(Part 2) Reddit mentions: The best flagpole hardware
We found 55 Reddit comments discussing the best flagpole hardware. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 36 products and ranked them based on the amount of positive reactions they received. Here are the products ranked 21-40. You can also go back to the previous section.
21. Boone Sports Fan Under da Tire Flag Pole Stand and Case
Flag pole bumper protects your vehicle's finish in winterDurable nylon carry case includedHelps keep flag pole base parts organizedPowder-coated steel constructionDimensions: 16L x 4W x 4H inches
Specs:
| Height | 4 Inches |
| Length | 16 Inches |
| Weight | 6 Pounds |
| Width | 6 Inches |
22. Flagpole Retainer Ring Beaded Silver/Gray Keep Flag Close to Pole USA Made (15)
- USAGE: Flag pole rings are used to secure the bottom of the flag as close to the flag pole as possible on the internal halyard system; these flag weights help to raise and lower the flag
- BENEFITS: Beaded retainer rings help reduce tension and motion on the flag grommets when windy; this will extend your flag's life; these flag retainer rings offer quick linking for securing flags
- HIGH-QUALITY DESIGN: Hand-dyed 1-inch nylon balls are strung onto stainless steel aircraft cable; 30" and larger also have stainless steel thimbles
- EASY TO USE: Easy to install by hand without any tools; complete with stainless steel hook quick links to secure the loops together; rings are sized loop to loop (50" is 50" from end to end)
- BRAND PROMISE: High-quality grommet rings handmade in the USA; we stand by our products; return in original condition for refund eligibility
Features:
Specs:
| Color | Silver |
| Length | 15 Inches |
23. Gettysburg Flag Works Brass Flagpole Joint, 1 1/4" Dia, for Indoor and Parade flagpoles Made in USA
Gold Colored Cast BrassIncludes set screwsIncludes male and female fittings to work with appropriate sized flagpoleServes as replacement part or for making your own pole
Specs:
| Color | GOLD |
| Size | 1.25" |
24. CO-Z 20' Flag Pole Telescoping Aluminum Kit 5-Section flagpole for 2 US flag
- ✔ This brand new telescopic ALUMINUM FLAGPOLE comes in 5 SECTIONS that are screwed together. Telescopic Flag Pole+Golden Ball Finial+PVC Sleeve+American National Flag +Hooks & Screws
- ✔ Three free rotating brackets DESIGNED TO PROHIBIT FLAG TANGLING TANGLED on windy days and allow TWO 3 x 5 feet flags to fly AT THE SAME TIME.
- ✔ The 20 feet CO-Z flag poles are made from HEAVY DUTY ALUMINUM that is LIGHT YET STRONG so you can mount them QUICKLY and ENJOY them for years to come. The mounting PVC sleeve allows the pole to stick into the ground and be stable.
- ✔ This quality BRUSHED ALUMINUM flagpole is TOUGH and GUARANTEED to LAST, specifically designed for ALL WEATHER outdoor use. There's no need to buy extra unfurling tubes or rings as the top of the pole rotates on ball bearings so your flag will NEVER TANGLE.
Features:
Specs:
| Size | 20' flag pole |
25. SeaSense Telescoping Flag Pole
Package length: 4.572 cmPackage width: 10.795 cmPackage height: 75.565 cmProduct Type: SPORTING GOODS
Specs:
| Height | 33 Inches |
| Length | 3 Inches |
| Weight | 0.5 Pounds |
| Width | 5 Inches |
| Release date | May 2008 |
| Number of items | 1 |
26. Electric Way Aluminum Flag Pole Bracket - For Use on Street Lights and Utility Poles
Used to Mount Flagpoles to Street Lights and Telephone Poles1" Diameter. Use Either Screws or Mounting Strap.Displays Pole at 45 Degree AngleUS MadeLow Cost Shipping Available!
