Reddit mentions: The best costume accessoreis for kids

Woot! Did it without adding anything new to my wishlists/linking to nonwishlisted items :D


1.) Something that is grey.


2.) Something reminiscent of rain.


3.) Something food related that is unusual.


4.) Something on your list that is for someone other than yourself.
Tell me who it's for and why. (Yes, pets count!): It's for my roommate because I can't cook to save my life >_<


5.) A book I should read! I am an avid reader, so take your best shot and tell me why I need to read it! That or anything else my Elizibeth Hand- she is amazing. I also highly recommend her wonderful novel on mental illness, Generation Loss


6.) An item that is less than a dollar, including shipping... that is not jewelry, nail polish, and or hair related! $1.35 was the best I could do


7.) Something related to cats. I love cats! (keep this SFW, you know who you are...)


8.) Something that is not useful, but so beautiful you must have it. Both needlessly fancy brads and a coloring book (as if I weren't about to start the semester full time in a couple days. Heh. Leisure time. LOL, that's so cute.)


9.) A movie everyone should watch at least once in their life. Why? I didn't add any movies onto my wishlist because I have Netflix and I never watch the DVD's I have. But everyone should watch Fight Club, The Daparted, Memento, Requiem for a Dream, Night of the Living Dead, and- most importantly, The Lost Skeleton of Cadavra. Go watch it now! To fulfill the scavenger part of the contest somehow, here is a tchotchke from my favorite TV show ever, which has spawned 12 movies, most of which you should see.

So I could be all cheesy and pick a movie that most people have for the most points, like Avatar, Harry Potter, Pirates of the Caribbean, etc, but you know what's more important than winning contests? Revelling in the cinematic beauty that is The Lost Skeleton of Cadavra! Los Skeleton is literally the funniest movie I've ever seen. I remember my abs hurt so bad afterwards from laughing so hard for so long. My friends and I got all these inside jokes that we still use today, ten years later, that still crack us up.
Well, now that I've played it up to a standard that no movie could ever live up to (I'm sorry, I meant no movie except The Lost Skeleton of Cadavra!) so that you'll surely be underwhelmed by it, regardless of the cinematic masterpiece that it is, all I can say is, "Enjoy!"


10.) Something that would be useful when the zombies attack.

Explain.

Because destroy the brain, kill the ghoul, of course.


11.) Something that would have a profound impact on your life and help you to achieve your current goals.. There were a couple of items I could have put here instead: a die cutting machine, an accordion (want. SO. bad!!), a Chromebook, but I think what would really bestow the greatest impact on my life and help further my goals would be a serger. My birthday was a week ago and someone asked me what I wanted to happen this new year for me. I ended up writing a journal page about it, and one of the things was to improve my costuming skills and to finally take them to a professional level that I can be proud of distributing.



12.) One of those pesky Add-On items. So pesky that I made an entire wishlist just for add-ons


13.) The most expensive thing on your list. Your dream item. Why? I love the accordion and I've wanted one for years. I can't explain why. Or Jason Webley is why. Whichever answer you prefer.


14.) Something bigger than a bread box. Hello!


15.) Something smaller than a golf ball.


16.) Something that smells wonderful. I love this stuff!


17.) A (SFW) toy. I apparently have a bunch and they're all in Hebrew. I don't even speak Hebrew O_o


18.) Something that would be helpful for going back to school.


19.) Something related to your current obsession, whatever that may be.. Mixing two of my obsessions and one love all together: scrapbooking, washi tape, and steampunk. Yes.

20.) Something that is just so amazing and awe-inspiring that I simply must see it. Explain why it is so grand.


I don't know if the grandness of Cthulhu slippers needs to be explained. It's Cthulhu...but slippers! :D


Your Name Is Bonus: How about some super good-for-you Melissa supplements?

Oregon Bonus: "harvested in the waters right off the Oregon Coast."


fear cuts deeper than swords. I live you contest idea- this was really fun to do. Thanks! :D

I use hard Wave sticks too and love them. They sand very flat (something I liked files for) but are quite gentle on the plastic in terms of deap scratches. BUT for some reason the 800 grit is disconnected like in your link. Anyone know where else you can get it?

In terms of files I have the Tamiya basic , Tamiya fine basic , and a (hopefully) nicer plastic hobby file on order just to try. Files are nice for larger jobs like serious molding flaws (not common in Bandai kits) and the fine ones are OK for nubs but still quite rough compared to any sanding stick. Although, as you know I'm sure, files last forever and require much less effort and time to chew through plastic. I'm hoping the plastic file is the Holy grail and is a good balance. I bought a set of needle files and diamond files from harbor freight and they blow. The trash just don't grip or cut don't waste your $3.

And as a reference I own Revell, squadron , nail buff sticks, and have made my own sticks from automotive sand paper. The nail files are way too rough imo, making my own is a pain, and while the squadron sticks are nice I mainly only used the tri-grit while I used all the Revell except the roughest and are probably the best value imo. I still use the other more flexible kinds but dramatically prefer wave. Wish the 800 grit still were available.

