Reddit mentions: The best faucet stems
We found 26 Reddit comments discussing the best faucet stems. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 15 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Perlick Perl Draft Beer Faucet- Chrome Plated Brass
- Glass hydrometer
- Plastic storage tube
- Reads brix/balling and potential alcohol scales
Features:
Specs:
Number of items | 1 |
2. Frost King FC1 Outdoor Foam Faucet Cover, Oval
- The product is manufactured in China
- The product is highly durable and easy to use
- Easy installation and easy handling
- The product is manufactured in China
- Easy installation and easy handling
- Protects outdoor faucets from extreme temperatures
- 5/8-inch expanded polystyrene shell
- Protects outdoor faucets from extreme temperatures
- 5/8-inch expanded polystyrene shell
- 3/4-inch one piece foam gasket
- Comes fully assembled
- Reusable season after season
Features:
Specs:
Color | No Color |
Height | 7 Inches |
Length | 6 Inches |
Weight | 0.03 Pounds |
Width | 6 Inches |
Size | No Size |
Number of items | 1 |
3. Pfister 974-3750 Stem Extension Kit with Stem Extension, Sleeve Extension and Screw
Ashfield/ Bedford/ Catalina/ Contempra/ Kenzo/ Parisa/ Santiago CollectionTraditional / ClassicSpare parts
Specs:
Height | 0.75 Inches |
Length | 4.5 Inches |
Weight | 0.02 Pounds |
Width | 4.5 Inches |
Number of items | 1 |
4. LASCO 0-4031 4-1/8-Inch Long Sterling Hot Side Square Broach Washerless Stem
- Two handle shower
- Washer less, Hot side
- Brass, square broach, plastic bottom
- 4-1/8-Inch in length
- OEM Part # SRA-3269
Features:
Specs:
Height | 4.5 Inches |
Length | 1 Inches |
Width | 1 Inches |
Number of items | 1 |
5. Danco 18553B 3Z-13H/C Hot/Cold Stem for Grohe Faucets
Durable brass constructionFits Grohe kitchen Series 20.100, 20.300, 20.400, 31.000, 31.7000, 31.800Fits Grohe Lavatory Series 20.100, 20.800,21.100; Bidet Series 7.500, 24.400For hot and cold water applicationsID length 3, broach ZComplies with the reduction of low lead in drinking water act
Specs:
Height | 2 Inches |
Length | 2 Inches |
Width | 0.625 Inches |
Number of items | 1 |
6. Danco 15363B 7E-1H Union Gopher Stem
Right hand hotFor bath models: 30-2, 3, 4 and 5Fits Union Gopher bathIncludes seat
Specs:
Height | 6.25 Inches |
Length | 1.5 Inches |
Weight | 0.15 Pounds |
Width | 1 Inches |
Size | Pack of 1 |
Number of items | 1 |
7. Frost King FC1 Outdoor Foam Faucet Cover, Oval 3 pack
Protects outdoor faucets from extreme temperatures5/8-inch expanded polystyrene shell3/4-inch one piece foam gasketComes fully assembledReusable season after season
8. Pfister 9103000 Roman Tub Compression Stem
Roman tub compression stem for hot or cold9103000 stem compatible with valves installed prior to year 2000Pfister Pforever Warranty covers finish & function for lifeGenuine Pfister PartSold individually
Specs:
Is adult product | 1 |
Height | 1 Inches |
Length | 10 Inches |
Width | 4 Inches |
Number of items | 1 |
9. BrassCraft ST1280X Cold Ceramic Faucet Stem for Price Pfister Faucets, Treviso
- The product is easy to use
- The product is highly durable and handle
- The product is manufactured in China
- Model number: ST1280X
Features:
Specs:
Color | Gold |
Height | 2 Inches |
Length | 2 Inches |
Width | 0.93 Inches |
Number of items | 1 |
10. BrassCraft Mfg ST0849X Hot/Cold Stem for Price Pfister Faucets
Made in TaiwanPackage length : 3.875"Package width : 1.875"Package height : 1.375"
Specs:
Height | 1.375 Inches |
Length | 1.9 Inches |
Weight | 0.1 Pounds |
Width | 1 Inches |
Number of items | 1 |
11. Delta Faucet RP25513 Stem Assembly, One Size
Genuine Delta repair partSturdy stem unit assemblyFor replacement in two handle faucetsBrass stem and stainless steel plate add extra strengthHelps keep a faucet running smoothlyPart will have either black or beige color
Specs:
Color | Chrome |
Height | 4.88 Inches |
Length | 2.13 Inches |
Weight | 0.2 Pounds |
Width | 1.25 Inches |
Size | One Size |
Number of items | 1 |
12. Danco, Inc. 80794 Faucet Stem Packing, 3/32 in Dia X 36 in L, PTFE, White
Can be used with many gaskets and packing valvesValve packing forms leak-tight sealsPliable construction3/32 in. diameter36 in. lengthUniversal design
Specs:
Color | White |
Height | 4.2 Inches |
Length | 1 Inches |
Width | 1.7 Inches |
Size | 3/32"x36" |
Number of items | 1 |
13. American Standard 072950-1700 Hot Side Stem
Consumer PackUse for lavatory faucetsHot side onlyGenuine American Standard part
Specs:
Height | 0.9 Inches |
Length | 3.9 Inches |
Width | 1.9 Inches |
Number of items | 1 |
14. Arrowhead PK8004 Replacement Stem for 4-Inch 450 and 480 Series FF Hydrants, 8-Inch Total Length
Hose bibs and most products are excluded from the requirements of being "lead free"Arrowhead has residential, retail and commercial productsValves are not intended to be used for potable (drinking) water applicationsMeasure the thin copper tube only and make sure to subtract 2" from your measurement...
