Reddit mentions: The best hood scoops & vents
We found 28 Reddit comments discussing the best hood scoops & vents. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 16 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Aerocatch 120-2100 Above Panel Flush Locking Hood Latch and Pin Kit - Black
- 2 black above panel AeroCatch locking fasteners with 2 Nut Fixing Plates, 2 Red Aluminum Strike Pins and 2 Rubber Bump Stops
- Lightweight, high strength with a simple instillation
- Contains a hinged, spring-loaded stainless steel pin ensuring a secure fit
- Corrosion resistant and UV stable
- Compact, aerodynamic assemblies are the perfect modern replacements for conventional hood pins, door latches, and more
Features:
Specs:
Height | 6 Inches |
Length | 12 Inches |
Width | 6 Inches |
2. Aerocatch Xtreme Plus Flush Hood Latch and Pin Kit - Black (Above Panel Xtreme Locking, Without Installation Kit)
Flush Mount Hood Pin Set with Lever LockThermal Plastic Body with Aluminum PinsLocking designHood Pins, 120 Series, Plus Flush Mount, Black Plastic Body, Steel Pins, 4.961 in. Length, Kit, Locking
Specs:
Color | Without Installation Kit |
Height | 6 Inches |
Length | 6 Inches |
Number of items | 1 |
Size | Above Panel Xtreme Locking |
Width | 2 Inches |
3. Aluminum Hood Catch Set
- ADJUSTABLE TENSION ROD: The durable, & aesthetically pleasing aluminum hood catches are proportional to the vehicle and offer a direct fit, reducing hood flutter. Includes installation hardware.
- ALUMINUM HOOD CATCH KIT: The bolt on hood latch is easy to install. Fully adjustable hood catch was built as a stronger direct replacement for the OE catches that degrade and fail after years of use.
- UPGRADED LATCHES: The rustproof, enhanced and rugged offroad inspired design, keep your hood staying in place even over the roughest terrain with a variety heavy duty hood catches.
- RUGGED RIDGE JEEP PARTS: Count on Rugged Ridge to provide you with proven Jeep parts & accessories like bumpers, lift kits, wheels, interior accessories, floor liners & more for varying Jeep models
- FIVE YEAR WARRANTY: Our Rugged Ridge products are covered by industry leading 5 year warranty & Rugged Ridge Floor Liners have Limited Lifetime Warranties providing customers with repair or replacements subject to certain common exclusions.
Features:
Specs:
Color | Gloss Black |
Height | 3 Inches |
Length | 10 Inches |
Number of items | 1 |
Weight | 0.14 Pounds |
Width | 8 Inches |
4. Aerocatch 120-2000 Above Panel Flush Hood Latch and Pin Kit - Black
2 AeroCatch (Black) with 2 Nut Fixing Plates2 Red Aluminium Strikes and 2 Rubber Bump Stops1 AeroCatch Fastener Kit, 1 AeroCatch Arrow Sticker Set1 AeroCatch Cardboard Template
Specs:
Color | Without Installation Kit |
Height | 0 Inches |
Length | 0 Inches |
Number of items | 1 |
Size | Above Panel |
Width | 0 Inches |
5. Daystar, Jeep JK Wrangler Hood Wrangler, stop hood flutter and keep your hood securely shut, Red, fits 2007 to 2017 2/4WD, KJ09145RE, Made in America
- Package Dimensions: 21.336 H x 4.826 L x 7.366 W (centimetres)
- Country of Origin : United States
- Eliminates Hood Flutter and Shake When the Vehicle is at Speed
- Package Weight: 0.158 kilograms
Features:
Specs:
Color | Pink & Black |
Height | 7 Inches |
Length | 3 Inches |
Number of items | 1 |
Release date | August 2016 |
Width | 3.5 Inches |
6. Allstar Performance ALL18512 Steel Hood Pin Kit with 3/16" Flip-Over Clip
- Package Dimensions: 17.5 H x 1.7 L x 10.2 W (centimetres)
- Package Weight: 0.261 kilograms
- Fit type: Vehicle Specific
- Country of Origin : United States
Features:
Specs:
Height | 12 Inches |
Length | 84 Inches |
Number of items | 2 |
Size | 3/16" Clips |
Weight | 0.28 Pounds |
Width | 48 Inches |
7. Hood Lock For Jeep Wrangler Mopar Part #82213051
- OE Factory Part
- Factory Warranty
Features:
Specs:
Height | 8 Inches |
Length | 8 Inches |
Weight | 3 Pounds |
Width | 5 Inches |
8. Spectre Performance 42563 Chrome Hood Pin Kit
- Designed for universal compatibility
- Intended for use in conjunction with OE hood latch
- Mounting hardware included
- Manufactured from high quality materials
- Scuff plates and hair pin clips feature stainless steel construction
- Bolts and pins feature triple chrome plated construction
Features:
Specs:
Height | 0.3 Inches |
Length | 6 Inches |
Number of items | 1 |
Release date | December 2013 |
Weight | 0.1 Pounds |
Width | 4 Inches |
9. 2008-2011 DODGE CHALLENGER CHROME HOOD PIN KIT MOPAR
Meets thatcham requirements hood pin kitMopar logoStainless SteelSet of two
Specs:
Color | Chrome Plated Escushions |
Height | 6 Inches |
Length | 12 Inches |
Number of items | 1 |
Width | 11 Inches |
10. RT-TCZ Black Stainless Steel Latch Locking Hood Catch Kit For 2007-2018 Jeep Wrangler JK JKU
★ WIDE APPLICATION - RT-TCZ for Jeep Wrangler JK hood lock latch is fit for 2007 - 2018 Jeep Wrangler JK 2 Door & Unlimited 4 Door ( Sports, Sahara, Freedom & Rubicon )★ UNIQUE SHAPE AND APPEARANCE - RT-TCZ for Jeep Wrangler JK hood lock Latches will give your car a more cool look and sporty sty...