Long post sorry. Hope it helps

Edits: spelling, phrasing, and lots of links

If you have around a $50 budget for a 4 year old, I would suggest a multi-gift deal, like getting some kind of art kit but I'd say the better idea would be some sort of pony themed bag as a base and then you can put other stuff inside it and the bag is a thing the kid can use for a while.

4 year olds are at the phase in their development where they should be drawing more and developing their pattern skills, so maybe some crayons and a bound sketchbook (4 yr olds don't really have the motor skills to rip paper off crayons if they break, so this set is good bc they can still use them easily if it breaks, plus it being in a case will help even if they eventually end up in the kid's bag, plus this is a pretty good brand).

I think a phonics box would also be a great addition for a 4 year old! Also socks are always a must have in the homeless community, so why not some pony themed socks they sell these in every major department store.

​

If I had a $50 budget for a 4 year old who liked my little ponies that's what I'd get them.

A MLP bag, good crayons, a sketchbook, a phonics case and some socks.

Hope this helps!

​

I love face maasks/clays so much, I use them all the time! I gusse it is a good thing that is what I am going to school for. :P

I would love to try the Rhassoul clay, it sounds amazing!


I love Eeyore and Totoro! They are super duper cute and I just want to hug them alllll the time! XD

I really like that lamp, OP!

If you live near a Target, the wall lamp /u/SirYak mentioned can be had for less than that. I just for one for Christmas after wanting it for ages. I really like it, though they are pretty small. Still, makes a great night light.

He may already have one, but one thing you didn't list that any Thor fan would love is a Mjolnir prop. This one is really good: https://www.amazon.com/dp/B001OOEKJS/ref=cm_sw_r_awd_ljPSub18G5MW0 Great size, plastic, hollow, looks great, and inexpensive.

I started out with two large sheets of plastic canvas and stitched the ends of them together with yarn length-wise. Then I affixed an 8" styrofoam dome to the top of the canvas sheet structure with the use of your typical hardware store screws and anchors to form the cylindrical shape.

After this I cut out the appropriate length of fabric including a separate fabric circle for the top of the head. With little-to-none sewing experience, I haphazardly stitched the fabric onto the plastic canvas structure, which was actually really relaxing as I was binging Super Eyepatch Wolf's Youtube channel during the length of three hours.

For head support, I bought a cheap children's costume army helmet and sanded down the outside of the helmet to prepare for adhesion. Initially my dumbass hot glued the helmet onto an 8" foam ring that was affixed to the center of the cylindrical structure, but this fell apart after day one of the convention. My wife had the brilliant idea to buy a big roll of quilt batting from Walmart that I then stuffed into the mask and hot glued the helmet onto the batting itself. It worked perfectly as whenever I slipped on the mask, the batting would compress so that I could adjust the fit of the mask easily.

The horns were removed from a poorly made Halloween store viking helmet, which removed very easily with little resistance. I then spray painted the horns with black spray paint, followed by a light coating of matte clear coat to take away the shininess. Horns were adhered onto the mask with hot glue, medical tape and cloth pad hot glued, a little bit of red lip gloss courtesy of my wife, and voila, Punpun mask done after a month of occasionally working on it!

Every year, I come home and dress up for the little kids and hand out candy all night. I don't have any costumes- I usually just improvise with colorful shirts and a crown. My favorite though was last year some little girl smiled shyly at me and I heard her say to her mom as they were leaving, "Mommy! There's a pretty angel at that house!" <3

Anywho, this year I wanted to do something a little different. I have lost almost 40 pounds since June and I wanted to show off a little and go out and feel good about myself. So, I found the perfect costume- something that combined my fondness for classic movies and a little bit of sexiness as well- A Dorothy Wizard of Oz costume with just the right style to show off my curves without looking too slutty.

Here it is: http://www.amazon.com/Ruby-Slipper-Sweetie-Costume-Large/dp/B004ZSAJFO/ref=wl_it_dp_o_pC_S_nC?ie=UTF8&colid=2NMB1AXRWT3G5&coliid=I1DU8OTL6ZLZ0Q

It's kind of pricey, but it doesn't come with the shoes (tap your heels 3 times!) http://www.amazon.com/Rubies-Costume-Co-Slippers-Metallic/dp/B002KHA9RK/ref=wl_it_dp_o_pC_nS_nC?ie=UTF8&colid=2NMB1AXRWT3G5&coliid=I2L0319NDTN14O

I'd even be happy with getting Toto! http://www.amazon.com/Wizard-Oz-Dorothys-Toto-Basket/dp/B001E2R2M2/ref=wl_it_dp_o_pC_nS_nC?ie=UTF8&colid=2NMB1AXRWT3G5&coliid=I2W6UK75W65S07

I just have to add, what a lovely contest idea! I can't wait to see what everyone comes up with! Thanks for hosting!

starlord jacket
https://www.axeopco.com/collections/celebrity-jackets/products/guardians-of-the-galaxy-vol-2-star-lord-chris-pratt-maroon-real-leather-jacket?variant=7756186484791

starlord pants (Highly advised to get custom sizing)
https://cossky.com/collections/star-lord/products/guardians-of-the-galaxy-2-peter-jason-quill-starlord-pants-only-cosplay-costume

blasters (Customized and painted by me, I added internal magnets so it mounts to the holsters more securely)
https://www.amazon.com/Rubies-Costume-Guardians-Star-Lord-Blaster/dp/B01N24E63N/ref=sr_1_1?keywords=starlord+blasters&qid=1558097531&s=gateway&sr=8-1