15. Ster Hot/Cold Cartridge
- This item is used for Plumbing Fixtures, Tub and Shower Faucets and Accessories
- The item is manufactured in United States
- Brass 66" x 1" O.D. Shower Curtain Rod Satin Nickel
Features:
Specs:
Height | 4.75 Inches |
Length | 1.38 Inches |
Weight | 0.19 Pounds |
Width | 2.75 Inches |
Number of items | 1 |
🎓 Reddit experts on faucet stems
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where faucet stems are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
I second buying a Perlick. I bought a kegerator on CL and cleaned the hell out of it, but it still had a cheap faucet on it. It poured ok but everyday it got sticky and was hard to engage the first few times per day. Don't even waste your time trying to clean the original faucet. Just get a Perlick and be done with it. <$30: https://amzn.com/B0063G7DIM
Obviously replace ALL hoses (co2 and liquid) as well as clamps. That should be less than $10-12. I have a $10 fridge thermometer that works well, but it's not a necessity. Toss a baking soda fridge pack in there as well to handle any smells.
Good call! So something like this:?
EDIT: I can see there's lots of stem extension options online, I'm going to deep dive into this, looks like this shower stall faucet will work after all if I can rig up something.
EDIT 2: I am pretty sure I need 2 of these:
I can't justify the $70 on a $20 faucet. Can you buy these parts individually and save a ton?
https://www.amazon.com/Pfister-974-3750-Extension-Sleeve-Screw/dp/B005UNNFD6/ref=pd_sbs_60_5?_encoding=UTF8&pd_rd_i=B005UNNFD6&pd_rd_r=2174c86d-b443-11e8-a8ea-092258445276&pd_rd_w=QbQ6D&pd_rd_wg=mWZsW&pf_rd_i=desktop-dp-sims&pf_rd_m=ATVPDKIKX0DER&pf_rd_p=0bb14103-7f67-4c21-9b0b-31f42dc047e7&pf_rd_r=YXVGC355V7NNMT0PMP5Z&pf_rd_s=desktop-dp-sims&pf_rd_t=40701&psc=1&refRID=YXVGC355V7NNMT0PMP5Z#customerReviews
Any major difference between these faucets and these ones? It looks like the cheaper ones are 525's. Are they just as good at not sticking?
Ha, I know what you mean about the Aluminum tape. It just doesn't hold up as well as duct tape. I stuck with the aluminum, but covered it up with some gaffers tape.
I'm also considering switching to an outdoor faucet cover, particularly for shorter trips. It's much more voluminous but weighs <1 oz and is supposed to insulate much better.
Your pic looks a lot like my basement and we have a valve on the inside for the backyard faucet
We don't have an accessible valve for our front-yard faucet so we use a cover like this http://www.amazon.com/Frost-King-FC1-Outdoor-Faucet/dp/B001FG3C1C/
https://www.amazon.com/LASCO-0-4031-8-Inch-Sterling-Washerless/dp/B009XD3XM2
Lasco 0-4031
KISSLER 11-3269
are compatible stems that I have in my book
You'll have better luck searching with the Sterling # SRA-3269 (3270 for cold) instead of the Danco identifier since they discontinued it.
A3269/A-3269/SRA-3269
Looks like they have all brass as well.. but I don't know these websites. Just happened to come across them.
http://www.lockeplumbing.com/detail.asp?c=Faucet%20Parts%20S%20through%20T&amp;s=Sterling%20/%20Rockwell&amp;s2=&amp;sku=STE-A-3269&amp;r1=WHE-USS25C&amp;r2=GRU-595916&amp;r3=FEI-NL9-LED
https://homefixitparts.com/plumbing-1/faucet-repair-kits/plumbing-faucet-repair-kits-sterling-p2-50-499a.html
Possibly Kohler/Sterling OEM version is now all brass.