Specs:
| Height | 2.5 Inches |
| Length | 6 Inches |
| Weight | 0.53 Pounds |
| Width | 2.75 Inches |
27. Online Stores Indoor Oak Flagpole, 8-Feet
Straight grained hardwoodsSolid brass screw joint8-Feet pole
Specs:
| Color | Brown and gold |
| Height | 2.75 Inches |
| Length | 51 Inches |
| Weight | 4 Pounds |
| Width | 4.25 Inches |
| Size | 8 feet |
| Number of items | 1 |
28. Brass Screw Joint Indoor Oak Flagpole Replacement 1 1/4" O.D. and 1 3/32" I.D.
Brass Flagpole Screw Joint For Wood PolesOutside Diameter: 1 1/4 InchBrass Screw Joint Inside Diameter: 1 3/32 InchScrew Joint Length Assembled: 6 InchesMade In The USA
Specs:
| Color | Brass |
| Weight | 0.5 Pounds |
29. Flagpole To Go FP-15 14.33 ft. 2 Flags Adjustable and Portable Flagpole - Aluminum
Dimensions: 1.25 diam. x 172H in.Bring to graduations, picnics, and campsitesPortable, adjustable, and super lightweightHolds flags up to 5W x 3H ft.Cam locks hold pole in place when extended
Specs:
| Height | 3 Inches |
| Length | 48 Inches |
| Weight | 2 Pounds |
| Width | 5 Inches |
30. LP LUXYPET CAT Pole (Transparent Hammock Type)
✔️This product is an full option image of Dan Cat Pole. material : pine tree, birch tree✔️Cat poles installed from the floor to the ceiling ..... safe? Knowing and properly installed, you can use strong and secure.✔️Cats love high places. for cat, Scratchers for Toenail Care
Specs:
| Height | 62.99212592 Inches |
| Length | 47.24409444 Inches |
| Weight | 30 Kilograms |
| Width | 15.74803148 Inches |
| Size | L120cm D40cm H160cm |
31. Valley Forge Flag 60753 Adjst Alum Flag Bracket, 0
DISPLAY YOUR AMERICAN PRIDE - Valley Forge Flag is committed to providing high-quality flags and accessories that exemplify our country’s national honor and spirit, raising its colors to express respect and pride for our American way of life. Use this multi-position flagpole bracket to mount your ...
Specs:
| Color | Gray |
| Height | 11 Inches |
| Length | 4 Inches |
| Weight | 0.65 Pounds |
| Width | 3 Inches |
| Size | 0 |
| Number of items | 1 |
32. Standard Tow Single Flag Holder (Made in the USA)
- Heavy Duty Construction
- Holds one flag pole
- Fits 1" Standard Flag Poles
- Easy Installation
- Thumbscrews poles flag securely in place
Features:
Specs:
| Color | Safety Silver |
| Height | 6 Inches |
| Length | 12 Inches |
| Weight | 3 Pounds |
| Width | 2 Inches |
33. 16x6 Inches Metal Steel Telescoping Tailgating Flagpole Vehicle Tire Stand w/ Cylinder Pole Holder for Home Outdoor Travel Party Mount Flag Car Truck Van RV Wheel
- #1 RATED, MOST RELIABLE, WORLDWIDE SELLER of RA BOCK DIAGNOSTICS PRODUCTS!
- Optical quality glass lens that is specially coated to help resist scratches
- Variable light intensity rheostat type switch that delivers an increasing light intensity through head attachments
- High-quality, German made, bright LED bulbs in all instrument heads
- Instrument handle utilizes a bayonet luer-locking mechanism for changing the multiple instrument heads included in the kit
Features:
Specs:
| Height | 15.63 Inches |
| Length | 16.75 Inches |
| Weight | 5.7 Pounds |
| Width | 6 Inches |
34. EasyGoProducts EGP-POLE-003 Tire Mount Pole Holder – Tailgate Flag Bracket-Wo
- STRONG AND DURABLE - Our tire mount flag holder is made of a powder coated steel with a matte black finish.
- STABLE AND STURDY - Two piece design flag holder bracket includes butterfly set screw to support flag position and hold flag into place.
- VERSATILE AND FUN - Fits flag pole up to 1.25” in diameter for this flag pole holder which can be an RV Flag Holder, a Car Flag Holder, Trailer Flag Mount or Tire Flag Mount.
- EASY SET-UP - Flag pole holder flat base measures 13.75” long x 5” wide with a pole sleeve measuring 8.75” tall.
- 100% SATISFACTION GUARANTEED – Ground flag holder works great for use at campsites, as a tailgate flag pole holder, or a flag holder for truck.