Gloves
https://www.amazon.com/Chris-Guardians-Galaxy-Leather-Gloves/dp/B07HWV7P7B/ref=sr_1_3?keywords=starlord+gloves&qid=1558097686&s=gateway&sr=8-3

Necklaces (I originally 3d printed them but found these and the work a lot better due to them being metal)
https://www.amazon.com/gp/product/B07DL3W59V/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

Communicator pin (once again i origianlly 3d printed this as well but finding the SDCC exclusive pin that is "Screne accurate" how could i resist)
https://www.amazon.com/gp/product/B07H1VX244/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1

Cassette player (I am still trying to aquire an actual TPS-L2 but for photo ops i got the toy and repainted it)
https://www.amazon.com/gp/product/B01MQVYDIJ/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

Headphones (Finding the real headphones is a pain in the ass so I went with the Xcosser ones and they work well for what they need to be)
https://www.amazon.com/xcoser-Headphones-Handmade-Headset-Cosplay/dp/B01AHYVJTO/ref=sr_1_3?crid=17P8XIDN0MVET&keywords=starlord+headphones&qid=1558097996&s=gateway&sprefix=starlord+headp%2Caps%2C124&sr=8-3

Starlord Mask (Drunken amazon shopping got me to purchase the Legends series mask, its awesome but i need to get one made that fits better)
https://www.amazon.com/Marvel-Legends-Star-Lord-Electronic-Helmet/dp/B01MR4MC7O/ref=sr_1_2?keywords=starlord+helmet&qid=1558098035&s=gateway&sr=8-2

Holster clips (3d printed for the Nerf blasters which I have I'm just am trying to modify them heavily, but its a free 3d file from Thiniverse)
https://www.thingiverse.com/thing:1040743

Belt buckle, Earpiece, rocket booster control buttons and ankle rocketes (3d prints from Thingiverse as well)
https://www.thingiverse.com/thing:472807
https://www.thingiverse.com/thing:963928
https://www.thingiverse.com/thing:548474
https://www.thingiverse.com/thing:652268

Infinity orb (purchased from a local vendor at a con, there are free 3d files on thingiverse though)

Groot shoulder mount (Modified to utilize magnets to keep secured on my shoulder instead of the straps it comes with, people love him.)
https://www.amazon.com/Rubies-Costume-Guardians-Shoulder-Accessory/dp/B01N4UPGOA/ref=sr_1_2?keywords=shoulder+groot&qid=1558098698&s=gateway&sr=8-2

Pink is the new black ! Awesome pink sparkle pen, and a pretty great set of pink sparkle wall decals. Fun! Also- pink sparkle butterfly wings might be fun decor for the back of his chair maybe? :)

HAPPY BIRTHDAY! 30 is a good age. You're in your prime. Have a good year, and I hope you get more attention for 31.

My wish list is full of baby gear for my son, who will be born this winter. But I have a few items on there, like this Harry Potter wand and Mardaurer's Map, that are there JUST for me, and JUST to cheer me up and make me happy!

http://www.amazon.com/Harry-Potter-NN7888-Marauders-Map/dp/B0026PW67W/ref=sr_1_1?ie=UTF8&qid=1375733082&sr=8-1&keywords=harry+potter+map

http://www.amazon.com/HARRY-POTTER-inch-collectable-WAND/dp/B000BVYQ9O/ref=wl_it_dp_o_pC_nS_nC?ie=UTF8&colid=2MF6375C6MHWM&coliid=I3AIX3KTJZ3ATQ

It takes a lot of time. You need the right tools. Id' have an exacto knife, some clippers, some files, a good glue, and probably some gap filler. Oh, and a cutting board to work off of.

I linked some examples to give you an idea, you can feel free to find a particular product that works for you, although I do really like the Tamiya glue. There are a lot of little pieces so some people might like some tweezers as well. I use cupcake wrappers to help keep the pieces in one place as I'm assembling and keep them from getting lost. I'd recommend not working over carpet as a dropped piece might get lost forever in there.

As others have said, Vibrant Lantern has some great build guides, which are probably required for more complex models like the Phoenix.

Otherwise, don't let the amount of sprues overwhelm you. Pick a miniature to assemble and finish it before moving on to the next one. Most of them are fairly straightforward. I would really recommend you take your time in assembly, as getting the edges filed and gaps filled will pay off in the long run - nothing worse than a well painted model with gaps and mold lines showing. There are plenty of videos out there on how to do this if you aren't sure or just want some additional instruction.

Start with the White Lion and starting survivors. The Screaming Antelope and Butcher will be the next ones to tackle. All of these are fairly easy to assemble.

Will edit as I go

1. Her name is blue, she is blue, and she sings “blue’s clues,” so...

2. He’a wearing sunglasses, he also sings “In Summer.”

3) These are actually pretty good.

4) My brother is obsessed with these movies.

