Reddit mentions: The best gun jags
We found 5 Reddit comments discussing the best gun jags. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 3 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Hoppe's No. 9, 13-Piece Brass Jag Kit
- Compatible rods
- Cleaning rod System and other
- Clean a multitude of weapons
- Muzzle for the deepest clean
- Use to push patches
- A cleaning jag is an effective means of cleaning a barrel
- Provides even contact on all sides of the bore.
- Holds the patch securely.
- Includes .17, .22, .270, .30, .33, .375, .40, .44, .45, and .50 caliber brass jags
Features:
Specs:
Color | Orange |
Release date | March 2011 |
Size | One Size |
Weight | 0.24 Pounds |
2. GUNSLICK Brass Benchrest Handgun Jag (.38/357/9mm Caliber)
- Made of the highest quality materials
- Hunting gun Cleaning supplies
- Another quality Bushnell product
- Benchrest quality
- Accurately clean
- Available in multiple calibers and gauges
- 8-32 threads
Features:
Specs:
Height | 1.6 Inches |
Length | 3.5 Inches |
Number of items | 1 |
Release date | February 2011 |
Size | .38/.357/9mm |
Width | 2.8 Inches |
3. GUNSLICK Brass Benchrest Handgun Jag (10mm/40 Caliber)
Hunting gun Cleaning suppliesBenchrest qualityAccurately cleanAvailable in multiple calibers and gauges8-32 threads
Specs:
Height | 7 Inches |
Length | 7 Inches |
Number of items | 1 |
Release date | February 2011 |
Size | 10mm/.40 |
Width | 7 Inches |
🎓 Reddit experts on gun jags
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where gun jags are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
I have bought kits and I have bought individual bits. The individual bits are the best deal as you can get what you need.
So I am a big fan of FrogLube CLP for its lubricating and Protecting capabilities. base one This test You can read that over and figure out what you like from there as well.
For barrel Cleaning. Kroil is a good penetrating oil for getting under carbon and lead and helping to lift them off.
Hoppe #9 bore cleaner is a classic and seems to work well for getting copper out. Usually alternate between the Kroil and Hoppes to get both the copper and carbon fouling removed.
I also use a mix of Bore Brushes and Jags
This may be controversial but I prefer stainless steel cleaning rod to the plastic coated or aluminum rods. I believe they are less likely to damage the barrel.
Other than that there are lots of options with big debates over the best way of cleaning your gun and the best stuff to use. Good luck
Ballistol is great, here is what I use:
I use them pretty much in that order. If I could buy only 1 thing from the list, it would be the nitrile gloves. All the gun cleaning solvents are super toxic, nitrile is better than latex for solvents. Latex won't stop some solvents. Ballistol is the second best thing, then Gunslick Ultra Klenz is my next favorite. The Outer's Crud Crutter removes all of the above solvents, I use it when I'm done cleaning with Ultra Klenz and CR-10 because it removes the solvents and dries leaving the gun bone dry. Then I apply a drop of grease at friction points and give it an all over polishing with Ballistol.
I use this rod https://www.amazon.com/Gunslick-Handgun-Carbon-Fiber-Cleaning/dp/B001NOVF92
and just some generic bronze brushes like this https://www.amazon.com/Gunslick-Bore-Cleaning-Brush/dp/B004NJC1ME/ref=pd_lpo_200_lp_tr_t_3?_encoding=UTF8&refRID=2PA7VYF9QHZ5KMSS97E3&th=1&psc=1
and use this to send a few pieces of cloth through until they come out clean https://www.amazon.com/Gunslick-Brass-Benchrest-Handgun-Caliber/dp/B004NJDG14/ref=pd_sim_200_4?_encoding=UTF8&pd_rd_i=B004NJDG14&pd_rd_r=9TTKD0XDXN2KSBS2TNRK&pd_rd_w=K2pUv&pd_rd_wg=CIoxr&psc=1&refRID=9TTKD0XDXN2KSBS2TNRK
Basically I just clean the bore after 1000 or so rounds and use a toothpick/cloth to clean the slide channels and lightly oil them. I use M7Pro cleaning stuff and oil just because I can find it at most stores around here and it doesn't smell or irritate my skin. There really is no sense in pulling the trigger and all that stuff out unless it starts sticking or you have run 5k or 10k rounds through it.
Just to cover everything these are the cloth pieces i use too https://www.amazon.com/Professionals-Choice-Cleaning-800-Pack-357-Calibre/dp/B00KJLTONO/ref=sr_1_5?s=sporting-goods&ie=UTF8&qid=1484333214&sr=1-5&keywords=gun+cleaning+patches
Use this every time you go to the range, use it frequently
Every once in long while, several hundred rounds, go through and do a deep clean to remove copper and whatnot:
That's it for me.
Generation 4, New:
What It Comes With
Cleaning Products
Accessories
Home Defense, Some Suggestions