#1 in Indoor fountains & accessories
Use arrows to jump to the previous/next product
Reddit mentions of AGPTEK Aluminum Mist Maker Fog Maker for Water Fountain Pond Rockery Fishtank Vase Birdbath
Sentiment score: 9
Reddit mentions: 16
We found 16 Reddit mentions of AGPTEK Aluminum Mist Maker Fog Maker for Water Fountain Pond Rockery Fishtank Vase Birdbath. Here are the top ones.
Buying options
View on Amazon.comor
- ♦ WIDELY USE - AGPtEK fogger machine indoor HS0056 can add a great amount of mist to your pond or water tank to filter the bad smell with ultrasonic technology. You can put the fountain atomizer in your pond, rockery, fish tank, vase, tank, etc. It will create a magical atmosphere. Especially perfect for Halloween and other holidays.
- ♦ WATERPROOF - The ultrasonic foger is waterproof and the length of the power adapter cable is long enough. Ideal for indoor or outdoor fountains, water feature, and office use.
- ♦ ENVIRONMENTAL PROTETION - Our plant humidity fogger can provide large amount of mist. Aerosolized amount≥400mL/H.No heat or chemicals used.
- ◆ EASY TO OPERATE - No heat or chemicals should be used in this led fog machine. This fog machine for fountains is easy to operate, put this water mister in the water and then the mist will appear.
- ♦ SAFE TO USE - The voltage of AGPtEK mist makers is 24V, so it's safe to use.
Features:
Specs:
Color | Aluminum(No lights) |
Weight | 0.330625 Pounds |
You can get submerged ultrasonic foggers like these or humidifiers with a tube attached
Source: My fucking vivarium
If you have enough room in your box, put a large plastic cup in the middle and put a small ultrasonic fog machine in it. Put that fogger on a timer to run about 20 seconds every couple hours or whatever. While you're at it, hook a small fan up to run around the same time to pull in some fresh air. An arduino nano is perfect for this.
I was where you were about 2 years ago.
​
You can find little water-based foggers for a few bucks in many places.
https://www.amazon.com/AGPTEK-Aluminum-Fountain-Fishtank-Birdbath/dp/B00PAK245E/
That's just a simple Amazon search for "water mist". You put them in a little pot of water and plug them in and they use high-frequency sonic pulses to make fog. They aren't anywhere as efficient as "Halloween fog maker" type things but they do the job for small jobs.
edit: I have a little USB one my daughter bought me because she knows I like cute little gadgets. Perhaps I will try to get it set up and take a few photos this weekend. Don't hold me to it....
Want to start by saying I'm definitely no shroom-growing genius yet. This is just my current setup, and a bleg for comments/ideas.
I'm just growing for myself. My brother died 1.5 years ago, and I've subsequently started microdosing shrooms, which turns out to be an absolutely fantastic antidepressant. So I'm more interested in "cheap, consistent, and reliable" than I am trying to churn out a kilo a week.
My setup is:
According to the Raspberry Pi, the average temperature in the room is 62 F, with a bimodal distribution (my girlfriend loves AC...). It's 65 F when I'm here alone, and 60 F whenever she's here. Humidity varies between 65% and 75%, though I'm still working on it. It's rather hard to boost temperatures in that particular basement room.
The shrooms are growing very slowly. They started pinning 3-ish weeks ago, and still don't look anything like the giant mushrooms I see posted here regularly. My "biggest yielding" tub currently looks like this. No giant shrooms, and rather sparse inside. Furthermore, a large percentage of the shrooms have been there long enough that the caps have turned black. The other tub has a few tiny pins but no growth yet.
So what do I need to be doing differently in order to improve my growth/yield? And are those black cap shrooms still good? Any comments would be greatly appreciated.
Things I've already learned this round:
> unflavored oil
Literally vegetable glycerin. I'd maybe get from a vape place though... not sure how pure your average kind is and whether it'd smell bad. Check nudenicotine.com for cheap definitely-vapable VG. Get 100% VG zero mg/ml nicotine.
As for vaping hardware... it's literally just a spool of wire wrapped around cotton soaking it up with power. But this might not be something you want to build yourself because something shitty has the real risk of blowing up the battery if you just leave it on. You could get a super cheap vape or something, and have it stay on? They're not really meant for that though. Or maybe something like this which is meant to stay on, then just leave VG in it.
Though dry ice might be the easiest set up of all. Depends if you want to be able to turn it on and off I guess.