5) This is a very profound book. Made me feel a full breadth of emotion, and left me satisfied at the end.

6) this decorative fan

7) Your dog could be the pope!

8) I love potatoes. I love plushies. Obvious choice.

9) Jurassic Park is the film that made me fall in love with movies. It’s fun, emotional, and a testament to the ingenuity, curiosity, and perseverance of humanity. Also dinosaurs are in it.

10) After the zombies arrive, I’ll want safe drinking water. It’ll be important, and maybe hard to find occasionally.

11) A new laptop would make being a writer much easier. My current laptop is slow and doesn’t want to work half the time.

12) Lysol wipes are never a bad idea. Trust me.

13) Star Trek is my favorite everything.

14) How about an inspiring dress?

15) Why not both?

16) This stuff. I love it so much.

17) I loved this weird Barbie doll.

18) You know when you’re out in public, and you think of this great idea, but by the time you get home you forgot it and wish you’d written it down? Yeah. I hate that.

19) Here.

20) My dad used to own a pair of these.

Dremmels are great with the right attachment - but I actually just use a set of files like these that are really effective and cheap. The squared off flat one is perfect for filing slightly uneven edges so that pieces meet up better - I use them extensively when modeling forgeworld models and tanks.

You can also use a nail file/emery board, though the hard plastic/resin will wear the emery board down much faster than the nails that they're made for.

Its literally as easy as trying to match up the sides, noting where the biggest protrusions are that are keeping it from being flush, then filing those parts down flat with a couple strokes of the file, re-aligning, repeat until they sit flush.

What model are you working on, and which parts specifically aren't matching up? I might be able to lend more specific advice.

The third item you are describing is an orb.

As for a toy set, I saw none on Amazon, Ebay or Etsy. If you don't care about price or just want some to work off or have as soon as possible, I found the following links.

Gloves: https://www.amazon.com/Princess-Birthday-Wedding-Holiday-Costume/dp/B07NWBN8SD/ref=mp_s_a_1_29?dchild=1&keywords=frozen+coronation&qid=1574564220&sr=8-29

Orb: https://www.ebay.com/itm/2018-Disney-Frozen-Broadway-Musical-Queen-Elsa-Coronation-Orb-Jewelry-Box/174043357449?hash=item2885cae109:g:JlsAAOSwo9Zdi4xk

Scepter (admitedly, it is rather cheap but at least you SHOULD be able to get it before Christmas): https://www.etsy.com/listing/202052032/elsa-coronation-tiara-crown-for-children?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=frozen+coronation+scepter&ref=sr_gallery-1-1&organic_search_click=1

However, if you are willing to wait some time and are fine with giving the set after Christmas, I personally suggest you commission some crafter through Etsy to make the items for you. Look at different Frozen products on Etsy.com and find some crafters/companies whose work you like and then contact them with a picture of the coronation scene so that they know what to reference. I have found that items I had made in this manner to be of good quality and better what you could normally find if you have good communication with the other party.

Depends on what you're looking for!

​

Best of the Best? Korbanth is neat, and they have pretty short lead times. Really nice sabers, but pricy. They have two versions of his saber:

One without Weathering

One with Weathering

I'm still waiting on my graflex from them, but I've been speaking back and forth with Randy and he's always been polite and friendly, and quick to reply! I really appreciate that.

​

If you don't want to spend that much, and don't mind getting exactly what you pay for, there's always the Hasbro sabers.

​

And if you don't want something fully canon, but high quality, you could look at the Aeryn from Sabertrio. They have lots of customizations, and can do their sabers ranging from Stunt Sabers (Without sound) and Deluxe Sabers (High quality blades, sound, the whole shebang)

1. Not sure if this counts, but I'm getting it for my boyfriends birthday...
   
   
2. Simon Pegg is English, Game of Thrones is English, and I need a beanie
   
   
3. I will write a book on this and I'll read it? God, I'm sorry, This is horrible.
   
   
4. Ha! Bet you weren't expecting these, were you?
   
   
5. I need a new flash drive...
   
   
6. The Knight Bus is purple.
   
   
7. A game.
   
   
8. I love steampunk.
   
   
9. A Dremel
   
   
10. Triforce key chain.
    
    
11. I can organize my DnD dice?
    
    
12. DnD is a hobby. Right?
    
    
13. This is kinda nerdy...
    
    
14. Turtles are totally natural.
    
    
15. Cthulu is very green.
    
    
16. Shirt
    
    
17. I find this funny
    
    
18. I'm still scared of the dark, and I could string these together as beads...
    
    
19. I can cut down some trees?
    
    
20. I need one of these
    
    Bonus:Mats?
    
    Happy happy cakeday!!!!!
    
    

If you want her to look sexy in it I would suggest finding a very skimpy and tight brown dress that you could add a few spots to. Remember scooby doesn't have a lot of spots and their mostly on his back so don't go overboard with them. I found ears and a tail for cheap http://www.amazon.com/Puppy-Dog-Ears-Headband-Tail/dp/B002CJ5M8W. Also if you want to add a nose to make the costume more complete theirs this http://www.amazon.com/brandsonSale-Pet-Dog-Costume-Nose/dp/B000W0OHZ2/ref=pd_sim_t2. As for the collar, I can't find one that cheap, but from the looks of it you could buy a blue/greenish colored one at walmart or a pet store and make the emblem at home. Good luck and have fun! Don't forget to post some pics!