Features:
Specs:
| Height | 4.5 Inches |
| Length | 13.75 Inches |
| Width | 5.25 Inches |
| Number of items | 1 |
36. Jackite Green Fiberglass Pole 31 Foot for Bird Kite, Wind Sock
- Green, fiberglass pole extends to 31' long
- Easily holds your existing Jackite bird kite
- 10 separate sections telescope upward for plenty of versatility
- Collapses to 45.5" for easy transportation and storage
- Metal winder clips securely store your kite line
Features:
Specs:
| Color | Green |
| Size | 31'L |
🎓 Reddit experts on flagpole hardware
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where flagpole hardware are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Interested in what Redditors like? Check out our Shuffle feature
Shuffle: random products popular on RedditTop Reddit comments about Flagpole Hardware:
Summary
21. Boone Sports Fan Under da Tire Flag Pole Stand and Case
Flag pole bumper protects your vehicle's finish in winterDurable nylon carry case includedHelps keep flag pole base parts organizedPowder-coated steel constructionDimensions: 16L x 4W x 4H inches
Specs:
| Height | 4 Inches |
| Length | 16 Inches |
| Weight | 6 Pounds |
| Width | 6 Inches |
22. Flagpole Retainer Ring Beaded Silver/Gray Keep Flag Close to Pole USA Made (15)
- USAGE: Flag pole rings are used to secure the bottom of the flag as close to the flag pole as possible on the internal halyard system; these flag weights help to raise and lower the flag
- BENEFITS: Beaded retainer rings help reduce tension and motion on the flag grommets when windy; this will extend your flag's life; these flag retainer rings offer quick linking for securing flags
- HIGH-QUALITY DESIGN: Hand-dyed 1-inch nylon balls are strung onto stainless steel aircraft cable; 30" and larger also have stainless steel thimbles
- EASY TO USE: Easy to install by hand without any tools; complete with stainless steel hook quick links to secure the loops together; rings are sized loop to loop (50" is 50" from end to end)
- BRAND PROMISE: High-quality grommet rings handmade in the USA; we stand by our products; return in original condition for refund eligibility
Features:
Specs:
| Color | Silver |
| Length | 15 Inches |
23. Gettysburg Flag Works Brass Flagpole Joint, 1 1/4" Dia, for Indoor and Parade flagpoles Made in USA
Gold Colored Cast BrassIncludes set screwsIncludes male and female fittings to work with appropriate sized flagpoleServes as replacement part or for making your own pole
Specs:
| Color | GOLD |
| Size | 1.25" |
24. CO-Z 20' Flag Pole Telescoping Aluminum Kit 5-Section flagpole for 2 US flag
- ✔ This brand new telescopic ALUMINUM FLAGPOLE comes in 5 SECTIONS that are screwed together. Telescopic Flag Pole+Golden Ball Finial+PVC Sleeve+American National Flag +Hooks & Screws
- ✔ Three free rotating brackets DESIGNED TO PROHIBIT FLAG TANGLING TANGLED on windy days and allow TWO 3 x 5 feet flags to fly AT THE SAME TIME.
- ✔ The 20 feet CO-Z flag poles are made from HEAVY DUTY ALUMINUM that is LIGHT YET STRONG so you can mount them QUICKLY and ENJOY them for years to come. The mounting PVC sleeve allows the pole to stick into the ground and be stable.
- ✔ This quality BRUSHED ALUMINUM flagpole is TOUGH and GUARANTEED to LAST, specifically designed for ALL WEATHER outdoor use. There's no need to buy extra unfurling tubes or rings as the top of the pole rotates on ball bearings so your flag will NEVER TANGLE.
Features:
Specs:
| Size | 20' flag pole |
25. SeaSense Telescoping Flag Pole
Package length: 4.572 cmPackage width: 10.795 cmPackage height: 75.565 cmProduct Type: SPORTING GOODS
Specs:
| Height | 33 Inches |
| Length | 3 Inches |
| Weight | 0.5 Pounds |
| Width | 5 Inches |
| Release date | May 2008 |
| Number of items | 1 |
26. Electric Way Aluminum Flag Pole Bracket - For Use on Street Lights and Utility Poles
Used to Mount Flagpoles to Street Lights and Telephone Poles1" Diameter. Use Either Screws or Mounting Strap.Displays Pole at 45 Degree AngleUS MadeLow Cost Shipping Available!