I spent some time in a mobile home where the plumbing is not well insulated. The pipes, especially the outdoor faucets, are susceptible to freezing unless additional measures are taken. We would cover the outdoor faucets with a foam cover for insulation, and use heat tape. The latter plugs into an electric outlet and has a thermostat to know when it needs to turn on to heat the pipe and keep it from freezing.
Those two items would provide decent protection at a reasonable price, but it wouldn't cost a ton to have a plumber replace the outside faucet with a length of pipe going into the basement where the shutoff valve would be more easily accessible. This is your permanent solution...
I shut off the water going to the outside hose bibs and cover them with one of those styrofoam covers. The screen in the front door is replaced with the glass insert and I make sure all of the windows are shut tight and locked. The winter equipment is swapped with the summer stuff in the shed, and that's about it.
Yeah, they sell foam domes that attach to your hose bib and insulate it against the cold.
https://www.amazon.com/Danco-18553B-3Z-13H-Grohe-Faucets/dp/B00JJXG1XY
They make it with out the top threads for an escutcheon also
I was thinking of something like this. Not sure it’s big enough, but it may work
http://www.homedepot.com/p/DANCO-10Z-3D-Stem-for-Union-Gopher-17110B/202066399
http://www.homedepot.com/p/DANCO-10Z-5D-Stem-for-Union-Gopher-9D0015418B/204321611
https://www.amazon.com/Danco-15363B-7E-1H-Union-Gopher/dp/B000DZHCUI
If it looks like any of these, there is an o-ring not normal packing.
Better off replacing them then trying to rebuild them. You'll spend more time trying to find the right size o-ring only to find it still leaks since it was close but not exactly to the manufactures specs.
If this is your pipe, you may want to wrap it up so the pipes don't burst.
http://www.amazon.com/Frost-King-FC1-Outdoor-Faucet/dp/B001FG3C1C/ref=sr_1_1?ie=UTF8&amp;qid=1416350603&amp;sr=8-1&amp;keywords=spicket+cover
https://www.amazon.com/BrassCraft-ST0849X-Pfister-Lavatory-Applications/dp/B004Q00S3E
Do you know if I can upgrade the handles I have to tap handles or are they threaded differently? Would I need an entirely different tower to put them on or can I just replace?
This is what I have
I wouldn't mind moving to these or something similar
Cartridge: Delta RP25513
Seats & Springs: Delta RP4993
valve packing
how to
Pfister 9103000 Roman Tub Compression Stem https://www.amazon.com/dp/B00D5Z166E/ref=cm_sw_r_cp_apa_i_dM-nDb1820JB8
[Yes, an insulated cap.](Frost King FC1 Outdoor Foam Faucet Cover, Oval 3 pack https://www.amazon.com/dp/B01251QDL6/ref=cm_sw_r_cp_apa_i_DJ-DCb97FHCTP)
He needs some of these bad boys
Here are some links to videos on how to turn off integral stops (even though the vids use single handle faucets) https://www.youtube.com/watch?v=jnPNR6douzg
https://www.youtube.com/watch?v=iQmXAdFVyOg.
Additional links are for sources of replacement stems (OEM name was "Aquaseal", though I doubt very highly many home center employees will recognize it): https://www.griggindustries.com/page651.html
https://www.homedepot.com/p/American-Standard-072950-1700-AquaSeal-Right-Hand-Stem-130420/205603847
https://www.amazon.com/American-Standard-072950-1700-Side-Stem/dp/B0087U4F2Y
Though it illustrates a 3-handle faucet, this page shows an exploded view of your valve: https://www.azpartsmaster.com/american-standard-heritage-tub-shower-valve-schematic.aspx
And finally, a how-to rebuild an American Standard Aquaseal page from a reputable plumbing site forum: https://www.plbg.com/forum/read.php?1,281732
Just clean it, spraypaint it, and cover it with one of these:
https://www.amazon.com/Frost-King-FC1-Outdoor-Faucet/dp/B001FG3C1C
They're cheap as hell from every hardware store and they'll keep the weather from screwing up the connection.
Thanks for the reply.
Sorry, but I'm not really following what you're saying. The faucet drips when I have the outside spigot closed, and the water valve on the inside of the house is open. Is the spring less check valve the valve seat for the end of the stem?
Regarding the filing, when I screwed the stem into the spigot, it didn't go in all the way and it felt like it didn't fit. I got the idea from other reviews on amazon where I ordered the valve stem. Not sure if I can link to amazon, but the reviews are here - https://www.amazon.com/Arrowhead-PK8004-Replacement-4-Inch-Hydrants/dp/B000PS8OE6/ref=cm_cr_arp_d_product_sims?ie=UTF8
I basically used a dremel and ground down the back edges of the square part of the stem bit by bit until it eventually screwed in. When I compared the new stem to the old stem, the old stem had a much smaller square.
This is what's on there now...it's my mother's house so I'm not sure if she kept the old one that I broke so I can't get an actual picture yet.. This is the one that I replaced one with when I was desperate at night with the stores closing.