I'd like to nominate rose_tyler_fan for Mother's Day for a Sirius Black wand. I don't know her, but she seemed very nice. =)

Thanks for the contest!

Sandpaper is really cheap at the hardware store, just get some varying grits (i go up to 1500). If you want files, you can probably find some good hobby ones, I use the tamiya file set. If you are going to be disassembling your kits for painting or whatever reason, spudgers are very helpful. Definitely top coat, Krylon Matte and Clear top coats are good, there are more hobby specific coats that are very good, but more expensive. Panel lining supplies are also good, either pens or ink for a panel line wash. Alligator clips on sticks are also handy if you are going to be top coating

I was wondering if i can trust this seller?

​

I am trying to buy an infinity gauntlet replica, this one has an insane discount but I am none the less doubtful, can I get some help? The name is frog fun. here is a link: https://www.amazon.ca/gp/product/B071WT4KLM/ref=ox_sc_act_title_1?smid=A2LU61D8LAFXO3&psc=1

Thanks!

Congrats! Keep us posted, it's always fun to see how peoples' journeys differ. I picked up a $9 set of files from Tamiya and it changed my skills almost instantly. They remove nubs much faster than any sandpaper, if you can get ahold of them I'd recommend also grabbing a higher grit sandpaper pad as well from a hobby store. Do a rough cleaning with the metal files then clean it up with increasingly higher grit sanding pads.

You can get seriously clean models if you use these tools right.

Easy enough to do would be order her a Noble Collections Replica Sirius Black wand. Hot Topic has a Gryffindor House cardigan, or a House varisty jacket. One recent thing I've liked looking into it leather bound versions of HP books, there's a custom Standard Book of Spells available on eBay for another month (I wish I could say I'd have my custom leather-bound version of the Tales of Beedle the Bard done soon, but all my progress got reset due to financial issues). Also on eBay, plenty of times over, are sets of Wizard coins.

Hopefully this helps to some degree.

Get him pokeballs! That way him and his friend can throw them around and play pretend. I just got a little set of them for my own nephew. These ones are made of foam so they're okay to throw without hurting anyone.

Or a belt with pokeballs like this one would be cool too.

Damnyoureloud you are awesome for having a contest after all your amazing ness.

Ill give it it whirl. Here is my item and fortissimo thank you !!!!!

https://www.amazon.com/gp/aw/d/B017KIQOSQ/ref=psdcmw_166038011_t1_B0071NORX0

They are meant to mainly be shown off, but have much better lighting then duelling ones and can withstand some lighthearted dueling

In that case, have you tried using a file? Something like these: https://www.amazon.com/Tamiya-America-Basic-File-TAM74046/dp/B000BMUONA

I generally only use the one on top in the image. It's flat on one side and rounded on the other. Depending on the nub location I'll use either side, flat if there's a larger piece of nub then switch to the rounded side as I get closer to the part. I find the rounded part helps to avoid filing away the part itself as you get closer to it. The tapered end is good for tougher to get to places.

I've used the fully rounded one once and the big squared off flat one I almost never use. I find I end up scratching the part with it.

Hopefully they have a Marvel Legends version like the OG Infinity Gauntlet (https://www.amazon.com/Legends-Infinity-Gauntlet-Articulated-Electronic/dp/B071WT4KLM)

I’m going to a Poke-Party!

I would dress as my GO avatar complete with a belt full of poke balls.

I would bring each of my children dressed as a first gen starter. My oldest would be charmander, my daughter would be squirrel and my little guy would be bulbasaur.

I would bring a semi-healthy snack and we’d play pin the tail on the pikachu to see who would win this.

Edit: I used to live in prime Pokémon GO territory. I had a gym in my driveway and a stop in my dining room and would set up a sign with the WiFi password and invite my friends over for some GO time and drop some lures.

Buy time machine from mzad qatar and Go back to the reality where captain america restored all the stones.

​

or

https://www.amazon.com/Legends-Infinity-Gauntlet-Articulated-Electronic/dp/B071WT4KLM

Original Marvel item.

170 usd (620 QAR) including shipping to Qatar

This should be a better quality purchase. I have the tamiya files and use them frequently when I remove nubs prior to sanding. With metal files, my advise is to not OVERDO it - after shaving with a hobby knife, a few passes with the file is necessary to completely level the nub. If you overdo it, you will scrape off excess plastic. Just be careful :)

Thanks!

It's a Marvel Legends Gear Captain America Shield Replica.
Link: https://www.amazon.com/Marvel-Legends-Captain-America-Shield/dp/B01B4NLML2

Sweet! I got it about a year ago from Amazon.com. To my knowledge there’s only the two versions. I believe it was this seller. It’s definitely the same box mine came in.

It's ridiculously loud, but a great piece. Here you go.