Specs:
| Height | 2.5 Inches |
| Length | 6 Inches |
| Weight | 0.53 Pounds |
| Width | 2.75 Inches |
27. Online Stores Indoor Oak Flagpole, 8-Feet
Straight grained hardwoodsSolid brass screw joint8-Feet pole
Specs:
| Color | Brown and gold |
| Height | 2.75 Inches |
| Length | 51 Inches |
| Weight | 4 Pounds |
| Width | 4.25 Inches |
| Size | 8 feet |
| Number of items | 1 |
28. Brass Screw Joint Indoor Oak Flagpole Replacement 1 1/4" O.D. and 1 3/32" I.D.
Brass Flagpole Screw Joint For Wood PolesOutside Diameter: 1 1/4 InchBrass Screw Joint Inside Diameter: 1 3/32 InchScrew Joint Length Assembled: 6 InchesMade In The USA
Specs:
| Color | Brass |
| Weight | 0.5 Pounds |
29. Flagpole To Go FP-15 14.33 ft. 2 Flags Adjustable and Portable Flagpole - Aluminum
Dimensions: 1.25 diam. x 172H in.Bring to graduations, picnics, and campsitesPortable, adjustable, and super lightweightHolds flags up to 5W x 3H ft.Cam locks hold pole in place when extended
Specs:
| Height | 3 Inches |
| Length | 48 Inches |
| Weight | 2 Pounds |
| Width | 5 Inches |
30. LP LUXYPET CAT Pole (Transparent Hammock Type)
✔️This product is an full option image of Dan Cat Pole. material : pine tree, birch tree✔️Cat poles installed from the floor to the ceiling ..... safe? Knowing and properly installed, you can use strong and secure.✔️Cats love high places. for cat, Scratchers for Toenail Care
Specs:
| Height | 62.99212592 Inches |
| Length | 47.24409444 Inches |
| Weight | 30 Kilograms |
| Width | 15.74803148 Inches |
| Size | L120cm D40cm H160cm |
31. Valley Forge Flag 60753 Adjst Alum Flag Bracket, 0
DISPLAY YOUR AMERICAN PRIDE - Valley Forge Flag is committed to providing high-quality flags and accessories that exemplify our country’s national honor and spirit, raising its colors to express respect and pride for our American way of life. Use this multi-position flagpole bracket to mount your ...
Specs:
| Color | Gray |
| Height | 11 Inches |
| Length | 4 Inches |
| Weight | 0.65 Pounds |
| Width | 3 Inches |
| Size | 0 |
| Number of items | 1 |
32. Standard Tow Single Flag Holder (Made in the USA)
- Heavy Duty Construction
- Holds one flag pole
- Fits 1" Standard Flag Poles
- Easy Installation
- Thumbscrews poles flag securely in place
Features:
Specs:
| Color | Safety Silver |
| Height | 6 Inches |
| Length | 12 Inches |
| Weight | 3 Pounds |
| Width | 2 Inches |
33. 16x6 Inches Metal Steel Telescoping Tailgating Flagpole Vehicle Tire Stand w/ Cylinder Pole Holder for Home Outdoor Travel Party Mount Flag Car Truck Van RV Wheel
- #1 RATED, MOST RELIABLE, WORLDWIDE SELLER of RA BOCK DIAGNOSTICS PRODUCTS!
- Optical quality glass lens that is specially coated to help resist scratches
- Variable light intensity rheostat type switch that delivers an increasing light intensity through head attachments
- High-quality, German made, bright LED bulbs in all instrument heads
- Instrument handle utilizes a bayonet luer-locking mechanism for changing the multiple instrument heads included in the kit
Features:
Specs:
| Height | 15.63 Inches |
| Length | 16.75 Inches |
| Weight | 5.7 Pounds |
| Width | 6 Inches |
34. EasyGoProducts EGP-POLE-003 Tire Mount Pole Holder – Tailgate Flag Bracket-Wo
- STRONG AND DURABLE - Our tire mount flag holder is made of a powder coated steel with a matte black finish.
- STABLE AND STURDY - Two piece design flag holder bracket includes butterfly set screw to support flag position and hold flag into place.
- VERSATILE AND FUN - Fits flag pole up to 1.25” in diameter for this flag pole holder which can be an RV Flag Holder, a Car Flag Holder, Trailer Flag Mount or Tire Flag Mount.
- EASY SET-UP - Flag pole holder flat base measures 13.75” long x 5” wide with a pole sleeve measuring 8.75” tall.
