remover spray and some acetone for the final cleaning will come in handy.
I'm pretty sure your engine has an aluminum block, so definitely try to make sure it's not warped. Mine had a steel block and aluminum heads, plus it didn't overheat, so I bought remanufactured heads from Amazon and took what I felt was the acceptable risk of not having a professional check the block. With an aluminum head and the overheating, I don't think I would be comfortable doing the same.
Something else to consider: your car is pretty old and stuff is probably going to break. No offense meant, just sayin'. I had that issue with my Lumina. The heat shield studs on the exhaust manifold wrung off, with pretty much no hope of drilling them out, so I had to buy a new one. I had to remove the alternator and the bracket broke, then I cracked a couple bolt holes on both the upper and lower intakes. That was due to a crappy torque wrench, which I replaced with a better one before I put on the new manifolds. Factoring in for new tools, I figured I could do the job myself for $1200 or less, but ended up costing almost $1800. By the time I paid my regular mechanic to find the exhaust leak I still had (rear manifold wasn't torqued down to the cyinder head tight enough - damned crappy torque wrench again) I might have saved a couple hundred dollars over what the shop quoted me for the whole repair. I did get some shiny new parts and tools plus a whole lot of valuable experience out of it, so it was worth it.
Just out of curiosity, I checked on remanufactured heads for the b20b, and holy crap are they expensive. You can take your head to a machine shop and have them check it out. It might be fine, or just need the mating surface machined. If it needs rebuilt they'll quote you a price, and you can decide from there if it would be better to snag one off of eBay.
u mean this?
I loved my Otao TGSP but after it cracked a few days ago (my own fault), I replaced it with this one from Amazon:
EyeO2 Screen Protector for Samsung Galaxy S8 Plus 9H Full Adhesive 3D Curved Tempered Glass Guard High Sensitivity HD Full Cover Edge Protector S8+ Protective Film Replacement Accessories Black 2 Pack https://www.amazon.com/dp/B074QN6ZB5/ref=cm_sw_r_cp_apa_uQmJAbVGYV2HM
Getting all the bubbles out was a major pita but it was worth the effort. No weird rainbow streaks & even better touch sensitivity than Otao.
The spatula tool the kit comes with is useless though. I got the bubbles out using something similar to this:
FOSHIO Black Card Squeegee With Green Micro-Fiber Felt Edge 4 Inch Car Vinyl Installing Handy Tool For Auto Vinyl Wrapping, Pack-3 https://www.amazon.com/dp/B06X95N15F/ref=cm_sw_r_cp_apa_PSmJAbHNZRN21