Hermione Granger's wand replica.
http://www.amazon.com/Harry-Potter-Hermoine-Grangers-Ollivanders/dp/B000BVYQ9Y/ref=wl_it_dp_o_pC_nS_nC?ie=UTF8&coliid=I222PQ1FVJ24RS&colid=1W1CRX50W3Q9U
I've always wanted to buy it because it's awesome and so very detailed but then I don't really need it but then it would complete my Halloween costume but I don't have the money to buy it...
Yeah.

Looks like $99

Marvel Legends Series Infinity Gauntlet Articulated Electronic Fist https://www.amazon.com/dp/B071WT4KLM/

While the love shines through your efforts, it is possible to buy this online: https://www.amazon.com/Hermione-Grangers-Wand-Ollivanders-Box/dp/B000BVYQ9Y

Honestly... at face value the kit looks okay but it probably comes with a lot of cheap crap you might not care about. I saw this in the similar section and I reckon that's enough if you wanna save a few more bucks and are keen on a set.

But if you're already willing to spend $20-30 then you can get what I suggested within that budget along with the knife you linked to (this and this, there's a few sellers for each you can get via Prime). That and some sandpaper from your hardware store and you'll be good to go dude.

Ultimately don't worry too much about the tools. You can make do with just sandpaper, a hobby knife and a crap pair of wire cutters and still do fine. Hell, that's all I had when I was a kid lol :P

I got it off Amazon. It was on sale and I had a few gift Cards with a couple dollars left over. In total only cost me 25$

[Amazon](https://www.amazon.com/dp/B071WT4KLM/ref=cm_sw_r_cp_api_i_4pAWCb2G7R3HB

Well, for all the walking he does to get Pokémon, how about these?

Or if one is trapped inside, and there are no Pokémon to be had...you can create your own by beaning someone with this...

...and lastly, this is just amazing.

This is a bit off topic but I like that they at least tried to give her an accurate wand.

Soon you'll be able to buy a good cosplay version of it. [Shield]
(http://www.amazon.com/Marvel-Legends-Captain-America-Shield/dp/B01B4NLML2/ref=sr_1_3?ie=UTF8&qid=1457666021&sr=8-3&keywords=captain+america+shield)

DUDE!!!!

https://www.amazon.com/gp/product/B01B4NLML2/ref=od_aui_detailpages00?ie=UTF8&psc=1


It's listed here for $99 directly from Amazon!!

heres some stuff for you two


[site with loads of stuff] (http://baby-pants.com/)

[pink pacifier] (http://www.amazon.com/Personalized-Baby-Girl-Princess-Pacifier/dp/B00205JY78)

[purple butterfly style diaper] (http://www.llmedico.com/product/36/gary-adult-butterfly-style-cloth-diapers/)

[clear pacifier with blue/white strap] (http://www.amazon.com/Spirit-Carolina-Binkmeister-Pacifier-Closure/dp/B00E4PZBX8/ref=sr_1_3?ie=UTF8&qid=1383186499&sr=8-3&keywords=blue+white+pacifier)

[blue duck pyjamas] (http://www.cuddlz.com/blue-duck-print-adult-onesie-all-in-one-footed-sleeper/)

[hello kitty bottle] (http://www.amazon.com/Sanrio-Hello-Kitty-Feeding-Bottle/dp/B0096YQAXC/ref=sr_1_19?s=baby-products&ie=UTF8&qid=1383186663&sr=1-19&keywords=cute+baby+bottle)

[diapers] (http://www.abuniverse.com/products/abu-sdk.asp)

[more] (http://www.abuniverse.com/products/AbenaAbriFlex.asp)

[girly diapers] (http://www.abuniverse.com/products/abu-sissy.asp)

[hippo plushie] (http://www.amazon.com/Hagen-Dogit-Luvz-Plush-Hippo/dp/B0032GG59E/ref=sr_1_16?ie=UTF8&qid=1383187551&sr=8-16&keywords=stuffed+animal)

[huge pink monkey] (http://www.amazon.com/Lambs-Ivy-Lollipop-Jungle-Monkey/dp/B002T7CNNE/ref=sr_1_1?s=toys-and-games&ie=UTF8&qid=1383187638&sr=1-1&keywords=stuffed+animal)

[blue elephant plushie toy and blanket] (http://www.amazon.com/Zoobie-Ellema-Elephant-Pillow-Blanket/dp/B000PDHYBK/ref=sr_1_61?s=toys-and-games&ie=UTF8&qid=1383187710&sr=1-61&keywords=stuffed+animal)

[pink flower pacifier] (http://www.amazon.com/RaZbaby-Keep-It-Kleen-Pacifier-Flowers-Hearts/dp/B0058O7KL0/ref=wl_mb_recs_29_dp)

[some straight up husky furry suits] (http://www.donthugcacti.com/gallery/index.php/Huskies)

[furry stuff] (http://www.savageturtlestudios.com/store)

[teething ring necklace] (http://www.amazon.com/Smart-Mom-Teething-Shimmer-Necklace/dp/B007AKCIOO/ref=sr_1_9?ie=UTF8&qid=1383188396&sr=8-9&keywords=adult+teethers)