- 100% SATISFACTION GUARANTEED – Ground flag holder works great for use at campsites, as a tailgate flag pole holder, or a flag holder for truck.
Features:
Specs:
| Height | 4.5 Inches |
| Length | 13.75 Inches |
| Width | 5.25 Inches |
| Number of items | 1 |
36. Jackite Green Fiberglass Pole 31 Foot for Bird Kite, Wind Sock
- Green, fiberglass pole extends to 31' long
- Easily holds your existing Jackite bird kite
- 10 separate sections telescope upward for plenty of versatility
- Collapses to 45.5" for easy transportation and storage
- Metal winder clips securely store your kite line
Features:
Specs:
| Color | Green |
| Size | 31'L |
Just a flagpole from amazon.
http://www.amazon.com/Boone-Sports-Under-Tire-Stand/dp/B00DNH8RFM
https://www.amazon.com/Online-Stores-Indoor-Flagpole-8-Feet/dp/B0013NXQTA
They make lamp post kits with smaller flags. https://www.amazon.com/dp/B0014DNSQU/ref=cm_sw_r_awd_.O0jub12CZYGR
SeaSense Telescopic Flag Pole https://www.amazon.com/dp/B0019M5EWW/ref=cm_sw_r_cp_api_FdwBxbF8PADCH
https://www.amazon.com/Flagpole-Retainer-Beaded-Silver-Close/dp/B07H2RCW7P/
Or just use these
Again, overthinking it. Patriot Lodge used a couple of large rolling suitcases.
BlackFriday Promotion: Enter code"FA8ST98J", only $49.79 to get: CO-Z 20ft Telescoping Aluminum Flag Poles with US Flag (Friday to Sunday)
-http://www.amazon.com/Camco-51611-Hitch-Flagpole-Holder/dp/B004IVGA0G
-http://www.amazon.com/Standard-Hitch-Flag-Holder-Made/dp/B00KXDFGMQ/ref=sr_1_2?s=automotive&ie=UTF8&qid=1404638839&sr=1-2&keywords=flagpole+hitch
One's angled the other's not, i prefer the angled but up to you.
How about a flagpole screw joint? Could make it look intentional.
Get 4 x portable, telescoping flag poles (like this) and bases. The cross-members don't have to be rigid, so string caution tape between the the poles. Boom, cheap portable air tower.
I found this but not sure if it ships to Canada
The mount is just a regular mount that is meant to be hung off of houses. I mounted that at the bottom of my bed, and then toward the top I actually used a door handle (lol), intentionally not big enough to go around the pole, I drilled it around the pole so it kind of bent around it, securing it.
For the pole, it is just a black steel pole, 3/4", 5 foot tall. I got all of those at my hardware store.
It sits just fine, I've had at 100 mph and it sure as hell wasn't going anywhere.
I can't get to my truck right now, the transmission blew just yesterday unfortunately, but I drew this picture to kind of show how it looked.
I've been using a 1/4 wave vertical for beach trips with a 31 foot kit flag pole, a drive-over mount, and 30 feet of wire + 3 radials at 25 feet 120 degrees apart. Fed with coax with a homebrew direct feed box.
Decent for RX down to 80 meters and no need for a tree providing you have a vehicle to sit on the mount or something heavy to hold it down (like a sandbag or bricks)
Wire is THHN stranded from Lowes
Pole: https://www.amazon.com/gp/product/B002YPS9HU/
Mount: https://www.amazon.com/gp/product/B00G2KMRZ8/
I bought one of these a while back and no issues with it.
I made and use an EARCHI end-fed with a tuner suspended on a 31' telescopic fiberglass pole.
How tall is your flagpole? What is circumference at base. That all sounded dirty! We have used this in the past.....https://www.amazon.com/Tire-Mount-Flag-Holder-Tailgate/dp/B01MQMLRN2/ref=sr_1_2?ie=UTF8&qid=1496097524&sr=8-2&keywords=tire+flag+pole+holder
I'd suggest getting the 9ft or 12ft one here.
At the end of the day you're going to be risking it if you go higher than that. Will the have tape measures? No, probably not, but they'll use the height of the entry-way to determine length.
It all depends on the security guard you get and how much of an ass they plan to be. I've been FINE with a 14ft but have also had it taken away in the past too, mixed experiences all around.