Specs:
Color | Black |
Height | 50 Centimeters |
Length | 100 Centimeters |
Weight | 100 Kilograms |
Width | 100 Centimeters |
11. iPerfect [Upgrade Version] Black Aluminum Hood Lock Assembly locking Hood Catch Latches for 2007-2015 Jeep Wrangler JK & Unlimited
- Fits for 2007-2015 Jeep Wrangler JK & Wrangler Unlimited & Other Models(SE/SPORT/X/RUBICON SARAHA) ONLY
- 100% Brand New
- Installs easily without drilling
- Made from die cast e-coated stainless steel featuring a black powder coat finish,enhance a rugged Offroad inspiring styling,keep your hood stay in place even over demanding terrain
- Tools required : 13mm deep socket(1/4'' drive) 10mm socker socket wrench as required 4mm allen wrench 6
Features:
Specs:
Color | Black |
Size | Hood Catch Latches |
12. Drake Off Road (JP-190001-LK Jeep JK Locking Hood Hold Down
Adjustable Turnbuckle Center Piece with Heim Joints at Either EndReinforced Body Mounts for Extra Strength and DurabilitySecurely Locks with Stainless Steel Locking PinsUV Resistant PVC Coated Stainless Steel Cables
Specs:
Height | 1.5 Inches |
Length | 12.6 Inches |
Number of items | 1 |
Release date | October 2014 |
Weight | 1.25 Pounds |
Width | 7.3 Inches |
13. Lisle 45900 Hood Prop
Works on All Makes of Cars and TrucksThe three-piece, telescoping design allows the mechanic to hold the hood in the desired positionThe tool telescopes from 18 1/2" to 46 3/4"Can be used from the side of car for better access to the engine compartmentAlso great for body or repair work on door, trun...
Specs:
Color | Factory |
Height | 1.75 inches |
Length | 21 inches |
Number of items | 1 |
Size | One Size |
Weight | 1.3 Pounds |
Width | 3.75 inches |
14. Daystar, Jeep JK Wrangler Hood Wrangler, stop hood flutter and keep your hood securely shut, black, fits 2007 to 2017 2/4WD, KJ09145BK, Made in America,Black
- Hood latch upgrade for the jeep wrangler
- Eliminates hood flutter and shake when the vehicle is at speed
- Replaces the weak rubber in the factory hood latch
Features:
Specs:
Color | Black |
Height | 2 Inches |
Length | 9.25 Inches |
Number of items | 1 |
Weight | 0.1 Pounds |
Width | 3 Inches |
15. RT-TCZ Stainless Steel Hood Latches Hood Lock Catch Latches Kit for Jeep Wrangler JK JL 2007-2021 Unlimited (Black)
- Custom Designed to fit for Jeep Wrangler JK JL 2007-2021 Unlimited
- Upgrade your factory hood catches with the Black catches.
- Made from die cast metal featuring a black powder coat finish.
- Keep your hood stay in place even over demanding terrain
- Direct replacement. No drilling required. Instruction is not included
Features:
Specs:
Color | Black |
Height | 50 Centimeters |
Length | 100 Centimeters |
Size | Type B |
Weight | 100 Kilograms |
Width | 100 Centimeters |
16. Aumo-mate 2pcs,Chrome Silver Exterior Decorative,Universal Hood Air Intake,Vent Air Flow Grille
100% Brand NewUniversal Car Exterior Decal for door, side fender, bonnet etc.No Tools or Drilling required (Clean the car surface before apply)Material: ABS Plastic(metal design)Size: 14.5 x 1.4 inch Weight: 3.2oz
🎓 Reddit experts on hood scoops & vents
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where hood scoops & vents are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Any time. Since you said it's a pos tuck I can recommend These as they are foolproof and work great. If you do care about looks though I run these locking aerocatches and they also work great, just a lot more expensive.