[blue overalls] (http://www.amazon.com/Baby-Pants-Adult-Shortall-Denim/dp/B00E2TXGRO/ref=sr_1_19?ie=UTF8&qid=1383188589&sr=8-19&keywords=adult+baby)

[princess diaper cover] (http://www.amazon.com/Training-Panties-Diaper-Princess-Design/dp/B00A4H6EHW/ref=sr_1_29?ie=UTF8&qid=1383188589&sr=8-29&keywords=adult+baby)

[plastic diaper cover] (http://www.amazon.com/Baby-Pants-Carousel-Pullon-Plastic/dp/B003MHFOEU/ref=pd_sim_sbs_hpc_8)

[body wash] (
http://www.amazon.com/Baby-Magic-Gentle-Original-30-ounce/dp/B003SD93HM/ref=sr_1_41?ie=UTF8&qid=1383188887&sr=8-41&keywords=adult+baby)

[baby socks] (http://www.ebay.com/itm/CUSTOM-MADE-ADULT-SISSY-WOMENS-MENS-TV-CD-CUTE-SEXY-BLUE-SATIN-BOW-ANKLETS-SOCKS/251251837245?rt=nc&_trksid=p2047675.m1851&_trkparms=aid%3D222002%26algo%3DSIC.FIT%26ao%3D1%26asc%3D18242%26meid%3D2362103283810680927%26pid%3D100005%26prg%3D8344%26rk%3D3%26rkt%3D4%26sd%3D251068252673%26)

[pink butterfly shirt] (http://baby-pants.com/shirts.php)

[furry cat hat and gloves] (http://www.amazon.com/FUR-ANIMAL-PINK-UNISEX-GLOVES/dp/B00A7GY65W/ref=sr_1_17?s=apparel&ie=UTF8&qid=1383190124&sr=1-17&keywords=furry+gloves)

[long black cat gloves] (http://www.amazon.com/Leg-Avenue-Costumes-Length-Glitter/dp/B00BN3EH2A/ref=sr_1_40?s=apparel&ie=UTF8&qid=1383190124&sr=1-40&keywords=furry+gloves)

[onezies] (http://baby-pants.com/onezie.php)

[pink flower pacifier] (http://www.amazon.com/RaZbaby-Keep-It-Kleen-Pacifier-Flowers-Hearts/dp/B0058O7KL0/ref=wl_mb_recs_29_dp)

[lace romper] (http://www.amazon.com/Petti-Romper-Extra-Large-Light/dp/B00BJOHYUU/ref=sr_1_sc_1?s=apparel&ie=UTF8&qid=1383190783&sr=1-1-spell&keywords=extra+largegirly+baby)

[lace diaper cover] (http://www.amazon.com/Light-Diaper-Cover-Bloomer-Months/dp/B0070B2578/ref=pd_sbs_a_39)

[cheaper lace socks] (http://www.amazon.com/Girls-White-Ruffle-Dress-Pearls/dp/B00DIGU59E/ref=sr_1_6?s=apparel&ie=UTF8&qid=1383191076&sr=1-6&keywords=lace)

[lace gloves] (http://www.amazon.com/Lace-Gloves-Girls-Wrist-Length-White-L/dp/B002DGABLC/ref=sr_1_10?s=apparel&ie=UTF8&qid=1383191076&sr=1-10&keywords=lace)

[red skirt with belt] (http://www.amazon.com/My-Michelle-Girls-Tiered-Medium/dp/B00CXO21JO/ref=sr_1_19?s=apparel&ie=UTF8&qid=1383191329&sr=1-19&keywords=lace)

[eeyore ears and tail] (http://www.amazon.com/Elope-Winnie-Pooh-Eeyore-Ears/dp/B003IBI0Z0/ref=sr_1_2?s=apparel&ie=UTF8&qid=1383191678&sr=1-2&keywords=Eeyore)

Marvel Legends Captain America Shield (plastic) for $54

https://www.amazon.com/Marvel-Legends-Captain-America-Shield/dp/B01B4NLML2/ref=pd_sbs_21_21?_encoding=UTF8&psc=1&refRID=RQ2EQMMJY4SRBQ4RWH8T

Additional tools I would add if you have more money

Assorted Sandpaper $5 will last you a long time if you cut the strips. 800 and 1000 is all you need

Tamiya Model File set $9, You really only need the flat one

For decals
Q-tips for applying decals, I recommend you get two sizes ( i like the mini ones since they have less hairs)

Self healing cutting mat

Mr Mark Setter and Mr Mark Softener for rounded edges

I use a file set to get rid of most of them. Blade are great, but sometimes they are just too fat to get into the little spaces.

https://www.amazon.com/Tamiya-300074046-Basic-File-Set/dp/B000BMUONA

Looks like it could be this?

https://www.amazon.com/Avengers-Infinity-Gauntlet-Articulated-Electronic/dp/B071WT4KLM

It has the same protrusion under the soul stone

You should get her a Snitch Necklace!!