Pump? It's 2017 sir. I'm fogging these ladies. 2 of these in each 24 quart container with ro water at 6.0ph. Nothing else. First roots pop in 5 days, ready for coir in 8 to 10 days. https://www.amazon.com/gp/aw/d/B00PAK245E/ref=yo_ii_img?ie=UTF8&psc=1
I'm not sure if this is available in Australia but this is the combo I have for my cheese fridge https://www.amazon.com/gp/product/B01N56KEU6/
I have the humidistat hooked up to https://www.amazon.com/gp/product/B00PAK245E/ inside a 1 gallon self-filling dog bowl with a usb fan blowing on it. I couldn't get a regular humidifier to keep up with the fridge, but this setup will keep 85% RH even when the fridge is running
They are kind of the same product but on a different scale. The reptifogger is essentially a large ultrasonic humidifier that will produce mist and greatly increase the humidity in your tank. The mist king system is a diaphragm pump that pushes water out of high pressure mister that creates more of a rain effect.
A small ultrasonic mister could be purchased instead and set just under the surface of the water in your tank to create the aesthetic fog you are looking for and save you a decent chunk of change. This is what I am going to use in mine to make fog on the water
I'm using a small transducer that I grabbed off amazon for about 10 bucks.
(Link: https://www.amazon.com/dp/B00PAK245E/ref=cm_sw_r_tw_dp_U_x_9kNBDb744V3MM )
It works by atomizing water, so the fog effect is just a very fine mist. It's fine enough that for short runs there's hardly any residue, but running it for a while leaves the tiles slightly damp.
Which foggers did you buy? I got this one, and even with an air pump it has a really hard time filling up a 5 gallon bucket.
Also, what nutrient solution are you using?
Not all humidifiers produce a mist. What you want is an ultrasonic atomizer.
I'd love to describe it! Generally I use the same design as I've found it works best for what I've grown in the past (cannabis, tomato, basil, peas, bell pepper, lettuce) which is an adaptation of most "aero-bucket" designs. For mine it's very simple, food grade bucket (preferably black to limit algal growth, though I've never had issues with this before) and an inexpensive pond fogger. The pond fogger works awesome at vaporizing the water and I've found nutrient penetration to the roots is much more effective than a direct spray method. The fogger can be a little finnicky given it needs a semi exact water level to work well but if your bucket is sealed (food grade buckets use a great gasket for sealing) you'll be fine as the solution vapor will remain in the bucket with minimal losses. Ive also used a plastic pot upside-down to raise the fogger and allow me to fill more nutrient solution into the bucket. Links for my parts below!
Fogger: https://www.amazon.com/dp/B00PAK245E/ref=cm_sw_r_cp_apa_2mOPAbQSA1JR8
Bucket: https://www.amazon.com/dp/B00A1LUFEY/ref=cm_sw_r_cp_apa_EtOPAbDT328B1
As this is my first foray into plant growing, I just picked stuff essentially at random that looked right. :P
This is the ultrasonic fogger I got: https://www.amazon.com/gp/product/B00PAK245E/
For the first few weeks I only used water, but I switched recently to adding in a small bit of hydro nutrients: https://www.amazon.com/Blue-Gold-Hydroponics-Concentrate-Fertilizer/dp/B01LX3OXNW
The clay pellets suck, so I will advise strongly against them. I'm ordering some rockwool now, and hopefully I can get some more seeds going so I can try it all out.
I can offer you the cheapest alternative here. AGPtEK Aluminum Mist Maker Fog Maker for Water Fountain Pond Rockery Fishtank Vase Birdbath https://www.amazon.com/dp/B00PAK245E/ref=cm_sw_r_cp_apa_dL60AbRBHMP2J
Although the reviews are mediocre, if you have the thing in a tub of water near the plant, it'll definitely do the trick. Kept my 3 x 5 x 8 foot hut at a constant humidity of 33 or higher and raised the humidity near my plant up to 65. Turns on and off automatically depending on if its submerged in water or not, and if you have an electric timer with a small water pump, you're set.
> So I should only be using the light you recommended and natural light?
The reptisun 5.0 will take care of the UVb requirements.
The next element is heat and light.
They need to self regualte their temps
So I use a old fashioned incandescent light bulb A19 these put out a good deal of dafe visible light, no UV and heat as a gentile warming gradient.
Of course natural sunlight is the best.
But since you are up there in the NE and it's going to be COLD and dark you can't provide that to it for a few months.
So... you can get a few 100watt lights here that should take care of it. put that into a 10" reflective dome and you'll have both light and a nice heat gradient for it to move in and out of.
https://www.reddit.com/r/Chameleons/comments/1k9gvx/a_word_on_heat_sources_and_burning_your_animals/
> The humidity lately has been dropping all the way down the zero so that's the only reason I've been misting with the spray bottle.
wow, well do what you can, I'm sure it's not zero inside the home. Usually someone cooking will raise the ambient humidity a few points.
If worse comes to worse you can have a bedroom with everything in it and keep that warmer and with higher humidity than the rest of the home.
The problem with spraying and such is that it can get into the eyes and cause problems (infections)
A little inexpensive fogger
re: screen cages
These are fine but I think the DYI cages are a little bit better sadly I think they're sold out of the 18x18x36 sizes. The 2x2x4 sizes are overkill.