Reddit mentions: The best electronic cooling fans
We found 22 Reddit comments discussing the best electronic cooling fans. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 5 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. NTE Electronics 77-4010D24 High Speed Fan, Ball Bearing, Thermal Plastic Wire Lead, 40 mm L x 40 mm H x 10 mm T, 24 VDC, 7000 RPM, 7.73 CFM
- High Speed
- Ball Bearings
- 26 AWG Red (+) and Black (−) Leads
- 11.8" (300mm) Lead Length
Features:
Specs:
Number of items | 1 |
2. 4 Hand-Held Avon Sun Mini Sport Fans
- Star wars han solo costume
- Package contains shirt with attached vest and pants with attached boot tops
- Officially licensed product
- Look for coordinating star wars costumes and accessories from Rubie's costume company
- Rubies' collection represents more than six decades of bringing you quality products, innovation, and value for every costume occasion
Features:
3. ORION FANS Case Fan OD4010-24HSS | 24VDC | 0.09A | 40x40x10mm | 6.7CFM | 25dBA | 6000 RPM | Wire Leads | Crosses with 414 (EBM/PAPST)
Flow Rate: 6.7 CFM | 6,000 RPMFlow Rate: 6.7 CFM | 6,000 RPMAgency Ratings: ULCross with EBM/PAPST: 414
Specs:
Color | Black |
Weight | 0.0440924524 pounds |
4. SUNON KDE0505PFV1 11.MS.A.GN DC Brushless Tubeaxial Fan, 16" Leads Connection, 38 dBA, 50 mm L x 50 mm W x 10 mm H
- Vapor bearing
- 13 cfm air flow
- 38 dba noise
- Voltage (vdc) 5
Features:
Specs:
Number of items | 1 |
Weight | 0.0475 Pounds |
5. SUNON ME60151V1-0000-A99 DC Brushless Tubeaxial Fan, 12" Leads Connection, 25.2 CFM, Vapo Bearing, 1.92 Watt, 36.2 dBA, 60 mm L x 60 mm W x 15 mm H
- Vapor bearing
- 25.2 cfm air flow
- 36.2 dba noise
- Voltage (vdc) 12
Features:
Specs:
Number of items | 1 |
Release date | March 2017 |
Weight | 0.09375 Pounds |
🎓 Reddit experts on electronic cooling fans
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where electronic cooling fans are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Thanks for the information!
​
Fot the Hero me, i need this fan?: https://www.amazon.co.uk/gp/product/B07BS8334N/
Or this kind? https://www.amazon.com/gp/product/B00ZSA83EW/ref=ppx_yo_dt_b_asin_title_o09__o00_s00?ie=UTF8&psc=1
​
I am litle confused about the correct fan! Thanks
Spare Goggles
I like this brand to keep as a loaner. I keep 2 spares in the duffel in case mine goes down or if the a player forgets his/hers. Inexpensive, dual pane + anti-fog only kills out if you are pouring sweat, and fits asian faces very well.
Handheld Fans
Great for warm or humid days and you can't take off your gear to cool down. I keep a G&P Distress marker fan on me to cool down between rounds.
Electrolyte Gel Packs
Great for keeping cramping and general dehydration down. Gatorade works too, but I keep these in handy for people who only drink water all day and begin to look flushed.
I'm in the middle of converting mine to an e3d v6 clone, bullseye mount, bltouch clone (that I had working well before), stock parts cooling fan and this 40mm heatsink fan:
https://www.amazon.com/gp/product/B00ZSA83EW/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1.
How are you mounting everything?
Extruder fan? If it's anything like the creator pro, I used this 24v fan.
I just installed this fan. Still on first print, but so far it's very quiet and might have fixed my intermittent under extruding issue that I believe was caused by PTFE tube overheating.
ORION FANS Case Fan OD4010-24HSS |... https://www.amazon.com/dp/B005T7CQHO?ref=yo_pop_ma_swf
Here is a quickly made fan blade based on a render of the Ender 3. It's assuming that your hotend fan blade broke, not part cooling. I have no clue if it will work or not. Use super glue to attach it. https://www.thingiverse.com/thing:3758044
Honestly, it probably won't work out well. You might consider a replacement fan from Amazon. But this might get you going.
I replaced my hotend fan with this
https://www.amazon.com/gp/product/B00ZSA83EW/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1
All are sunon fans.
I screwed up on what I'm getting for ps fan, you need the ones listed above.
Edit: tried a thicker 25mm ps fan, it's a nogo, get the 15 mm one listed above.
https://smile.amazon.com/gp/product/B00ZSA83EW/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1