There is a wide variety of 'Snitch' designs in Etsy. And on Etsy you can categorize by shipping worldwide or not. Also you can get it on Amazon. I believe some of them ship from China

http://www.amazon.com/Potter-Enchanted-Steampunk-Necklace-Battery/dp/B007RBMP9E/ref=sr_1_69?ie=UTF8&qid=1371501928&sr=8-69&keywords=harry+potter

Amazon. $76.
https://www.amazon.com/Legends-Infinity-Gauntlet-Articulated-Electronic/dp/B071WT4KLM/ref=sr_1_1?crid=3RI1AKUG7GABW&keywords=marvel+legends+infinity+gauntlet&qid=1556319313&s=gateway&sprefix=marvel+legends+inf%2Caps%2C143&sr=8-1

Yea i saw this under the recommendation with the tamiya nippers. Thought it might be a good buy, still undecided and processing all the input.

http://www.amazon.com/Tamiya-300074046-Basic-File-Set/dp/B000BMUONA/ref=pd_bxgy_21_img_3?ie=UTF8&refRID=0HVB95284PC6SJSVYT0Y

Occasionally gets below that on Amazon.

https://camelcamelcamel.com/Star-Wars-Black-Skywalker-Lightsaber/product/B017KIQOSQ

Maybe try waiting for the May 4th sales?

Amazon linkage

I just bought mine off of Amazon. Part of the legends series. https://www.amazon.ca/gp/aw/d/B071WT4KLM/ref=mp_s_a_1_1?ie=UTF8&qid=1523908372&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=infinity+gauntlet

Are those finer than the basic set that tamiya has? I've been using the basic set here https://www.amazon.com/dp/B000BMUONA/ref=cm_sw_r_cp_awd_jiIBwbRBX5X36 and I can't tell from the photos on Amazon if they're different. I'm assuming finer.

Is this the set you're referring to? https://www.amazon.com/Tamiya-300074046-Basic-File-Set/dp/B000BMUONA/

You could get this one! Down from $99 to $52 - https://www.amazon.com/gp/aw/d/B01B4NLML2

I was looking at a set of files from Tamiya. Would this be a good set as apposed to sand paper?

https://www.amazon.com/Legends-Infinity-Gauntlet-Articulated-Electronic/dp/B071WT4KLM/ref=sr_1_1?ie=UTF8&qid=1523908034&sr=8-1&keywords=infinity+gauntlet

Most of those look too coarse. Also, kind of pricey. Try these by Tamiya.

https://www.amazon.com/Marvel-Infinity-Gauntlet-Articulated-Electronic/dp/B071WT4KLM

Hasbro makes it. Part of their adult role-play line for the MCU. They have Iron Man's helmet, Cap's shield, Star-lord's helmet and Mjolnir so far. All retail for $99 so don't pay a lot more. You can get them online or at Toys R Us.

https://www.amazon.com/Marvel-Legends-Captain-America-Shield/dp/B01B4NLML2

Give tamiya a shot
https://www.amazon.com/dp/B000BMUONA/ref=cm_sw_r_cp_apa_i_p1o-Ab8R31PV5

Harry potter necklace!

https://www.amazon.com/Noble-Collection-Hermione-Grangers-Ollivanders/dp/B000BVYQ9Y/ref=sr_1_6?ie=UTF8&qid=1541519223&sr=8-6&keywords=interactive+wands+universal+studios&dpID=415eZNH681L&preST=_SY300_QL70_&dpSrc=srch

If this is the one you found, it is the correct one.

Compare to this.

Was it this one, this one, or this one (nsfw)?

https://www.amazon.com/Star-Wars-Black-Skywalker-Lightsaber/dp/B017KIQOSQ/ref=sr_1_2?s=toys-and-games&ie=UTF8&qid=1496212732&sr=1-2&keywords=luke+skywalker+lightsaber

Its this one: https://www.amazon.com/Legends-Infinity-Gauntlet-Articulated-Electronic/dp/B071WT4KLM/ref=sr_1_1?ie=UTF8&qid=1549912370&sr=8-1&keywords=hasbro+infinity+gauntlet

for $100, you could get her that [Captain America Shield] (https://www.amazon.com/Marvel-Legends-Captain-America-Shield/dp/B01B4NLML2) or the Iron Man helmet

There is another.
https://www.amazon.com/Marvel-Legends-Captain-America-Shield/dp/B01B4NLML2/ref=pd_bxgy_21_img_2?ie=UTF8&psc=1&refRID=ZB9QY9V7839J7YJXGJR0
edit: and I just realized the cheaper one is NOT metal. Ok, so I am pre-ordering the metal one at least until some reviews start coming out for it, I already have the King Arts Winter Soldier one so Ill have to decide if I actually get this one.

Wrong sub , but my cousin bought this one , it comes at a hefty price

Oddly enough the elder wand I have doesn't have any name plate and/or clip with dumbledors name on it. And I don't see it online either. Do you have a picture of what you're referring to? I'm looking at hermione's noble collection wand and don't see a name plate either.

edit: here is hermione's. https://www.amazon.com/Hermione-Grangers-Wand-Ollivanders-Box/dp/B000BVYQ9Y/ref=sr_1_4?s=toys-and-games&ie=UTF8&qid=1542843094&sr=1-4&keywords=hermiones+wand

edit edit: nvm the box outside of the box, the white box, has dumbledor's name, but no name plate or clip...