Interesting! I hope it works out for you. I solved the JK hood flutter issue by getting the stronger Daystar rubber bands, like these: https://smile.amazon.com/gp/product/B019QJI2QY/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Mine did the same thing. Bought these hood pins and absolutely love them. They also look badass. Angled mine a bit for max effect.
These are the ones I got. You can find ones that are wayy cheaper than this, but I read good reviews, so I went with these.
People also call them racing pins. Basically you cut holes in your hood, and screw these in. Then you use the metal piece and screw it to the frame somewhere in your engine bay so that it lines up with the plastic clips. You can get ones that lock with a key, or just the clips.
Here is how my car looks with them. Sorry, old picture, but you can sorta get the idea. I'm sure there's some better pictures if you google it.
Here's a good product, they make them for TJ and JK: https://www.amazon.com/Daystar-Wrangler-flutter-securely-KJ09145BK/dp/B001GH5ORK/ref=sr_1_3?ie=UTF8&qid=1504997695&sr=8-3&keywords=hood+wrangler
Yeah my hood latch still works. You would have to go into my car and unlock the hood latch. they also sell them with a lock, but it seemed unlock necessary for me lol.
Hood pins. The inside latch and cable mechanism is terrible. A good set of hood pins is what I tell all my XJ friends. Worth every penny, and they only cost about $15.
https://www.amazon.com/dp/B003BZQ9DI/ref=cm_sw_r_tw_dp_U_x_PnlkDb4A4B8FJ
Oh the plug at the top of the grill is a Mopar hood lock. It programs to match the ignition. It's one of the first things I added. Hope to keep my parts, my parts.
http://www.amazon.com/gp/product/B007NQ7LSI/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
Chrome plated hood pins for $8.70 on Amazon, just like on my old Nova SS.
https://www.amazon.com/Spectre-Performance-42563-Chrome-Hood/dp/B000BQ083C
https://www.amazon.com/Rugged-Ridge-11210-11-Black-Aluminum/dp/B00EDWF1BE/ref=sr_1_4?ie=UTF8&qid=1505443693&sr=8-4&keywords=jk+hood+latch
I got mine 3 years ago, for like half this much, so amazon might be overpriced atm, but even at $100 they are worth every penny.
https://www.amazon.com/AeroCatch-Plus-Flush-Locking-Latch/dp/B006F441SW
I got these ones (or similar). I did have someone else install them though haha, that was out of my skill range
Ordering my Mopar pins from amazon through Steve White Motors.
2008-2011 DODGE CHALLENGER CHROME HOOD PIN KIT MOPAR
https://www.amazon.com/dp/B005LGXYQ0/ref=cm_sw_r_cp_tai_.MejDbBE6KP6Y
RT-TCZ Black Stainless Steel Latch Locking Hood Catch Kit For 2007-2018 Jeep Wrangler JK JKU https://www.amazon.com/dp/B07CVWD4YB/ref=cm_sw_r_cp_apa_i_63FxDb7YW3406
This is the link:
iPerfect [Upgrade Version] Black Aluminum Hood Lock Assembly locking Hood Catch Latches for 2007-2015 Jeep Wrangler JK & Unlimited https://www.amazon.com/dp/B018RYEQYQ/ref=cm_sw_r_other_apa_M-Llxb9MDHFZD
They look like the rugged ridge ones to me. The set on Amazon have the silver hardware.
I have always been a fan of the Drake ones.
https://www.amazon.com/dp/B00OCJXQLU/ref=cm_sw_r_other_awd_Fqy8wbWWESV06
https://www.amazon.com/Lisle-45900-Hood-Prop/dp/B0002BC0T6
If you want junk, theres cheaper, but i used to build prototype vehicles, & these are very nice prop rods. They hold alot of weight without jamming & have anti slip bumpers on the end so they dont scratch paint. They also telescope to be very long & dont take up much room when not in use.
https://www.amazon.com/RT-TCZ-Stainless-Wrangler-2007-2018-Unlimited/dp/B07CVW9HCS?ref_=fsclp_pl_dp_10
I bought these to eliminate the hood from bouncing, but they lock up tight. Just don't lose the keys or you'll be buying another set.
If you want to do some slight hood modifications you can install some lockable hood pins. This is a more expensive kit, but you get the idea....
Locking hood pins
Another.
Here ya go.
https://smile.amazon.com/gp/product/B001GH5ORK/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
I used these here! https://www.amazon.com/gp/product/B00W30U2QM/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1
redneck fix
That's insane! Must have scared the shit out of you.
I just put these on my car and they completely got rid of the flutter:
https://www.amazon.com/gp/product/B019QJI2QY/ref=oh_aui_detailpage_o08_s02?ie=UTF8&psc=1
Buy some Daystar brand replacements to get rid of the hood flutter. They're cheap, and replace the rubber portion with poly for longevity.
It's a repair kit, it's not like buying completely new latches, just the worn out middle pieces
https://www.amazon.com/Daystar-Wrangler-flutter-securely-KJ09145BK/dp/B001GH5ORK?ref_=fsclp_pl_dp_2